Federal India Trading Company

Paldi, Ahmedabad, Gujarat

Neoplast has developed first time in India a fully instrumented Single screw & Twin screw laboratory extruder with integrated date acquisition PLC. This lab extruder can be attached to various downstream equipments to carry out varieties of testing like Filter Test, Extrudability of polymers, studying the problems occurring in R & D as well as in practical applications. Manifold screws, die heads and downstream equipments fulfill all kinds of extrusion task. The sample material is plastified under practice-oriented conditions and extruded through die head. All measuring values such as torque, melt pressure, melt temperature are recorded continuously and represented in the form of tables and graphs parallel to the running test. We are counted among the preeminent single screw laboratory extruder suppliers in India. Salient Features

• The Extruder frame is mounted on four caster wheel with level screw arrangement to fix rigidly on the floor.
• Main Motor with AC variable frequency drive and detachable keyboard.
• For attaching various tooling, the barrel flange is provided with hinge type arrangement for quick opening, dismantling and screw cleaning.
• The maximum output is just 5 kg./hr, which prevents wastage of expensive material under testing.
• The Maximum processing temperature is up to 400C which can be controlled by auto type, dual PID temperature controllers.

Features and Benefits

• R & D tool
• Uses as little as a few grams of material
• Three-part system: Extruder, Optional Take Up, and Chopper Accessories
• Standard configuration provides rod header with replaceable 1/8 (.3175cm) orifice
• Four optional headers available (ribbon, spinerette, tube and wire coating rod)
• Two separate temperature controls: rotor heater and header heater
• Short residence time minimal thermal degradation during mixing process
• Complete processing instrument mixing, compounding and extrusion
• Unique, screwless design
• Maximum temperature 400C
• Variable speed control, 5 to 260rpm
• Water-cooled feed hopper

Description

Wabash presses are specially configured to perform the compression molding of test plaque or bar specimens of Type 1-5 polyethylene. The procedure is in conformance with ASTM Method D 4703, Procedure C. The presses are equipped with heating/cooling platens and a programmable digital controller which has a heating/cooling loop for each platen and built-in program for the required 15/minute +/-2C cooling rate.

Laboratory sealing equipment to make sealing welds using a thermal contact heat sealing technique withexactly defined parameters(sealing time, upper sealing temperature, lower sealing temperature and sealing force). Suitable for all heat sealable films such as Polypropylene, etc. or heat seal compatible compound materials such as coated aluminum films, coated paper, etc. The Laboratory sealer SGPE can be used in all application fields where no hot-tack shall be measured.If you want to measure the tearing force, you will be interested in our Labormaster 3000.Sealing with highest precision.

• The highest priority forhigh accuracyandmaximum reproducibilityof all parameters: upper sealing temperature, lower sealing temperature, sealing time and sealing force.
• All sealing parameters arecalibrated.
• The sealing bars are manufactured with high precision.

Complete monitoring of testing equipment and traceability

• The sealing parameters, upper sealing temperature, lower sealing temperature and sealing force can be checked during a factory calibration with DKD-calibrated measurement equipment (DKD = Deutscher Kalibrierdienst = German Calibration Service).

• Applicable in many fields

The wide range of adjustment of the sealing parameters enables practical re-adjustment for different production conditions.
Many sealing bar versions are available. We will manufacture sealing bars to your requirements on request.
You decide when the sealing time begins: When touching the sealing bars or by reaching the pre-set force.