Working process: glass automatic pre-orientation conveying precise orientation printing detection and glass unloading conveying dryer (connective and fully automatic) Special orientation system is very suitable for complex shapes of printing substrates such as the front and rear sector glass of automobiles. And the orientation precision is about ±0.1mm Due to easy scratched features of some printing substrates, we take the special treatment for the working table to prevent the printing substrates from scratching and make the table resistant to abrasion Machine is equipped with PLC working system, friendly touch- on control panel, position adjusting system with high precision display function, error alarming system and photoelectric protection device Adopts worm reduction gear with safety brake motor converter to assure stable up down and left right movement for the main part of the machine Adopts converter to control the printing speed. Both printing speed and oil flooding speed are adjustable Adjustment for screen frame is realized by X and Y axes moving contra position. It’s easy and precise There are two kinds of oil flooding available: one is before printing, the other is together with printing. Both can reduce screen blocking and shading problems

• Voltage380 V / 3 phase / 50 Hz

Series continuous glass bending ovens is used to bend small medium size of glass. Glass runs continuously from entrance till exit at the other end passing through pre-heating, bending, annealing and cooling sections. This oven is also very suitable for glass bake, glass cook, glass decorating and glass fusing.

• Total power:0.25kW (2850r/min)
• Saw blade speed:3,880r/min
• Max. Cutting size:100mm

• featuresSpecial design of the convection fan makes the high temperature capability more reliable and ensures excellent convection effect.
• Glass Size(mm)1220-2500,1500-2500,1500-3000,1700-3000 etc.
• Thickness3-19,4-19,5-25

• Spindles:9 heads.
• Speed:0.3m-3m/min
• Max. bevel width:30mm
• Min. glass size:100mmX100mm

Waterjet Technology(SAME-WATERJET cutting machine, glass waterjet cutter, CNC steel aluminium plate cutting machine, glass waterjet cutting machine, ceramic tile plate waterjet cutter, PVC waterjet cutter, rubber waterjet cutting, sponge paper bumf waterjet cutting machine, stone marble granite waterjet cutter, compute CNC water-jet) technology can pressurize ordinary water to have the pressure of 250-400Mpa, then the water is jetted out at a high speed about 800-1000ms from the gem muzzle with diameter of bore approximately 0.10-0.35mm. This jet has high energy and can be used to cut soft material. If sufficient grinding material is added to the jet, it can cut soft and hard materials. After its jet pressure and flow is adjusted, it can clean various articles, such as degumming, removal of lacquer and rust, etc. UHP technology can also be used for high pressure sterilization, food fresh-keeping, etc.

Working process: glass automatic pre-orientation conveying precise orientation printing detection and glass unloading conveying dryer (connective and fully automatic) Special orientation system is very suitable for complex shapes of printing substrates such as the front and rear sector glass of automobiles. And the orientation precision is about ±0.1mm Due to easy scratched features of some printing substrates, we take the special treatment for the working table to prevent the printing substrates from scratching and make the table resistant to abrasion Machine is equipped with PLC working system, friendly touch- on control panel, position adjusting system with high precision display function, error alarming system and photoelectric protection device Adopts worm reduction gear with safety brake motor converter to assure stable up down and left right movement for the main part of the machine Adopts converter to control the printing speed. Both printing speed and oil flooding speed are adjustable Adjustment for screen frame is realized by X and Y axes moving contra position. It’s easy and precise There are two kinds of oil flooding available: one is before printing, the other is together with printing. Both can reduce screen blocking and shading problems

• featuresInfrared heating, Unforced air circulation system with no fan

Encapsulated blower motor eliminates the high maintenance necessary for through the vessel shaft sealing. Proprietary blower motor design allows operation at any combination of pressure and temperature. Engineered circulating fan assures excellent heat transfer to the load and exceptional temperature uniformity. Proprietary method of placing and securing insulation minimizes heat loss through the pressure vessel and minimizes operating costs. Location of typical electrical heating unit is shielded by cooling coil to prevent radiant heating of load. Cooling coil is a single pass heat exchanger designed for precise temperature control with ample provisions for thermal expansion to minimize thermally induced stresses and failure. “Man-Inside” emergency alarm cables are provided on larger autoclaves which allows operator to completely disable all autoclave sub-systems. It requires autoclave door to be opened to reset the alarm. Load track and floor is designed to allow for thermal expansion yet provide full structural support. ASME approved safety relief valve and rupture disc are provided on separate vessel penetrations to assure independent and safe operation. Many other redundant safeties are incorporated to assure operator and equipment protection. Most vessel penetrations, such as vacuum, thermocouple and cooling are built into removable and replaceable ANSI flanges. This allows easy modification or repairs without compromising the structural integrity of the vessel.

• features- Stainless steel washer with 6 brushes, hard brushes automatically open when Low-E glass input.,Max glass thickness to 19mm

After the glass come in washing machine, it washes and dries in the washing machine. It is composed of brush for cleaning glasses, nozzle and pump for supplying water, air knife for first drying, powerful blower, six washing brush motors, and glass transmission motor.

• Diameter of drilling hole:4-100mm
• Glass thickness:3-30mm
• Total Power:2.2Kw

• FeaturesHigh speed cleaning,Stainless steel air knife, Easy Operation and Maintenance

• Weight500Kg
• Total power2.2KW
• Overall dimension1.5mX1.5mX1.6m