Wall plaster spraying machine is engineered by FRIGMAIRES in collaboration with BAUMANN, Germany. These are TuV, CE, GS and ISO 9001 certified and acclaimed for longer service life. These are engineered using best available techniques and following international industrial standard. These are admired for unique design, compact size and high functional efficiency.

• FRIGMAIRES iM4 is a very compact, flexible and efficient mixing pump.
• FRIGMAIRES iM4 Buddy is designed to process almost all pumpable pre-mixed dry mortars of grain size
• Up to 4 mm diameter. Fully equipped with a reliable compressor and a high performance water pump.
• Easy to disassemble and easy to transport.
• FRIGMAIRES iM4 your best Buddy in every job site
• Unique Design, Powerful, Reliable
• iM4 Buddy is the all-rounder amongst plastering machines, well known in many markets. With a 200
• l/min air compressor and powerful 5,5W pump drive it can handle most pumpable dry mixed mortars

Transportation

• Working the FRIGMAIRES iM4 Buddy is easy. The logic design of the machine makes it easy to operate
• Even for workers who never used a mixing pump before. Water flow control ... on the iM4 it is all at the right place, easy to understand and easy to operate.
• Anytime and anywhere

Operation:

• MOC: SS304 with MS component plate
• Controller: Solid state electronic controller with photoelectric sensor
• Changing rotor/stator? Even this maintenance task is easy and can be done in a few minutes. With a fold-up mixing tube, the integrated mounting aid, the iM4 Buddy is great Buddy and a great assistant.

Accessories Included:

• Remote Control
• Mortar Hose
• Spray Gun
• Operation Manual
• Sponge Balls

Applications perfect for the FRIGMAIRES iM4 Buddy:

• Interior Plaster
• Lime Cement Render
• Cement Sand Render
• Gypsum Plaster
• Skim Coat
• Fire Proofing Mortars
• Reinforcement Mortars
• Adhesive Mortars
• Self Levelling Mortars

A reliable Buddy for every application with an output ranging between 5 and 40 l/min (depending on rotor / stator used) and operating pressure of up to 40 bar.

Technical Data:

• Pump type: D5, 2.5 B Power
• Theor delivery rate: 25 l/min
• Delivery pressure: 40 bar
• Delivery distance: Up to 40 m horizontally, 15 m high
• Air compressor: 0.55 kW/ 200 l/min
• Drive pump: 400 V / 50 Hz / 5.5 kW, 392 rpm
• Drive hopper: 1.1 kW at 23 rpm
• Tank capacity: 1151
• Water pump: 0.78 kW at 3.4 m /h
• Weight: 240 kg
• Length: 1,324 mm
• Width: 728 mm
• Height: 1,443 mm
• Filling height: 984 mm
• Discharge connection: M 35
• Maximum grain size: 4 mm
• Part No: B99 253 0001
• The delivery rate depends on the rotor/stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower.

Wall plaster spraying machine is engineered by FRIGMAIRES in collaboration with BAUMANN, Germany. These are TuV, CE, GS and ISO 9001 certified and acclaimed for longer service life. These are engineered using best available techniques and following international industrial standard. These are admired for unique design, compact size and high functional efficiency.

• FRIGMAIRES iM4 is a very compact, flexible and efficient mixing pump.
• FRIGMAIRES iM4 Buddy is designed to process almost all pumpable pre-mixed dry mortars of grain size
• Up to 4 mm diameter. Fully equipped with a reliable compressor and a high performance water pump.
• Easy to disassemble and easy to transport.
• FRIGMAIRES iM4 your best Buddy in every job site
• Unique Design, Powerful, Reliable
• iM4 Buddy is the all-rounder amongst plastering machines, well known in many markets. With a 200
• l/min air compressor and powerful 5,5W pump drive it can handle most pumpable dry mixed mortars

Transportation

• Working the FRIGMAIRES iM4 Buddy is easy. The logic design of the machine makes it easy to operate
• Even for workers who never used a mixing pump before. Water flow control ... on the iM4 it is all at the right place, easy to understand and easy to operate.
• Anytime and anywhere

Operation:

• MOC: SS304 with MS component plate
• Controller: Solid state electronic controller with photoelectric sensor
• Changing rotor/stator? Even this maintenance task is easy and can be done in a few minutes. With a fold-up mixing tube, the integrated mounting aid, the iM4 Buddy is great Buddy and a great assistant.

Accessories Included:

• Remote Control
• Mortar Hose
• Spray Gun
• Operation Manual
• Sponge Balls

Applications perfect for the FRIGMAIRES iM4 Buddy:

• Interior Plaster
• Lime Cement Render
• Cement Sand Render
• Gypsum Plaster
• Skim Coat
• Fire Proofing Mortars
• Reinforcement Mortars
• Adhesive Mortars
• Self Levelling Mortars

A reliable Buddy for every application with an output ranging between 5 and 40 l/min (depending on rotor / stator used) and operating pressure of up to 40 bar.

Technical Data:

• Pump type: D5, 2.5 B Power
• Theor delivery rate: 25 l/min
• Delivery pressure: 40 bar
• Delivery distance: Up to 40 m horizontally, 15 m high
• Air compressor: 0.55 kW/ 200 l/min
• Drive pump: 400 V / 50 Hz / 5.5 kW, 392 rpm
• Drive hopper: 1.1 kW at 23 rpm
• Tank capacity: 1151
• Water pump: 0.78 kW at 3.4 m /h
• Weight: 240 kg
• Length: 1,324 mm
• Width: 728 mm
• Height: 1,443 mm
• Filling height: 984 mm
• Discharge connection: M 35
• Maximum grain size: 4 mm
• Part No: B99 253 0001
• The delivery rate depends on the rotor/stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower.