Post Buy Requirement
FL
Coimbatore, Tamil Nadu, India
Add Review

Our Products #2330035

Online Drippers


  • Easy to supply accurate quantity of water to the root zone of all crops

  • Can be fited dirextly or with micro tube of laterals

  • Normal Discharge rate available in 4 lit/hr and 8lit/hr

  • Easy to open and clean

View Complete Details

Drip Line Connectors


  • Low discharge 60 Lph

  • Radius-8 feet

  • Operating pressure- 1.5 kg/cm sq

  • Less labor/ higher distribution and fertigation efficiency

View Complete Details

Flush Valve

  • sizes 40, 50, 63 & 90mm

  • Available sizes- 40, 50, 63 & 90mm

  • Upto 4kg/cm sq operating pressure

  • Reduces deposit buildup in 1/2" and 3/4" distribution tube

  • Flush valves reduce deposits buildup, open and close at low pressure

  • It is used to clean the pipeline and maintain the fresh flow of water.

View Complete Details

Ball Valve

  • sizes 2 1/2", 3"

  • Easy to handle, install, maintenance

  • Corrosion and weather resistant

  • UV stabilized

  • Available sizes- @", 2 1/2", 3"

View Complete Details

End Cap


  • Used to block the tail end of each lateral tube

  • Normal size available are 12mm, 16mm and 20mm

View Complete Details

Drill Bit


  • Used for drilling holes on sub main pipes for fitting start and washer

  • Normal size available are 12mm, 16mm

  • Material of construction- M.S/Plastic

View Complete Details

Punch Tool


  • Used for punching holes on laterals for fitting different nozles and micro tubes

  • Easy to operate

View Complete Details

Air Release Valve


  • To prevent infiltration of toxic substances into drip systems

  • 4kg/ cm sq maximum operating temperature

  • Prevents clogging and back siphoning in 1/2" and 3/4" distribution tubing

View Complete Details

Drip End Cum Valve


  • Sizes available are- 12mm, 16mm

  • The tap can turn on or turn off to control the water flow

  • There are chemical resistant gasket to easy turn on and Turn off

View Complete Details

Venturi Manifold

  • Size 1", 1 1/2", 2", 2 1/2"

  • Used for applying liquid fertilization through drip or sprinkler Irrigation systems

  • Available Size- 1", 1 1/2", 2", 2 1/2"

  • Uniform application of fertilizers or chemicals

  • Save energy and man power

  • Improve fertilizers appluication efficiency

View Complete Details

Sprinkler Nozzle


  • Flow rate- 4-45Lpm (1-12gpm) at nozzle pressure of 135 700k/a

  • Sprinklers are usually made of plastic, brass and steel

  • Available size- 3/4"

  • H76ydraullic pressure- 200 kpa-300kpa

  • Spraying rate- 13-15m

  • It is extensively used in various water saving irrigation are as greenhouse planting, seed cultivation, farmland and gardens etc.

View Complete Details

Rain Gun


  • Made of metals or plastics
    Metal guns are made from alloys of copper , aluminium & zinc
    Plastic part of sprinkler which conduct water

  • Raingun sprinkler are designed to irrigate the area by rotating With the help of gear mechanism

  • Raingun sprinklers shall rotate continusoly and regularly on its designed direction

View Complete Details

Misters

  • Working pressure- 1.5 kg/cm sq
  • Discharge 30 lph/ 40 lph/ 60 lph
  • Radius of throw (feet) 2.5, 3.5, 4.5
  • Hole size 0.85 cm, [1.10mm, 1.40mm
  • Lateral size 16mm
View Complete Details

Fogger

  • pressure 1.5kg/cm sq
  • Discharge 10 LPH
  • Wetted diameter 1.5 m
  • Connecting tube size 6m

  • Working pressure- 1.5kg/cm sq

  • Discharge- 10 LPH

  • Wetted diameter- 1.5 m

  • Maximum number of units possible on a 12mm lateral- 20, 16mm lateral-40

  • Connecting tube size- 6m

View Complete Details

Mini Sprinklers

  • Radius 8 feet
  • pressure 1.5 kg/cm sq

  • Low discharge 60 Lph

  • Radius-8 feet

  • Operating pressure- 1.5 kg/cm sq

  • Less labor/ higher distribution and fertigation efficiency

View Complete Details

Footen Batten Assembly


  • It is used to connect sprinkle nozzle and raingun

  • It joins quick coupled pipes

View Complete Details

Sprinkler Pipes

  • size 2", 2 1/2", 3"

  • Corrosion resistance

  • High tensile strength

  • Widely used for chemical resistance and better flowrate

  • Efficient use of water, fertilizer and electricity in irrigation of a variety of crops like cotton, soyabean, wheat etc.

  • Safety of crops and reduction of soil errossion

  • Normal size- 2", 2 1/2", 3"

View Complete Details

Disc Filter

  • Nominal size 2", 2 1/2", 3"
  • Capacity 20m cube/HR, 30m cube/HOUR, 40m cube/Hour
  • Filter Algae or solid impurities

  • Materials of constructions-M.S and Epoxy painted

  • Nominal size-2", 2 1/2", 3"

  • Capacity- 20m cube/HR, 30m cube/HOUR, 40m cube/Hour

  • Type of media- Crushed granites/Silica/Sand

  • Filter- Algae or solid impurities

View Complete Details

Gravel Filter

  • Size 2", 2 1/2", 3"
  • Capacity 20m cube/HR, 30m cube/HOUR, 40m cube/Hour
  • Filter Algae or solid impurities

  • Materials of constructions-M.S and Epoxy painted

  • Nominal size-2", 2 1/2", 3"

  • Capacity- 20m cube/HR, 30m cube/HOUR, 40m cube/Hour

  • Type of media- Crushed granites/Silica/Sand

  • Filter- Algae or solid impurities

View Complete Details

Hydro Cyclonic Filter

  • Material M.S and epoxy painted
  • Size 2", 2 1/2", 3"
  • Capacity 20m cube/hr, 30m cube/hr, 40m cube/hr

  • Material of construction- M.S and epoxy painted

  • Normal Size- 2", 2 1/2", 3"

  • Capacity to filer- 20m cube/hr, 30m cube/hr, 40m cube/hr

  • Use especially for filtering heavy particles from water sources

  • Like river, Lake, Borewells and open wells

View Complete Details

Column Pipes Violet


  • Corrosion free, easy installation and maintenance.

  • Can bve used upto 800 feet bore wells

  • 10% to 30% extra discharge due to low friction

  • Pipes are joined by a thread rotroust coupler

View Complete Details

HDPE Hoses Pipe


  • Harder, more opaque can withstand higher temperatures upto 90degree c

  • HDPE can be used in sunlight for its life cycle

  • Upto 4inch size can be manafactured in coils

View Complete Details

Online Drip Laterals

  • Diameter 12mm, 16mm

  • Diameter-12mm, 16mm

  • Working pressure range from 1.25kg/m2-2.5kg/m2

  • Used for all kinds of micro irrigation systems such as drip or micro sprinklerr, micro prayer, jets, foggers etc.

  • Directly connected to the sublines, protect from UV degradation for enhancing the life

  • Excellent distribution uniformity.

View Complete Details

Rain Gun Sprinkler

Allows application of water under high pressure with the help of a pump. It releases water similar to rainfall through a small diameter nozzle placed in the pipes. Water is distributed through a system of pipes, sprayed into air and irrigates most of the soil types due to wide range of discharge capacity.Eliminates water conveyance channels thereby reducing conveyance loss.Water saving upto 30%-50%Reduces soil compaction, Provides frost protection and helps in alteration of micro climate.Suitable for irrigation where plant population per unit is very high.
View Complete Details

Online Dripper

Precise and regulated application of irrigated water and plant nutrients at low pressure and frequent intervals through drippers emitted directly onto the root zone of plant with the help of close network of pipes.Improves quality and ensures early maturity of crops, Fertigation can be made efficiently, Soil erosion is eliminated and saves fertilizer (30%) and labour cost(10%)
View Complete Details

HDPE Hose Pipe

Flowtech products are known for their precision, efficiency, dependability and performance.The products are economical and require very little maintenance. The Companys products are Drip Irrigation Systems, Sprinkler Irrigation Systems, HDPE Pipes, PVC & UPVC Pipes.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Hema (FlowtechPower)
  • No. 18, New Scheme Road, Pappanaicken Palayam, - 641037, Papanaickenpalayam, - 641037, Pappanaickenpalayam, Coimbatore, Tamil Nadu, India
  • Share us via
Browse Our Products list of FlowtechPower Coimbatore, Tamil Nadu
Post Buy Requirement
FL
Coimbatore, Tamil Nadu, India
Add Review

Our Products #2330035

Online Drippers


  • Easy to supply accurate quantity of water to the root zone of all crops

  • Can be fited dirextly or with micro tube of laterals

  • Normal Discharge rate available in 4 lit/hr and 8lit/hr

  • Easy to open and clean

View Complete Details

Drip Line Connectors


  • Low discharge 60 Lph

  • Radius-8 feet

  • Operating pressure- 1.5 kg/cm sq

  • Less labor/ higher distribution and fertigation efficiency

View Complete Details

Flush Valve

  • sizes 40, 50, 63 & 90mm

  • Available sizes- 40, 50, 63 & 90mm

  • Upto 4kg/cm sq operating pressure

  • Reduces deposit buildup in 1/2" and 3/4" distribution tube

  • Flush valves reduce deposits buildup, open and close at low pressure

  • It is used to clean the pipeline and maintain the fresh flow of water.

View Complete Details

Ball Valve

  • sizes 2 1/2", 3"

  • Easy to handle, install, maintenance

  • Corrosion and weather resistant

  • UV stabilized

  • Available sizes- @", 2 1/2", 3"

View Complete Details

End Cap


  • Used to block the tail end of each lateral tube

  • Normal size available are 12mm, 16mm and 20mm

View Complete Details

Drill Bit


  • Used for drilling holes on sub main pipes for fitting start and washer

  • Normal size available are 12mm, 16mm

  • Material of construction- M.S/Plastic

View Complete Details

Punch Tool


  • Used for punching holes on laterals for fitting different nozles and micro tubes

  • Easy to operate

View Complete Details

Air Release Valve


  • To prevent infiltration of toxic substances into drip systems

  • 4kg/ cm sq maximum operating temperature

  • Prevents clogging and back siphoning in 1/2" and 3/4" distribution tubing

View Complete Details

Drip End Cum Valve


  • Sizes available are- 12mm, 16mm

  • The tap can turn on or turn off to control the water flow

  • There are chemical resistant gasket to easy turn on and Turn off

View Complete Details

Venturi Manifold

  • Size 1", 1 1/2", 2", 2 1/2"

  • Used for applying liquid fertilization through drip or sprinkler Irrigation systems

  • Available Size- 1", 1 1/2", 2", 2 1/2"

  • Uniform application of fertilizers or chemicals

  • Save energy and man power

  • Improve fertilizers appluication efficiency

View Complete Details

Sprinkler Nozzle


  • Flow rate- 4-45Lpm (1-12gpm) at nozzle pressure of 135 700k/a

  • Sprinklers are usually made of plastic, brass and steel

  • Available size- 3/4"

  • H76ydraullic pressure- 200 kpa-300kpa

  • Spraying rate- 13-15m

  • It is extensively used in various water saving irrigation are as greenhouse planting, seed cultivation, farmland and gardens etc.

View Complete Details

Rain Gun


  • Made of metals or plastics
    Metal guns are made from alloys of copper , aluminium & zinc
    Plastic part of sprinkler which conduct water

  • Raingun sprinkler are designed to irrigate the area by rotating With the help of gear mechanism

  • Raingun sprinklers shall rotate continusoly and regularly on its designed direction

View Complete Details

Misters

  • Working pressure- 1.5 kg/cm sq
  • Discharge 30 lph/ 40 lph/ 60 lph
  • Radius of throw (feet) 2.5, 3.5, 4.5
  • Hole size 0.85 cm, [1.10mm, 1.40mm
  • Lateral size 16mm
View Complete Details

Fogger

  • pressure 1.5kg/cm sq
  • Discharge 10 LPH
  • Wetted diameter 1.5 m
  • Connecting tube size 6m

  • Working pressure- 1.5kg/cm sq

  • Discharge- 10 LPH

  • Wetted diameter- 1.5 m

  • Maximum number of units possible on a 12mm lateral- 20, 16mm lateral-40

  • Connecting tube size- 6m

View Complete Details

Mini Sprinklers

  • Radius 8 feet
  • pressure 1.5 kg/cm sq

  • Low discharge 60 Lph

  • Radius-8 feet

  • Operating pressure- 1.5 kg/cm sq

  • Less labor/ higher distribution and fertigation efficiency

View Complete Details

Footen Batten Assembly


  • It is used to connect sprinkle nozzle and raingun

  • It joins quick coupled pipes

View Complete Details

Sprinkler Pipes

  • size 2", 2 1/2", 3"

  • Corrosion resistance

  • High tensile strength

  • Widely used for chemical resistance and better flowrate

  • Efficient use of water, fertilizer and electricity in irrigation of a variety of crops like cotton, soyabean, wheat etc.

  • Safety of crops and reduction of soil errossion

  • Normal size- 2", 2 1/2", 3"

View Complete Details

Disc Filter

  • Nominal size 2", 2 1/2", 3"
  • Capacity 20m cube/HR, 30m cube/HOUR, 40m cube/Hour
  • Filter Algae or solid impurities

  • Materials of constructions-M.S and Epoxy painted

  • Nominal size-2", 2 1/2", 3"

  • Capacity- 20m cube/HR, 30m cube/HOUR, 40m cube/Hour

  • Type of media- Crushed granites/Silica/Sand

  • Filter- Algae or solid impurities

View Complete Details

Gravel Filter

  • Size 2", 2 1/2", 3"
  • Capacity 20m cube/HR, 30m cube/HOUR, 40m cube/Hour
  • Filter Algae or solid impurities

  • Materials of constructions-M.S and Epoxy painted

  • Nominal size-2", 2 1/2", 3"

  • Capacity- 20m cube/HR, 30m cube/HOUR, 40m cube/Hour

  • Type of media- Crushed granites/Silica/Sand

  • Filter- Algae or solid impurities

View Complete Details

Hydro Cyclonic Filter

  • Material M.S and epoxy painted
  • Size 2", 2 1/2", 3"
  • Capacity 20m cube/hr, 30m cube/hr, 40m cube/hr

  • Material of construction- M.S and epoxy painted

  • Normal Size- 2", 2 1/2", 3"

  • Capacity to filer- 20m cube/hr, 30m cube/hr, 40m cube/hr

  • Use especially for filtering heavy particles from water sources

  • Like river, Lake, Borewells and open wells

View Complete Details

Column Pipes Violet


  • Corrosion free, easy installation and maintenance.

  • Can bve used upto 800 feet bore wells

  • 10% to 30% extra discharge due to low friction

  • Pipes are joined by a thread rotroust coupler

View Complete Details

HDPE Hoses Pipe


  • Harder, more opaque can withstand higher temperatures upto 90degree c

  • HDPE can be used in sunlight for its life cycle

  • Upto 4inch size can be manafactured in coils

View Complete Details

Online Drip Laterals

  • Diameter 12mm, 16mm

  • Diameter-12mm, 16mm

  • Working pressure range from 1.25kg/m2-2.5kg/m2

  • Used for all kinds of micro irrigation systems such as drip or micro sprinklerr, micro prayer, jets, foggers etc.

  • Directly connected to the sublines, protect from UV degradation for enhancing the life

  • Excellent distribution uniformity.

View Complete Details

Rain Gun Sprinkler

Allows application of water under high pressure with the help of a pump. It releases water similar to rainfall through a small diameter nozzle placed in the pipes. Water is distributed through a system of pipes, sprayed into air and irrigates most of the soil types due to wide range of discharge capacity.Eliminates water conveyance channels thereby reducing conveyance loss.Water saving upto 30%-50%Reduces soil compaction, Provides frost protection and helps in alteration of micro climate.Suitable for irrigation where plant population per unit is very high.
View Complete Details

Online Dripper

Precise and regulated application of irrigated water and plant nutrients at low pressure and frequent intervals through drippers emitted directly onto the root zone of plant with the help of close network of pipes.Improves quality and ensures early maturity of crops, Fertigation can be made efficiently, Soil erosion is eliminated and saves fertilizer (30%) and labour cost(10%)
View Complete Details

HDPE Hose Pipe

Flowtech products are known for their precision, efficiency, dependability and performance.The products are economical and require very little maintenance. The Companys products are Drip Irrigation Systems, Sprinkler Irrigation Systems, HDPE Pipes, PVC & UPVC Pipes.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Hema (FlowtechPower)
  • No. 18, New Scheme Road, Pappanaicken Palayam, - 641037, Papanaickenpalayam, - 641037, Pappanaickenpalayam, Coimbatore, Tamil Nadu, India
  • Share us via