Our Products
Lollypop Samplers are available in the following shapes:
Paper tube lengths:
We provides Immersion Samplers with varying lengths of paper tubes.
The lengths readily available are 300 mm, 600mm, 900 mm, 1200 mm and 1500 mm.
In addition, there is a flexibility of providing Samplers in the lengths of paper tubes as per customers requirements.
It is a microprocessor based unit, specially designed to fulfill the requirement of a remote and magnified view (Digit Height 5") of temperature reading measured by Model 570 T (4 Digits)/ Ferrolab (6 Digits)
Compensating Cable in different Insulation and application such as PVC/PVC, PVC/Asbestos, PVC/Asbestos/Metal Braided, Teflon (PTFE), Fibre glass/Metal Braided, Neoprene Rubber/Neoprene Rubber, Silicone Rubber. As per BSS/ISI/DIN Specification. Also available multipaire cable for instrumentation.
Mineral Insulated Compensating Extension Cable with Copper sheathed for Pt/Pt-Rh thermocouple. This cable is used for Immersion Lance (for Molten Metal).
With the support of our skilled professionals and high-end technologies, our organization is engaged in offering Thermocouple Cables. This thermocouple cable is used to make the sensing point (or probe part) of the thermocouple. Offered thermocouple cable is manufactured from two dissimilar metals for the purpose of measuring temperature. Our provided thermocouple cables can be availed form us in confine time at competitive price.
These are materials which consist of precision graded coarse and fine refractory grains. They are gelled by means of a binder system in the materials green state. Following the heat-up of the material the binder either transforms or volatilises facilitating the formation of a ceramic bond.
We supply complete range of High Alumina Bicks which offers exelent hardness, strength, spilling resistance, high resitance, in oxidizing & reducing atmosphere and are extomively used in EAF, Blunt Furnaces & Blast Furnaces stove, cement line & ceramic kilns, Glass Tanks, melting of wide range of metal of other general industries.
Radex called expandable heat insulating compounds. These are basically used in steel industries on ladle or tundish and help in producing tallor-made refractory that are at par with international standards. Suiting specific apllications of industries like steel, Glass, Cement, Coke Oven, Re-rolling mills, Sponge iron and others.
Fieldman induction has in-house manufacturing.
Fieldman Induction is manufacturer of Furnace selector switches. Switches can be bifurcated as furnace isolation switch, mechanically manual operated switch, DC isolation switch, pneumatic furnace isolation switch etc. Switches are made from High conductive Silver platted copper blades. This is exclusively use for Induction Furnaces.
Tundish Boards are the disposable Boards used to form an inner lining for continuous casting tundishes. Tundish Boards help in saving energy significantly and also reduce consumption of refractory in tundishes. The Tundish Boards also improves the quality of steel by providing fresh Boards lining whenever the tundish is changed.
Oxygen lance is aHellowelectri welded tube used in various sizes from 1/8'' to 2'' inside diameter. Oxygen lance pipe comes in a variety of end finishes. End caps are provided to prevent contamination.
Generally large furnaces are non tilting in type and use bottom pouring method to take out the molten metal through the tap hole. When the tap hole needs to be opened the same is done with the help of a high frequency induction welded low carbon mild steel tube which can sustaiin 750 psi pressure without leaking of suitable size 8mm NB, 15mm NB or oven 25mm NB in certain cases. Oxygen at high pressure is injected through these tubes into the tape hoel and the molten metal starts flowing. Depending on the type of ferro alloy steel plant or copper or zinc smelter the consumption of the pipe is determined. These lancing pipes are basically used to open the tap holes of bottom pouring furnaces.
Our oxygen lancing pipes with long service life are developed from hot rolled carbon steel. Prior to dispatch of the range to our clients, these are passed through various tests including dimensional checking, hydro testing (pressure test), flattening test and drift test. Global standard lancing pipes are widely accepted for blowing oxygen in electric arc furnace.
Oxygen lancing is a reliable method for tapping heats or for other production operations.
Fieldman Induction has available complete range of Induction Furnace Spares. Our induction melting furnace assembly offers high operational efficiencies with a wide choice of capacities. This is budgetary solution for any melting application.
We have facility to manufacture Induction melting furnace assemblies of the range starting from 100 KG to 10, 000 KG.
Refractory Bed Materials for boilers is made out of high quality refractory aggregates of high alumina contents & dense texture. Refractory Bed Materials for FBC & CFBC boilers is a very exclusive refractory product, processed specially to give smooth fluidization with different fuels under different service conditions.
Refractory cements are mixed with Refractory aggregates (Bauxite, Tabular Alumina, White Fused Alumina, Brown fused alumina, andalusite, Silimanite, Chamotte, Perlite, Vermiculite etc.) and used with various installation techniquest: dry gunning, wet gunning, vibration casting etc. depending on the application.