Our Products
A strong yet sensitive balance made of durable washable plastic with sliding compensators for zero adjustment.
Two pan beam balance for accurate and rapid weighing up to 2kg when used with supplementary masses. The balance has centre indicating sliding masses to weigh up to 210gm, spring loaded zero adjust compensator and magnetic damping. Stainless steel pans are 150 mm diameter. cap.2kg
As the cylinder goes down the inclined plane, the double cone goes up, apparently contravening the laws of mechanics. In reality the center of gravity of both moving bodies goes down. Made entirely of wood. Length of the inclined plane: 50 cm. Dimensions of the double cone: 35 cm. Dimensions of the cylinder: 35 cm.
3w LED Head Light with two rechargeable batteriesThis 3W LED headlight is used for General Surgery, ENT and Neurosurgery.
1. It uses high quality material so as to achieve an excellent illumination effect.
2. The head band is adjustable and very light weight as compared to conventional fiber-optic bands.
3. Provided 2 batteries; battery is attached to the headlight itself, so much more convenience.
4. Voltage: 95 to 240v.
5. LED power is 3W6. Color temperature is
6, 000K.
7. Intensity is 30, 000Lx, intensity controller is inbuilt in each battery.
8. Aperture can be adjusted as per requirement.9. Battery working hour is 4 hours, charge time is 4 hours
Technical Specifications: Details: Capacity 2, 000grams Electronic differential scale for use in weighing / balancing centrifuge buckets loaded with blood packs Measures two buckets simultaneously and displays individual weight of bucket. Monitor to display the weight of each bucket. LED with alarm, as soon as the two buckets are balanced. Voltage 220-240VAC Weight Display Panel 4 digit LCD display Accuracy +/- 2 grams #10116
U cut Leg section.
Provided with pair of upholstery Lithotomy Crutches. Upper section with three drawers.Lower section has tow cabinet.
Swinging tray for B.P. Instrument near headrest. Foam mattress with rexine cover supplywith single step stool.Pre Treated with 7 tank chemical treatment. Epoxy Powder Coated.
U cut Leg section.
Provided with pair of upholstery Lithotomy Crutches. Upper section with three drawers.Lower section has tow cabinet.
Swinging tray for B.P. Instrument near headrest. Foam mattress with rexine cover supplywith single step stool.Pre Treated with 7 tank chemical treatment. Epoxy Powder Coated.
New York Demonstration Lever Balance This easy-to-use balance is designed to demonstrate the principle of operation and mechanical advantage of levers.An effective way to help students comprehend the relationship between length of the lever arm, moment of force, and amount of force. When the weights on the lever are adusted to establish equilibrium students will observe the law of torque and its properties. Set Includes: 50cm Meter Stick - 1 pc Knife Edge Clamp - 3 pcs Lever Stand with Base - 1 pc 50g Nickel Plated Hooked Weight - 1 pc 100g Nickel Plated Hooked Weight - 1 pc clamp, 50g hooked mass, To demonstrate several basic principles such as torque, levers, center of gravity.
New York Demonstration Lever Balance This easy-to-use balance is designed to demonstrate the principle of operation and mechanical advantage of levers.An effective way to help students comprehend the relationship between length of the lever arm, moment of force, and amount of force. When the weights on the lever are adusted to establish equilibrium students will observe the law of torque and its properties. Set Includes: 50cm Meter Stick - 1 pc Knife Edge Clamp - 3 pcs Lever Stand with Base - 1 pc 50g Nickel Plated Hooked Weight - 1 pc 100g Nickel Plated Hooked Weight - 1 pc clamp, 50g hooked mass, To demonstrate several basic principles such as torque, levers, center of gravity.
For studying the dependence of moment of inertia on the distribution of mass, by rolling down a metal ring and wooden disk of the same mass and diameter on an inclined plane or rolling them on a level surface with the same initial impulse. Comprised of a metal ring and a wooden disk of diameter 15cm, thickness 5cm and same mass. When these are rolled down on an inclined plane on a level surface with the same initial impulse, the difference in acceleration can be studied
Base made of painted Aluminium/ Cast Iron. The mobile and fixed parts are painted with different colors.
For measuring inertial masses and qualitatively understanding the terms, mass and weight. This principle can be used to determine mass under weightless conditions in space flights.
The apparatus consist of two aluminum trays joined together by a pair of spring steel strips attached to their sides. Trays are about 200mm apart. One of the trays (the oscillating tray) is drilled to hold three equal cylindrical masses and the other tray acting as an anchorage is clamped by a C-clamp to a bench. Supplied with three masses and a cord (does not include a C-clamp). Inertia balance for determining inertial mass. After the apparatus is calibrated by determining the vibration frequency for objects of known mass, it can be used to determine the unknown masses. The Inertia Balance consists of two metal trays connected by stiff steel spring strips. One tray has 3 holes to hold up to three masses and the other tray may be anchored to a table edge or laboratory bench with the included table clamp.Length of steel strip: approx. 350 mmMasses: approx. 175 g each
In a Wimshurst machine, the two insulated discs and their metal sectors rotate in opposite directions passing the crossed metal neutralizer bars and their brushes. An imbalance of charges is induced, amplified, and collected by two pairs of metal combs with points placed near the surfaces of each disk. These collectors are mounted on insulating supports and connected to the output terminals. The positive feedback increases the accumulating charges exponentially until the dielectric breakdown voltage of the air is reached and an electric spark jumps across the gap. 250, 000 Volts. 5 Inch Sparks Banana jacks accept either banana plugs or alligator clips for use as high voltage power supply. No one can mistake a Wimshurst Machine, especially our Classic version. Our metal foil Leyden jars (capacitors) collect static and release all of the energy at once to produce mind melting and eyeball bu ing sparks! 12 inch contra-rotating disks with metal sectors ensure electrostatic induction on demand. Antique, 1800's appearance. Features conductive plastic charge collecting brushes which will not scratch disks. Rigid Victorian styled disk supports and beautifully vaneered wood base make for authentic styling. Adjustable spark gap. Smaller gaps allow for more feequent sparks, while wider settings allow for long but slightly less frequent discharges. 2 Banana jacks allow you to connect test leads - light up xexon flash bulbs, neon lamps, see electrostatic coronas in a dark room! The perfect gift for Star Trek fans of all ages or sparking a child's interest in science!
For introducing the concept that friction depends on the nature and smoothness of materials.The kit consists of three wooden blocks about (l x w), 100 x 75mm, one with a mirror surface on one side, the second with a sandpaper surface and the third with a plane surface. There is a hook on one end in each of the three blocks. Includes a mirror about (l x w), 355 x 75mm.
The newest Ripple Tank, with its sloped plastic surrounds and revolutionary wave dampers, produces clear wave patte without interfering wave reflections from the side. The bright low voltage, White LED enables the wave patte to be projected onto any white surface placed below the tank and these patte s are clearly visible, even without darkening the room. Accsories Included 1 Ripple Tank Base 4 Support legs for base 2 Support arms (to hold rods that support the lamp and wave generator) 1 Electrical wave generator with rheostat control box and cell holder. 1 Support rod for wave generator 2 Light, Metal spring (to suspend wave generator from support rod) 1 LED diode on Arm (Use a 5V1amp. power source) 2 Straight metal barrier/reflectors 1 Short metal barrier 1 Concave/Convex metal reflector 1 Clear Plastic double convex lens 1 Clear Plastic double concave lens 1 Clear Plastic Rectangular Prism 1 Hand held stroboscope, with holder surface
Body: Made of brass.
Size: 86cm (Height) x 36cm (dia) (approx.)
Weight: 8.5 Kg (Approx.) without pan.
Capacity: Sample up to 3000g.
No. of pockets: 38 pockets (cup made in single piece on die, increases accuracy).
Accuracy: 1% on a 1000g sample.
Legs and supports: Powder coated steel.
Material flowing components: No joints, smooth finishing.
Standards: Meets BIS standards.
Collecting pans: 2 No.
Body: Made of brass.
Size: 86cm (Height) x 36cm (dia) (approx.)
Weight: 8.5 Kg (Approx.) without pan.
Capacity: Sample up to 3000g.
No. of pockets: 38 pockets (cup made in single piece on die, increases accuracy).
Accuracy: 1% on a 1000g sample.
Legs and supports: Powder coated steel.
Material flowing components: No joints, smooth finishing.
Standards: Meets BIS standards.
Collecting pans: 2 No.
Mechanically operated, two sectional uniformly perforated CRCA sheet top.
One fix lever handle at-foot end to obtain head raise upto 80 deg.
Strong and precise rectangular steel tube frame work.
Tubular head and leg bows of unequal height with vertical tube supports.
Pre-treated, epoxy coated finish. Locations provided for all
Technical Specification :
Matt Surface : 188 L x 90 W cm.
Overall Size : 208 L x 92 W x 60 H c
Frame made of CRCA pipe.
Two sectional top, head section adjustable on ratchet.
Fitted on four rubber stumps.
Technical Specification :
Size: 183 L x 61 W x 76 H cms.
Laminated board top.
Rectangular frame work mounted on four 5 cm. castors.
Height adjustable with gear-mechanism through side lever.
Pre-treated epoxy coated finish.
Technical Specification :
Top Size : 76 L x 40 W cms.
Height : 76/106 cms (Adj.)