George Philips Medical Engineering Pvt. Ltd.

Kanchpada, Mumbai, Maharashtra

Category : Infusion Therapy Tags alternative to RomoFlo, Dial-a-Flow, Dosiflow, iv flow regulator, iv flow regulator equipment, iv flow regulator extension set, iv flow regulator manufacturer, iv flow regulator suppliers Flow Controller, iv regulator, iv regulator set, Polyflo IV Flow Regulator used to accurately control & regulate the flow of IV fluids. Using for the infusion of liquid substances directly into a vein. Provides reliable accuracy rate across the adjustable rotor to maintain flow stability. Precise flow rate control of IV fluids with a range of 5 to 250 ml/hr.

Needle-free extension lines are used to reduce the risk of bacterial contamination and improve patient outcome. They are designed with straight fluid paths, permitting easy flushing & clearing of blood with low residual & low flush volumes. Can be used with peripheral catheters, arterial & central venous catheters for the administration of IV fluids or medication.

Fine bore extension lines for use with syringe pumps. Co-extruded tubes with inert polyethylene layer for infusion of chemically reactive / sensitive drugs / infusate.

The spinal manometer set consists of a fine bore, clear transparent manometer tube with low priming volume, a rigid calibrated scale (0 to 50 cms). Its fully threaded end adaptors ensure safe & a secure connection with any standard luer spinal needle. The spinal manometer is used for lumbar puncture procedures, when cerebrospinal fluid is extracted for examination, during which time, the pressure of the spinal fluid can be concurrently measured, using the device.

Pressure monitoring lines are rigid, low memory, kink resistant, crystal clear, red or blue colour coded tubings with low priming volumes. The tube is calibrated to precision dimensional tolerances & also we ensure that the durometer of the tube has the synchronous resonance with the pulse wave form for perfect transmission of pressure. This helps in the accurate transmission of the pressure wave, with minimal pressure dampening &/or pressure loss. They are designed to ensure a safe and secure connection, trouble free venting & also permit aseptic handling and priming.

Category : Pressure Monitoring Tags Bentley, Compatible with Medex, Disposable Pressure Transducer Cartridge Domes, For Arterial Pressure Monitoring Kit & Cystometry Pressure Transducers for Urodynamics. IBP Transducer Cartridge Kit, HP, Logical Transducers, Male-Female, Male-Male, MX960X2SC, MX960XX, MX960XY, P23 systems, Philips, Pressure Monitoring System Disposable Pressure Transducer Cartridge & Disposable Pressure Transducer Dome are devices used for monitoring & recording the pressures of the bodys internal fluid systems (blood, urine flow). The usage of the dome prevents blood from contacting the surface of the reusable transducer connected to the patient monitor. Important components of the pressure dome includes the main dome body, the male & female luer connectors & a membrane diaphragm which snugly fits onto the reusable pressure transducer. This diaphragm acts as an interface between saline fluid & the transducer which picks up the pressure wave from the arterial/venous blood, which it subsequently converts to an electrical impulse which is displayed as the systolic/diastolic pressures on the patient monitor.

Category : Pressure Monitoring Tags Disposable IBP Pressure Transducer Kit for Arterial Pressure Monitoring Systems & for Urodynamics. Compatible with Edwards (Truwave), Merit Medical (Meritrans DTXPLUS), Philips, Smiths Medical (TranStar), Utah Medical & other standard pressure monitoring systems A DPT (Disposable Pressure Transducer) is indicated for pressure sensing during clinical invasive procedures without interfering with the patients blood flow and /or blood pressure. The sensor is in fluid communication with different body fluids. By mechanical connection the pressure is transferred to the sensing unit, which translates it to an electrical signal. The stopcock is used for zeroing the pressure monitor before operation. The flush device allows a continuous flow which is required for flushing blood from the monitoring line when connected to the patient assembly. Complete DPT Kit consists of the Following: Disposable Pressure Transducer with inbuilt Flush, Pressure Monitoring Lines, Stopcock, Infusion Set, Dead Ender Caps.

HME filters are passive humidification systems that retain heat and moisture from the patients exhaled gas via a hygroscopic filter. Bacterial Viral Filters help provide effective protection against various types of particles including bacteria, viruses, and moisture droplets. George Philips HME/BVF Filters are precisely engineered and easy to use. Made of high strength plastic material offering reliable performance, these heat and moisture exchange filters are provided with high efficiency electrostatic filters to address concerns associated with ventilated patients. These filters help protect the patient, the equipment, and the breathing circuit from contamination. A conveniently located port or connection permits gas sampling at the top of the housing. Our range of filters are designed based on the ISO standards, to help facilitate connection to different ventilators and anaesthesia systems. These filters are sterile & are suitable for both adult and paediatric patients.

Respiratory/Breathing Circuits are used to connect the patient airways to the ventilator machine. These tubings consist of preassembled corrugated/expandable tubes and connectors & are generally used on patients who are under anaesthesia, respiratory and critical care treatment. George Philips circuit systems deliver exceptional value by providing the configuration that meets your specific needs. Our range of breathing circuits helps to ensure optimal fit and functionality, with several standard circuit configurations and a variety of components in either adult or paediatric sizes, regular or expandable tubing, as well as adult and paediatric circuits, we have a circuit that fits your requirements. And we are committed to the continued expansion of our disposable line to optimize patient safety. You can even create your own custom circuit configuration to incorporate the accessories and components for your specific procedural needs.

A DPT (Disposable Pressure Transducer) is indicated for sensing pressure & flow dynamics during clinical urodynamic investigations in patients with LUTS, BOO, BPH, etc. The sensor is in fluid communication with different body fluids By mechanical connection of the DPT with the urinary catheter, the pressure is transferred to the sensing unit, which translates it to an electrical signal and records urine pressures. This individual urodynamic product consists of the Disposable Pressure Transducer with a 3 way stopcock, in addition to various other standard & customised combination options.