We are here to guide our clients with the secure payment procedures. With us, the customers get convenience to pay through both online and offline payment methods Only premium packaging material has been used for the safe packing of our products which ensures that only defect-free range is delivered at buyer's end. Adequate packaging assures the safe transit and flawless delivery.

Association with trusted vendors enabled us to meet the quality expectations of the clients. We source only premium-grade raw materials from the reliable sources after complete checking. We make sure that the products that we deliver will remain completely damage free as we make use of the quality packaging material and have skilled personnel for the packing of the products.

Buyers can place bulk as well as urgent orders with us and we make sure to deliver the same on time. Raw materials that we use for the production of the finished products are bottleneck assets and thus are highly essential. We strictly check the entire lot of raw materials before procurement.

Specifications :

• Diameter
• Input Voltage
• Range
• Gear Ratio (w) or Pulses per Km or Mile
• Size of Connector

 

Note:

Dial range as mentioned above but can be changed to suit your requirement. Also other modification/non-standard specifications possible in case of bulk supply.

Features :

• Electronic Tachometers are available in 80 and 85 mm diameter of housing.
• Input: - Magnetic Pick up
• - Alternator/Ignition coil.Full scale Hz. = Pulses per Revolution x Full Scale RPM60
• Pulses per Revolution = No. of Poles x Pulley Ratio2
• Pulley Ratio = Crankshaft Pulley Diameter
• Alternator Pulley Diameter
• Cross coil moving magnet air-cored movement driven by electronic circuit.

 

Specifications :

• DiameterInput: Magnetic pick/alternatorVoltage
• RPM RangeFull scale Hz. or No. of Poles and Pulley Ratio or Pulse per Revolution

 

Note:

Dial range as mentioned above but can be changed to suit your requirement.Also other modification / non-standard specifications possible in case of bulk supply

Be cash payment or bank transfer, we are capable of making transactions using them all. Worry not! We have organized and maintained database to keep a stern check on the transactions made. Be it packaging small or large consignments, light or heavy products, we use the finest material to provide cost efficient and sustainable packaging solutions.

Our Tachometers are suitable for fly wheel having 50-305 teeth. Installation instruction: (Ignitioncoil/Alternator input).Set Dip switches as per chart given with Gauge.

 

Specifications :

• Diameter
• Input: Alternator/Ignition Coil
• Voltage
• Range
• Full scale Hz. or No. of Poles and Pulley Ratio or Pulses per Revolution

 

Installation Instructions (Magnetic Sensor Input)

• Find full scale frequency (Hz.)
• Full Scale Frequency (Hz.) = No. of fly wheel teeth x F.S. range 60.e. for 150 fly wheel teeth application for 4000 RPM
• F.S. Frequency (Hz.) = 150 x 4000 = 10000 Hz.60
• Set Dip Switches as per chart with gauge.

Features :

• Fuel Senders are available in wire wound bobbin and TFR bobbin.
• Fuel Senders are available in Casting and Sheet metal.
• Fitment type with holes
• Type of Float
• Resistance value

With us, payment transactions will always remain secured as we follow reliable online payment gateway that is handled by a trusted e-commerce application service provider. We are working in close coordination with the management and team members; they follow strict warehousing norms. We are able to keep the whole batch away from diverse damaging factors including sunlight, dust, moisture and rain.

Being a quality-conscious firm, we make sure that the offered lot is prepared using the world-class raw material and modern work methods. Also, we source it from the certified vendors. We are immensely accredited for delivering the orders within the stipulated time frame as we have the latest transportation facilities.

Specifications :

• Diameter
• Gear Ratio
• Dial Range
• Sweep Angle
• Odometer digit
• Movement: Clockwise or Anti-clockwise
• End fitment: Square 2.6mm with mounting thread size indicating type as shownin diagram (such as ‘A’/‘B’/‘C’ etc).

 

Note :

Dial range as mentioned above but can be changed to suit your requirement. Also other modification/ non-standard specifications possible in case of bulk supply.

We are here to guide our clients with the secure payment procedures. With us, the customers get convenience to pay through both online and offline payment methods Only premium packaging material has been used for the safe packing of our products which ensures that only defect-free range is delivered at buyer's end. Adequate packaging assures the safe transit and flawless delivery.

Association with trusted vendors enabled us to meet the quality expectations of the clients. We source only premium-grade raw materials from the reliable sources after complete checking. We make sure that the products that we deliver will remain completely damage free as we make use of the quality packaging material and have skilled personnel for the packing of the products.

Buyers can place bulk as well as urgent orders with us and we make sure to deliver the same on time. Raw materials that we use for the production of the finished products are bottleneck assets and thus are highly essential. We strictly check the entire lot of raw materials before procurement.

Specifications :

• Diameter
• Input Voltage
• Range
• Gear Ratio (w) or Pulses per Km or Mile
• Size of Connector

 

Note:

Dial range as mentioned above but can be changed to suit your requirement. Also other modification/non-standard specifications possible in case of bulk supply.

Features :

• Electronic Tachometers are available in 80 and 85 mm diameter of housing.
• Input: - Magnetic Pick up
• - Alternator/Ignition coil.Full scale Hz. = Pulses per Revolution x Full Scale RPM60
• Pulses per Revolution = No. of Poles x Pulley Ratio2
• Pulley Ratio = Crankshaft Pulley Diameter
• Alternator Pulley Diameter
• Cross coil moving magnet air-cored movement driven by electronic circuit.

 

Specifications :

• DiameterInput: Magnetic pick/alternatorVoltage
• RPM RangeFull scale Hz. or No. of Poles and Pulley Ratio or Pulse per Revolution

 

Note:

Dial range as mentioned above but can be changed to suit your requirement.Also other modification / non-standard specifications possible in case of bulk supply

Be cash payment or bank transfer, we are capable of making transactions using them all. Worry not! We have organized and maintained database to keep a stern check on the transactions made. Be it packaging small or large consignments, light or heavy products, we use the finest material to provide cost efficient and sustainable packaging solutions.

Our Tachometers are suitable for fly wheel having 50-305 teeth. Installation instruction: (Ignitioncoil/Alternator input).Set Dip switches as per chart given with Gauge.

 

Specifications :

• Diameter
• Input: Alternator/Ignition Coil
• Voltage
• Range
• Full scale Hz. or No. of Poles and Pulley Ratio or Pulses per Revolution

 

Installation Instructions (Magnetic Sensor Input)

• Find full scale frequency (Hz.)
• Full Scale Frequency (Hz.) = No. of fly wheel teeth x F.S. range 60.e. for 150 fly wheel teeth application for 4000 RPM
• F.S. Frequency (Hz.) = 150 x 4000 = 10000 Hz.60
• Set Dip Switches as per chart with gauge.

Features :

• Fuel Senders are available in wire wound bobbin and TFR bobbin.
• Fuel Senders are available in Casting and Sheet metal.
• Fitment type with holes
• Type of Float
• Resistance value

With us, payment transactions will always remain secured as we follow reliable online payment gateway that is handled by a trusted e-commerce application service provider. We are working in close coordination with the management and team members; they follow strict warehousing norms. We are able to keep the whole batch away from diverse damaging factors including sunlight, dust, moisture and rain.

Being a quality-conscious firm, we make sure that the offered lot is prepared using the world-class raw material and modern work methods. Also, we source it from the certified vendors. We are immensely accredited for delivering the orders within the stipulated time frame as we have the latest transportation facilities.

Specifications :

• Diameter
• Gear Ratio
• Dial Range
• Sweep Angle
• Odometer digit
• Movement: Clockwise or Anti-clockwise
• End fitment: Square 2.6mm with mounting thread size indicating type as shownin diagram (such as ‘A’/‘B’/‘C’ etc).

 

Note :

Dial range as mentioned above but can be changed to suit your requirement. Also other modification/ non-standard specifications possible in case of bulk supply.