All flaps have the same length, and the two outer flaps (normally the lengthwise flaps) are one-half the containers width, so that they meet at the center of the box when folded. If the product requires a flat, even bottom surface, or the protection of two full layers, a fill-in pad can be placed between the two inner flaps. This is a highly efficient design for many applications. There is very little manufacturing waste. The RSC can be used for most products and is the most common box style.

There are a number of derivatives of theRSCthat are in common use in the industry

• Half Slotted Container
• Overlap Slotted Container (OSC)
• Full Overlap Slotted Container (FOL)
• Centre special slotted container

Telescope boxes usually consist of a separate top, or top and bottom that fit over each other or a separate body. The International Fibre-board Case Code calls these boxes Telescope-Style. The truck and rail classifications call them Telescope Boxes if the cover extends over at least two-thirds of the depth, and Boxes with Covers if the cover extends over less than two-thirds of the depth.

Partitions or dividers provide a separate cell for each item in a box. They are used primarily for glassware and other fragile articles. There are an infinite number of partition designs.

A single cut and scored piece features a fifth panel used as the closing flap, completely covering a side panel. The closed box has several layers of combined board on each end, providing stacking strength and protection for long articles of small diameter which might be damaged, or damage the box, if pushed through the ends.

A wrap-around blank is formed into a box by folding it tightly around a rigid product. The positioning of the product, folding and sealing are performed by automatic equipment. The finished box is essentially an RSC, turned on its side so that the bottom and top are unbroken. The joint, however, is not formed until the final closure.

We are into manufacturing and supplying an extensive array ofPaper Corrugated Boardswhich are specially designed and developed for making attractive corrugated boxes.

Keeping in mind your diverse requirements, we offer them in various quality and dimensionsas per your need.

Corrugated Rollscan be used for a variety of purposes like packaging, protecting and storing and they can be customized as per the need. Also their excellent cushioning property provide protection for products against shock and vibration during transportation.

We manufacture corrugated packaging rolls which have been made using a high quality of raw materials and they have been priced at very affordable rates in the market.

Corrugated box is an extremely flexible medium that accommodates a wide range of printing options to fully support the end user requirements. They can be printed by Flexographic, lithographic and silk screen. This is why corrugated packaging is known as an effective sales and marketing medium - the silent salesman.

At GB Pack, we are engaged in manufacturing various types ofPrinted Corrugated Boxes, viz. Single, two colour, tri colour, multicolor duplex printing. These Printed boxes are produced as per your varied specifications and designs.

All flaps have the same length, and the two outer flaps (normally the lengthwise flaps) are one-half the containers width, so that they meet at the center of the box when folded. If the product requires a flat, even bottom surface, or the protection of two full layers, a fill-in pad can be placed between the two inner flaps. This is a highly efficient design for many applications. There is very little manufacturing waste. The RSC can be used for most products and is the most common box style.

There are a number of derivatives of theRSCthat are in common use in the industry

• Half Slotted Container
• Overlap Slotted Container (OSC)
• Full Overlap Slotted Container (FOL)
• Centre special slotted container

Telescope boxes usually consist of a separate top, or top and bottom that fit over each other or a separate body. The International Fibre-board Case Code calls these boxes Telescope-Style. The truck and rail classifications call them Telescope Boxes if the cover extends over at least two-thirds of the depth, and Boxes with Covers if the cover extends over less than two-thirds of the depth.

Partitions or dividers provide a separate cell for each item in a box. They are used primarily for glassware and other fragile articles. There are an infinite number of partition designs.

A single cut and scored piece features a fifth panel used as the closing flap, completely covering a side panel. The closed box has several layers of combined board on each end, providing stacking strength and protection for long articles of small diameter which might be damaged, or damage the box, if pushed through the ends.

A wrap-around blank is formed into a box by folding it tightly around a rigid product. The positioning of the product, folding and sealing are performed by automatic equipment. The finished box is essentially an RSC, turned on its side so that the bottom and top are unbroken. The joint, however, is not formed until the final closure.

We are into manufacturing and supplying an extensive array ofPaper Corrugated Boardswhich are specially designed and developed for making attractive corrugated boxes.

Keeping in mind your diverse requirements, we offer them in various quality and dimensionsas per your need.

Corrugated Rollscan be used for a variety of purposes like packaging, protecting and storing and they can be customized as per the need. Also their excellent cushioning property provide protection for products against shock and vibration during transportation.

We manufacture corrugated packaging rolls which have been made using a high quality of raw materials and they have been priced at very affordable rates in the market.

Corrugated box is an extremely flexible medium that accommodates a wide range of printing options to fully support the end user requirements. They can be printed by Flexographic, lithographic and silk screen. This is why corrugated packaging is known as an effective sales and marketing medium - the silent salesman.

At GB Pack, we are engaged in manufacturing various types ofPrinted Corrugated Boxes, viz. Single, two colour, tri colour, multicolor duplex printing. These Printed boxes are produced as per your varied specifications and designs.