Post Buy Requirement
GT
Delhi, India
Add Review

Other Products / Services

Glass Washing Machines

  • Features High speed cleaning, Stainless steel air knife, Easy Operation and Maintenance
View Complete Details

CNC Water Jet Machine

Waterjet Technology(SAME-WATERJET cutting machine, glass waterjet cutter, CNC steel aluminium plate cutting machine, glass waterjet cutting machine, ceramic tile plate waterjet cutter, PVC waterjet cutter, rubber waterjet cutting, sponge paper bumf waterjet cutting machine, stone marble granite waterjet cutter, compute CNC water-jet)

technology can pressurize ordinary water to have the pressure of 250-400Mpa, then the water is jetted out at a high speed about 800-1000ms from the gem muzzle with diameter of bore approximately 0.10-0.35mm. This jet has high energy and can be used to cut soft material. If sufficient grinding material is added to the jet, it can cut soft and hard materials. After its jet pressure and flow is adjusted, it can clean various articles, such as degumming, removal of lacquer and rust, etc. UHP technology can also be used for high pressure sterilization, food fresh-keeping, etc.
View Complete Details

Automatic Glass Insulation Production Line

  • Max. Size: 2500x3200mm
  • Min. Size 200x450mm
  • Control Touch Screen
  • Air pressure 6kgf/cm2
Auto I.G. line is fully controlled by PLC system, easy operation
Touch screen shows the auto I.G. line working and possible trouble
Stainless steel washing machine prevents corrosion and guarantees semi-permanent life Tempered glass door show inside working clearly. Stainless steel brush cover.
Automatically detection Low-E glass and coated glass
Input conveyor, output conveyor, pre-assembly conveyor, assembly conveyor, press box, tilting table are all made of steel
Heating system for the water. No heating system for the blowing air to save energy.
Energy saving system for the washing machine
Special design for the online and off-line Low-E glass
Clear water sprinkling system in washing machine
Special designed plate press box.
Electrical parts are famous brand, United States , Japan, Germany. The electrical parts are the most important in the whole auto IG line, acceleration is high
6 sensors in assembly conveyor, ensure the assembly precision for IG unit.
Three-layer insulating glass is available
View Complete Details

Automatic Glass Drilling Machine

  • Diameter of drilling hole: 4-100mm
  • Glass thickness: 3-30mm
  • Total Power: 2.2Kw
This machine adopt PLC controller and oil buff technology. The centering of drill hole can be positioned by means of mechanical method or laser. Pneumatic clamper grip glass with adjustable pressure. The machine has two working status: semiautomatic & automatic. In semiautomatic mode, the machine only work one time when pedaling the start button. In automatic mode, the machine works continuously. The machine is featured by its high working efficiency, low glass damage and easy operation.
View Complete Details

Serial Glass Bending Machine

  • Voltage 380 V / 3 phase / 50 Hz
Series continuous glass bending ovens is used to bend small medium size of glass. Glass runs continuously from entrance till exit at the other end passing through pre-heating, bending, annealing and cooling sections. This oven is also very suitable for glass bake, glass cook, glass decorating and glass fusing.
View Complete Details

Clear Glass Washing Machine

  • features - Stainless steel washer with 6 brushes, hard brushes automatically open when Low-E glass input., Max glass thickness to 19mm
After the glass come in washing machine, it washes and dries in the washing machine. It is composed of brush for cleaning glasses, nozzle and pump for supplying water, air knife for first drying, powerful blower, six washing brush motors, and glass transmission motor.
View Complete Details

Encapsulated Blower Motor

  • features Infrared heating, Unforced air circulation system with no fan
Encapsulated blower motor eliminates the high maintenance necessary for through the vessel shaft sealing.
Proprietary blower motor design allows operation at any combination of pressure and temperature.
Engineered circulating fan assures excellent heat transfer to the load and exceptional temperature uniformity.
Proprietary method of placing and securing insulation minimizes heat loss through the pressure vessel and minimizes operating costs.
Location of typical electrical heating unit is shielded by cooling coil to prevent radiant heating of load.
Cooling coil is a single pass heat exchanger designed for precise temperature control with ample provisions for thermal expansion to minimize thermally induced stresses and failure.
Man-Inside emergency alarm cables are provided on larger autoclaves which allows operator to completely disable all autoclave sub-systems. It requires autoclave door to be opened to reset the alarm.
Load track and floor is designed to allow for thermal expansion yet provide full structural support.
ASME approved safety relief valve and rupture disc are provided on separate vessel penetrations to assure independent and safe operation. Many other redundant safeties are incorporated to assure operator and equipment protection.
Most vessel penetrations, such as vacuum, thermocouple and cooling are built into removable and replaceable ANSI flanges. This allows easy modification or repairs without compromising the structural integrity of the vessel.
View Complete Details

Pre Heating Vacuum Conveyor Oven

  • Models LGVH-B-V-1015, LGVH-B-V-1220, LGVH-B-V-1525
  • Max. Glass Size 1000 x 1500 mm, 1200 x 2000 mm, 1500 x 2500 mm
  • Max. Temperature 140℃
PLC Conveyor Design Heating & Vacuum Oven for Mass Production
Hot Air Convection Heating
Glass Travels Vertically
Consists of Oven Body, Conveyor, Vacuum System, Heating System & Control System
Stable Chain Conveyor Carries Glass Consistently
Vertical Rods Attached to Conveyor
Frequency Converter Infinitely Regulate Glass Travel Speed
Well Assembled Laminated Glass with PVB Films Loaded on Conveyor Separated by Vertical Rods
Hoses of Silicon Rubber Rings Connected to Vacuum Pipes Inside Oven
Vacuuming Evacuates Air Trapped Between Two Pieces of Glass by Means of Silicon Rings
Air Fan Creates Powerful Hot Air Convection to Uniformly Preheat Glass & PVB Films
Glass Edges Well Sealed with Pre-Melting & Pre-Bonding between Glass & PVB Film
Well Thermal Insulation Materials of Oven Body Minimizes Heat Loss
Automatic Heating Control
View Complete Details

Fan Force Convection Furnace

  • features Special design of the convection fan makes the high temperature capability more reliable and ensures excellent convection effect.
  • Glass Size(mm) 1220-2500, 1500-2500, 1500-3000, 1700-3000 etc.
  • Thickness 3-19, 4-19, 5-25
According to the convection heating theory, we adopt Force Convection Furnace special designed convection fan and thermal circulation structure, besides, we apply some other advanced technology, all of which roll into one that speeds the glass heating and improves production efficiency and products quality. The advantage is more distinct when processing Low-E glass. All MT series tempering furnace can adopt this force convection system.
View Complete Details

Aluminum Spacing Bar Cutting Machine ASBC

  • Total power: 0.25kW (2850r/min)
  • Saw blade speed: 3, 880r/min
  • Max. Cutting size: 100mm
Aluminium spacing strips cutting machine is the specialized equipment in cutting aluminum spacing strips.
. Put the aluminum spacing strips on the working table and move the locating piece to the desired length
(within 2400mm). When the cylinder is compressed, the saw can finish the cutting process automatically.
This type of machine is adapted to cutting of aluminum spacing strips with 618mm W x 6mm H in size.
View Complete Details

Sand Belt Grinding Machine

SMB2100 is used for fine grinding and beveling of glass after cutting. Equipped with dust collecting device, it is a real bargain for your glass processing.
View Complete Details

Fully Automatic Glass Screen Printing Machine

Working process: glass automatic pre-orientation conveying precise orientation printing detection and glass unloading conveying dryer (connective and fully automatic)
Special orientation system is very suitable for complex shapes of printing substrates such as the front and rear sector glass of automobiles. And the orientation precision is about 0.1mm
Due to easy scratched features of some printing substrates, we take the special treatment for the working table to prevent the printing substrates from scratching and make the table resistant to abrasion
Machine is equipped with PLC working system, friendly touch- on control panel, position adjusting system with high precision display function, error alarming system and photoelectric protection device
Adopts worm reduction gear with safety brake motor converter to assure stable up down and left right movement for the main part of the machine
Adopts converter to control the printing speed. Both printing speed and oil flooding speed are adjustable
Adjustment for screen frame is realized by X and Y axes moving contra position. Its easy and precise
There are two kinds of oil flooding available: one is before printing, the other is together with printing. Both can reduce screen blocking and shading problems
View Complete Details

Two-Component Coating Machine

  • Air pressure : 0.5-0 .8 Mpa
  • Maximum fluid pressure: 30Mpa
  • Working Pressure: 20.0Mpa
The system is pure air, no electricity, no hydraulic, easy to adjust, simple and safe operation.
The system adopts the most advanced technology and production processes, the ratio of precision ( 2%), mix well.
Key components (the main motor, Vice motors, glue guns, safety valves, etc.) using imported products to ensure reliable operation.
Optional electric heat insulation device in order to adapt to temperature changes.
Adaptation Glue: silicone rubber, polysulfide rubber, polyurethane rubber, most of the two-component adhesive.
Applicable industries: insulating glass, glass curtain wall and other related products
View Complete Details

Profile Grinding Machine

  • Weight 500Kg
  • Total power 2.2KW
  • Overall dimension 1.5mX1.5mX1.6m
The machine is suitable for grinding and polishing exterior edge of shaped glass. By changing grinding wheel of different shape, flat edge with arris, pencil edge, bevel edge and OG edge can be processed. The height of spindle can be adjusted easily. The pneumatic cylinder makes it possible that round and simple shape glass can be processed automatically.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sanjeev Bhardwaj (Glass Tools & Abrasives)
  • M-3/D-10, Jhulelal Apartment, Pitampura, Delhi - 110034, India
  • Share us via