FAIRFLOW & CONTROLS

Makarpura, Vadodara, Gujarat

We are engaged in making available Ball Valves that are durable and usually work to achieve perfect shutoff even after years of disuse. Hence, our Ball Valve is an excellent choice for shutoff applications. This Ball Valve, which we offer, does not offer the fine control that may be necessary in throttling applications but are sometimes used for this purpose. Construction :Our Ball Valveis has asphericaldisc, which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be in line with the port position letting you "see" the valve's position Technical Specifications :

• MOC : SS 304 / SS 316 / SS 202
• Pressure Rating : #150 / #300
• Size Range : To 6
• Design Option : Lever Operated
• End Connection :Flanged / Screwed / Socketweld / Tri Clover
• Design Std : BS 5351 / BS 6755 / API 598

Fairflow & Controls is known as a reliable Manufacturer, Exporter & Supplier of Earthing Plate. Earthing is necessary to eliminate electrostatic/ dynamic discharge to take care of sensitive equipment as well as uninterrupted power supply. The usual or other branded unhealthy grounding/earthing systems can neither damage nor destroy the valuable equipments. Specifications

• MOC : Copper / SS316 / SS304 / Tantalum
• Width : 20600mm
• Thickness : 0.512mm

We can make the Earthing Bar according to your drawings.

Renowned for its high accuracy for gauging flow of high velocity non-vicious fluids, our Flow Nozzle is widely acclaimed in the national as well as international market. We offer Flow Nozzles that are best suited for erosive fluids that can deteriorate even the sharpest edge of an orifice plate. Highlights :

• Ensures high performance
• Long life
• High accuracy of measured fluids
• Can work with even the most erosive fluids

We offer the Level Indicator, which is a self-contained cage designed for use with our top mounting level transmitters or switches. The Level Indicator, which we offer, is constructed using high-grade material that adds and a wide selection of configurations make this cage an ideal means of utilizing the power of our many technologies without mounting directly into the process vessel. Technical Specifications :

• MOC : SS 316L / SS 316 / SS 304 / Brass
• Process Connection : Flange End #150 / #300
• Vent / Drain : NPT(F), NPT(F)
• Dish End : 2, 3 , 4
• Gasket : As per Requirement
• Certification : Corrosion Test - ASTM A262, Prac E/ IBR

Meter run supplied as a complete unit to ensure the necessary straight pipe lengths are available for the highest possible accuracy. They can be supplied with the temperature pocket is required. Corner tapped meter run gives best accuracy and should be used on line size below 50 NB.

• Standard length 24 x pipe diameter( 18D upstream + 6D downstream), extra length on request.
• Standard tapping 1/2 NPT FEMALE one per flange , extra on request.
• Material :-

1. Flange Carbon steel , Low temperature carbon steel, Stainless steel , duplex, Hastalloys, Monel.
2. Tube Carbon steel , Low temperature carbon steel, Stainless steel , duplex, Hastalloys, Monel, other material available on request.

We are engaged in providing Thermowells, which are pocket-drilled from solid bar or built-up using pipes, made from thermally conductive, chemically resistant materials. These Thermowells are used for installing thermocouples, RTDs Temperature Gauges, Temperature Switches etc. on pipe lines or vessels in a plant. The Thermowell can withstand high process pressures and are not affected by either high velocities of process fluids or corrosion caused by them. The Thermowell, which we offer, not only protect the sensors / gauges and prevent failures / down time, but they also facilitate replacement of faulty sensors / gauges without disturbing or shutting down the process or draining the lines / vessels. Technical Specifications :

• Type : Straight / Step Tapered / Full Tapered
• Type of Coating : Teflon / Carbide / Ceramic / PVDF / Lead
• Test : Hydro Test / Bore concentricity test
• ID / OD : As per Customer Specifications
• Length : As per Customer specification

Our Venturi Tubes find use in applications which demand a low pressure on a permanent basis. The Venturi Tube can be used in clean as well as dirty fluids. These Venturi Tubes can be supplied with or without flanges depending upon the job requirement. The Venturi Tubes are used for butt welding on an on-site piping job. Technical Specifications :

• Length : Exact length is depends of the ration of throat to line diameter
• Standard : ISO 5167/BS 1042
• Measurement : The Venturi Tube can measure up to 5%- 20% of differential pressure
• Workability : The Venturi Tubes can work with line sizes ranging from 25 mm to 1800 mm
• Tapping : NPT FEMALE others on request
• Material : carbon steel, low temperature carbon steel, stainless steel, Duplex, Monel and Hastalloys

Applications : Venturi Tubes have high efficacy while working on steam and wet gas application Availability : Welded sheet inlet

We offer the Siphon Tube, which is connected between the pressure gauge and the process. The Siphon Tube is best suited for such applications where high temperature vapors or fluids are present or temperature. The Siphon Tube that we make available acts as a cooling coil, and protects the gauge from high temperature vapors by dissipating heat. A gauge cock is generally connected between the pressure gauge and Siphon Tube for isolation. Technical Specifications :

• Material : SS 316 / SS 304 / Carbon Steel
• Pipe : Pipe Sch 40 or 80 or 120
• Connection Type : MxM, MxF, FxF
• Thread Size : 3/8 or bsp / npt
• Pressure Rating (Sch 40) : 135 bar at 400 deg C (SS) & 150 bar at 400 deg C(Carbon Steel)
• Ideal Working : 65 degree C

Minimum Order Quantity : 01

Manufactured using high-grade material, the Needle Valve is designed for efficient execution of throttling and direct shut off of the liquids, gas or vapors. We offer the Needle Valves in a wide range of end connections as well as stem packings. Technical Specifications :

• Test Pressure :@ 25^oC Room Temperature
• Hydrostatic : Body - 620 bar
• Seat : 415 bar
• Pneumatic : Seat - 40 bar
• Gland Packing : PTFE : Standard
• Graphoil : Temperatures above 180^oC
• Material :A 105, A 479 304, A 479 316, A182 GR F 316, Monel, Hastelloy
• Finish : CS zinc plated. SS Natural

The external chamber is a self-contained cage designed for use with our top mounting level transmitters or switches. Quality construction and a wide selection of configurations make this cage an ideal means of utilizing the power of our many technologies without mounting directly into the process vessel.

• MOC : SS 316L / SS 316 / SS 304 / Brass
• Process Connection : Flange End #150 / #300
• Vent / Drain : NPT(F), NPT(F)
• Dish End : 2, 3 , 4
• Gasket : As per Requirement
• Certification : Corrosion Test ASTM A262, Prac E/ MR0175