Welcome User

Testing Equipment

Our Complete range of products are Portable Hardness Tester, Brinell Hardness Tester, Micro Hardness Tester, Rockwell Hardness Tester and Vickers Hardness Tester.

Portable Hardness Tester

  • Min. Order (MOQ) 1 Piece(s)

The device works with both ultrasonic contact impedance (UCI) and dynamic (Leeb) probes. User get the benefits of two methods of measurement  it is the maximum that can be obtained from a portable hardness tester. Dynamic (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc. The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers. Combined Hardness Tester specifications: UCI probe types - 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) Leeb probe types - D, DC, DL, C, D+15, E, G Indenter - Diamond Indenter (UCI), Hardened ball (Leeb) Measuring direction - Any direction 360° Data storage - Limited only by the memory card Measurement hardness range- Rockwell, HRC - 20 - 70 Brinell, HB - 90 - 450 Vickers, HV - 230 - 940 temporary resistance (tensile strength), MPa - 370 1740 Measuring accuracy - HV+ / - 3%; HRC+ / - 1, 5%; HB+ / - 3%; Hardness scale - HRC, HB, HV, MPa Operating temperature range, °C - -20 to +50 Power supply - 2 AA batteries Instrument dimensions - 120x60x25 mm Weight of electronic unit with batteries - 0.2 kg (without probes) Battery life - Not less 20 hours Standard set of Hardness Tester  Electronic unit, UCI probe, Leeb probe, 2 batteries AA, Charger, USB cable, Operating manual, Software for PC, Case.

View Complete Details

Brinell Hardness Tester

  • Voltage 415v
  • Depth of Throat 200 Mm
  • Size 370x670 370x670 Mm
  • Max test height 410mm
  • Machine Height 1127 Mm
  • Drive Motor 0.33hp

Brinell Hardness Tester , are designed for Brinell hardness measurement on steels and other ferrous materials and also on non ferrous materials like Brass, Bronze, Aluminium, etc. the material can be cast, forged or rolled and the shape can be flat, round irregular. The actual load application system is of dead weight type combined with mechanical lever system. The supporting hydraulic system is for initial of load before each test and damping the load application system for smooth application of load. A separate hydraulic power pack, positioned in the bottom part of the machine increase the machine stability. Design of a floating fulcrum lever system ensures high accuracy and dependability. The machine accuracies confirm to IS: 2281-2005 & BS: 240

  • Technical Specifications
    Loads (kgf) 500 to 3000 in steps of 250
    Initial load (kgf) 250
    Max. test height x throat (mm) 380 x 200
    Max. depth of elevating screw below base (mm) 180
    Machine height (mm) approx. 1145
    Size of base (mm) approx. 400 x 740
    Net weight (kg) 325
    Drive motor (hp) 0.50
    Mains supply 3 Phase, 415V, 50Hz, A.C
    Indentation measurement By separate Or Built in Microscope
View Complete Details

Micro Hardness Tester

  • Color Multicolor
  • Voltage 220V
  • Application Labouratory Use
  • Frequency 60Hz
  • Power 1-3kv
  • Feature Durable, Easy To Use, Electrical Porcelain
  • Warranty 1year
  • Temperature High Temperature
  • Automation Grade Automatic

Micro vickers hardness tester is designed to cater heavy duty and research work with all the necessary automation for loading and measurements. Hardness conversion is also possible with our micro hardness tester. With the computerized attachment, one can convert manual hardness to computerized one, which enables higher accuracy and operator ease. It is easy to get the micro hardness value by just clicking two diagonals of indentation image on the computer screen. The computer attached to our micro hardness tester helps to store and print the readings, images and graphs. Test load :  load capacity - 10gf to 1000 gf (0.098, 0.246, 0.49, 0.98, 1.96, 2.94, 4.9, 9.80 n) 10, 25, 50, 100, 200, 300, 500, 1000 gmf dial switchable Dwell time :  5 - 60 seconds Loading mechanism :  motorized loading and releasing Indexing :  rotating turret for indenter and objective lens Objective For scanning 10 x, plan achromatic 0.25 na For measurement 40 x, plan achromatic 0.4 na Our micro hardness tester with model mvh-ii consists of 1/2" ccd camera (high resolution monochrome) with interface adaptor Image grabber hardware Dedicated image processing software for vickers hardness number Effective case depth hardness graph

View Complete Details

Rockwell Hardness Tester

  • Color Multicolor
  • Voltage 110V
  • Frequency 50Hz, 60Hz
  • Power 1-3kv, 3-5kv
  • Warranty 1year
  • Feature Durable, Easy To Use, Electrical Porcelain
  • Automation Grade Automatic

Rockwell Brinell Hardness Tester is designed for measuring hardness of metal and alloy of all kinds, be it hard or soft. The Rockwell Brinell Hardness Tester that we offer can also effectively measure round, flat or irregular shaped materials. Our Rockwell Brinell Hardness Tester comes with automatic weight selection and automatic zero setting dial gauges, which can efficiently scale HRA, HRB and HRC by using different types of indenters (Diamond/ Ball). The Rockwell Brinell Hardness Tester strictly conforms to IS: 1586- 2000. We also offer motorized versions of Rockwell Brinell Hardness Tester to the global clients. Load Capacity Minor load : 10 kgf Major loads :  60, 100, 150 kgf. 15, 30, 45 (Rockwell Superficial) and 187.5, 250 (Brinell). Specifications Extra test height Throat of 295 x 148 mm Application Area Laboratories Tool rooms Heat treatment shops R&D departments Inspection departments Foundries Educational institutions

View Complete Details

Vickers Hardness Tester

  • Voltage 220v
  • Material Metal
  • Depth of throat 0.001mm
  • Scale Least Count 0.001mm
  • Optical magnification 70 X
  • Max Test Height 200 Mm

We are a credible Manufacturer & Exporter of Vickers Hardness Tester . We supply both Computerized and Manual Vickers Hardness Testers. The Vickers Hardness Testers are used for measuring Vickers hardness of steel and metals of all types suitable for Small, Hard and thin specimen for case hardened or coated jobs of low case depth. The fully Computerized System is used for Indentation measurement and displays, on in-Built Industrial PC. It comes with touch screen facility. Vickers Hardness is measured using image processing techniques based on conditional edge detection & noise reduction achieved through computer vision. The compiled algorithm conceives into highly accurate, repeatable and faster output then conventional methodology. On the other hand, the Auto/ Manual measurement modes along with exhaustive analytics built in the system helps capturing all results and analyze at will. Specially designed multi element lens system with dual illumination technology offers constant magnification regardless of lens focal point. Specifications 2 Mega pixel active CMOS sensor, which contains photo detector and an active amplifier offers sharper image than any CCD camera available Image magnification : 75 X Least Count : 0.0005mm Vickers Test Load : 5, 10, 15, 20, 30, 40 & 50 Kgf Selection of test loads : By push button Hardness measurement range : 35 to 1850HV (For Each load there is different range) Test Height x Throat : 245 x120 mm Accuracy of Measurement of Loads : +/- 1% Indirect Verification : By standard test block Conforms to Standard IS:1754 Machine Size (Approx) : LWH 660x320x990 mm Total Weight of the Machine : 175 Kgs

View Complete Details

Rockwell Brinell Hardness Tester

  • Material Metal
  • Display Analog
  • Vertical space 230mm
  • Application Industrial
  • Machine Weight 85 Kg
  • Depth Of Throat 155

We are one of the reputed Manufacturers and Exporters of Rockwell Brinell Hardness Tester from Pune, Maharashtra. Rockwell Brinell Hardness Tester is designed for measuring hardness of metal and alloy of all kinds, be it hard or soft. The Rockwell Brinell Hardness Tester that we offer can also effectively measure round, flat or irregular shaped materials. Our Rockwell Brinell Hardness Tester comes with automatic weight selection and automatic zero setting dial gauges, which can efficiently scale HRA, HRB and HRC by using different types of indenters (Diamond/ Ball). The Rockwell Brinell Hardness Tester strictly conforms to IS: 1586- 2000. We also offer motorized versions of Rockwell Brinell Hardness Tester to the global clients. Load Capacity Minor load : 10 kgf Major loads : 60, 100, 150 kgf. 15, 30, 45 (Rockwell Superficial) and 187.5, 250 (Brinell). Specifications Extra test height Throat of 295 x 148 mm Application Area Laboratories Tool rooms Heat treatment shops R&D departments Inspection departments Foundries Educational institutions

View Complete Details

Portable Dynamic Hardness Tester

  • Material Steel, Iron, Copper, Zinc Etc
  • Power 2 Pencil Cells
  • Battery Pack 2 X Aa Batteries
  • Weight 200 G
  • Product Type Digital
  • Memory Yes

Portable Dynamic Hardness Tester that we offer has built in conversion facility for the given material to convert value to Vickers (HV), Rockwell (HRB, HRC), Brinell (HB), UTS scales, which can be selected accordingly by pressing arrow keys. Our Portable Dynamic Hardness Tester has 30 hardness scales for different probes, which is selected by feather touch keys. Our Portable Dynamic Hardness Tester has user-friendly operator with alpha numeric display (16 characters x 2 lines), where the display indicates selected material, scale combination and hardness value. Our Portable Dynamic Hardness Tester has the capacity to store 100 readings and can be easily connected to dot matrix printer. Usage In confined spaces Large and heavy components Permanently installed parts

View Complete Details

microhardness tester

Micro vickers hardness tester is designed to cater heavy duty and research work with all the necessary automation for loading and measurements. Hardness conversion is also possible with our micro hardness tester. With the computerized attachment, one can convert manual hardness to computerized one, which enables higher accuracy and operator ease. It is easy to get the micro hardness value by just clicking two diagonals of indentation image on the computer screen. The computer attached to our micro hardness tester helps to store and print the readings, images and graphs.

View Complete Details

Optical Brinell Hardness Tester

  • Frequency 50 Hz
  • Load Capacity 500 To 3000 In Stages Of 250 Kgf
  • Depth of Throat 200 Mm
  • Weight 500 Kg
  • Automation Grade Automatic
  • Ball Type Selection Tungsten /steel

The company is a notable Optical Brinell Hardness Tester Manufacturer and Exporter in India. Our Optical Brinell Hardness Tester is designed for the measurement of hardness in steel and other ferrous and non-ferrous materials like Brass, Bronze, Aluminum, etc. The material which is to be measured by our Optical Brinell Hardness Tester can be casted, forged or rolled. Our Optical Brinell Hardness Tester can effectively measure any shaped material, be it flat, round or irregular. Our Optical Brinell Hardness Tester has dead weight type actual load application system with mechanical lever system. The design of floating fulcrum lever system in our Optical Brinell Hardness Tester ensures high accuracy and dependability. While, a separate hydraulic power pack, positioned in the bottom part of the machine increases the stability of Optical Brinell Hardness Tester. A supporting hydraulic system is given for the initial load and damping for smooth application. Our Optical Brinell Hardness Tester’s accuracy confirms to IS: 2281-2005 & BS: 240.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Mahesh Deshpande¬†
  • 3, Snehdeep, Chintamani Nagar, Sahakar Nagar-2, Pune, Maharashtra - 411009, India
  • Catalog: