Pune, Maharashtra, India
Verified
Add Review
Our Products
APPLICATIONS
MARINE & OFFSHORE
OIL RIGS
POWER GENERATION
CONSTRUCTION & MINING
HYDRAULIC EQUIPMENT
TRANSMISSION
INDUSTRIAL EQUIPMENT
BENEFITS
Safety eliminate oil drain
Reduced frictional wear
Reduced new oil purchases up to 90%
Reduced oil related maintenance cost
Improved oil circulation
Reduced equipment downtime
Decreased sludge and varnish deposits
Cooler running engines / equipment
Increased engine efficiency
Payback typically in less than one year
Oil disposal problems eliminated
Controlled oil viscosity
HOW IT WORKS: The contaminated oil enters a magnetic conditioner to remove ferrous particles. The oil is pumped through a metering jet to the tightly compressed cellulose fibre filter element, where all solids down to 1 micron and below are captured, while neutralizing acids and sulphur compounds. The filtered oil then enters the heated evaporation chamber, where water particles are evaporated and vented out. The clean oil is then gravity fed back to the
Filtek has introduced aBilgeKleen, an oily water treatment Unit to separate oil from water and transfer the clear water back to the tank. This consists of a compact coalescer unit to remove floating petroleum products from water / coolant tanks using a floating skimmer and coalescing plates and media. A floating skimmer connected to a suction pump is placed in the bilge tank and transfers the oily water in a separate coalescer tank where theoily wateris dispersed through parallel plates. The coalescing media helps to collate smaller oil droplets into bigger droplets causing oil to float on surface of a liquid and eventually separate out through the tank skimmer in a separate oil collection tank. Clear water is recirculated through a patented 15 micron cartridge back to the bilge tank.
BENEFIT
Filtek introduces a patented productFILTERMAG, which is clamped onto your oil filter within seconds to remove ferrous and steel particles from 40 micron down to 1 micron from your oil. These tiny damage causing particles are not captured by the existing spin onoil filtersin your engine.
FILTERMAGIS completely reusable with a 5 year warranty. Fits metal canisters from 2.5 to 5.5 inch diameter. Typical applications include the following Car / Truck / Bus / Industrial Engines, Suzuki / Hyundai / Ford / Honda / Toyota / TATA Cummins / Leyland / CAT/ KOMATSU / CUMMINS and ALL engines with spin on oil filters.
Portable, Compact Plug & Play 3 LPM Device
2. Fully moulded Aluminum Die Cast Body and Cover.
3. Special Double-layered structure ( Magnetic + Filtration Chamber )
4. 1 micron filtration to NAS 6 and below
5. Quick connect couplings for inlet and outlet on front facia.
6. Magnetic Conditioner (>1000 gauss ) chamber for all Iron particle removal
7. 100 ml water drain chamber
8. Replaceable depth filter 1 micron with woven cotton for moisture adsorption.
9. Low consumable cost.
10. Pressure gauge/Hour Meter and Motor protection.
11. Single Phase 110/220 VAC, 50/60 Hz Motor + 5 LPM Pump
12. Dimensions (LBH) of the Skid are 360 x 370 x 760 mm
13. Total skid weight is 45 Kgs
1. Portable, Compact Plug & Play 7 LPM unit model GR-301
2. Fully moulded Aluminum Die Cast Body and Cover.
3. Special Double-layered structure ( Magnetic + Filtration Chamber )
4. 1 micron filtration to NAS 7 and below
5. Quick connect couplings for inlet and outlet on front facia.
6. Magnetic Conditioner (>1000 gauss ) chamber for all Iron particle removal
7. 100 ml water drain chamber
8. Replaceable depth filter 1 micron with woven cotton for moisture adsorption.
9. Low consumable cost.
10. Pressure gauge/Hour Meter and Motor protection.
11. Single Phase 110/220 VAC, 50/60 Hz Motor + 10 LPM Pump
12. Approximate dimensions (LBH) of the Skid are 400 x 400 x 1200 mm
13. Total skid weight is 65 Kgs
Filtek India (P) Ltd has introduced a Centrifugal Oil Purifier to remove all solid impurities and water from light diesel oils (LDO), diesel, heavy fuel oils (HDO) and mineral oils to ensure reduction in engine wear resulting in extension of equipment life.
