Rolling Machine #858986

Z Purlin Roll Forming Machine

The Z Purlin Roll Forming Machine has a sturdy construction. Comprising of high quality components, the Z Purlin Roll Forming Machine is designed to deliver optimum efficiency. The Z Purlin Roll Forming Machine has a long service life. It is quality tested to ensure that the Z Purlin Roll Forming Machine complies with the industry standards.

Z Purlin Roll Forming Machine Comprises Of :

A decoiler
Leveling device
Punching system
Roll forming system
Post-cutting equipment
Hydraulic station
Electric controlling system
Run out table for product

Applications :

The product of the Z Purlin Roll Forming Machine is used as the supporter of roofs and walls in large-scale and mid-scale construction, such as factories, warehouses, garages, exhibition centers, cinemas, theatres, gardens, and so on.

Technical Specifications

Suitable Material	Cold-rolled steel strip and heat-treated galvanized steel strip
Material of roller	HCHCr Hardened & Tempered , Hardness 58-60 HRC
Material of cutter blade and punching die	Cr12 mold steel with quenched treatment, HRC58-60
Material of shaft	High quality En-31/En-24 steel with heat treatment perfectly Ground & Milling
Forming speed	About 12-15m/min
Power Requirement	Main motor power : 15 Kw (Depend on final design) Hydraulic station power : 5.5Kw (Depend on final design)
Diameter of shaft for rollers	75mm
Controlling system	Mitsubishi PLC & converter
Quantity of rollers	About 15 stations for main rollers
Weight of machine	About 10000KGS
Size of machine installation	About 19 m x 2.3 m x1.5m

Suitable Material	Q235 color steel sheet;0.3-0.7mm, 1000 and 1250mm coil width
Forming speed	About 20m/min
Power requirement	Main motor power : 5.5 Kw (Depend on final design) Hydraulic station power : 2.2Kw (Depend on final design)
Material of forming rollers	EN-31 steel, plated with chrome on surface, HRC 58-60
Material of cutter	Cr12 mold steel with quench treatment, HRC58-60
Material of shaft	High quality 45# steel with heat treatment Roller grinder milling
Shaft diameter	72mm
Controlling system	Mitsubishi PLC & converter
Total weight of machine	About 8500KGS
Machine's size	About 15m x 1.8m x 1.5m (Depend on final design)
Shipping	1x40GP container can load one machine

Suitable material	Q235 color steel sheet; 0.3-0.7mm
Forming speed	About 20m/min
Power requirement	Main motor power : 5.5 Kw (Depend on final design) Hydraulic station power : 2.2Kw (Depend on final design)
Material of forming rollers	EN-31 steel, plated with chrome on surface, HRC 58-60
Material of cutter	Cr12 mold steel with quench treatment, HRC58-60
Material of shaft	High quality 45# steel with heat treatment Roller grinder milling
Shaft diameter	72mm
Controlling system	Mitsubishi PLC & converter
Total weight of machine	About 7000KGS
Machine's size	About 15m x 1.8m x 1.5m (Depend on final design)

Suitable Raw Material	Q235A galvanized steel sheet Thickness : 2-3.0mm
Forming Speed	About 8-10m/min.
Material of Forming Rollers	HCHCr Hardened & Tempered , Hardness 58-60 HRC
Material of Cutter, Punching Die	Cr12 mold steel with quench treatment, HRC58-60
Material of Shaft	High quality 45# steel with heat treatment Roller grinder milling
Transmission	Gear box
Total Motor Power	About 35Kw (Depend on final design)
Control system	Mitsubishi PLC & converter

Suitable material	Cold-rolled steel strip and heat-treated galvanized steel strip
Thickness of raw material	1.0-3.0mm (235-345Mpa)
Size of OMEGA	50-130mm adjustable (special size available)
Material of roller	HCHCr steel being quenched treatment, HRC58-60
Material of cutter blade and punching die	Cr12 mold steel with quenched treatment, HRC58-60
Material of shaft	High quality 45# steel with heat treatment Roller grinder milling
Forming speed	About 10-12m/min
Power requirement	Main motor power : 15 Kw (Depend on final design) Hydraulic station power : 5.5Kw (Depend on final design)
Diameter of shaft for rollers	82mm
Controlling system	Mitsubishi PLC & converter
Quantity of rollers	About 22stations for main rollers
Weight of machine	About 10000KGS
Size of machine installation	About 20mX2.5mx1.7m

Suitable Material	Galvanized steel strip
Thickness of raw material	0.4-0.8mm (235-345Mpa)
Material of roller	EN-31 steel, plated with chrome on surface, HRC 58-60
Material of cutter blade	Cr12 mold steel with quenched treatment, HRC58-60
Material of shaft	High quality 45# steel with heat treatment Roller grinder milling
Forming speed	About 20m/min
Power requirement	Main motor power : 4Kw (Depend on final design) Hydraulic station power : 2.2Kw (Depend on final design)
Diameter of shaft for rollers	55mm
Controlling system	Mitsubishi PLC & converter
Quantity of rollers	About 15 stations for main rollers
Weight of machine	About 3500KGS
Size of machine installation	About 12mx 1.7 mx1.5m

Suitable Material	Q235 color steel sheet Thickness : 0.7-1.2mm
Forming Speed	About 15m/min
Power Requirement	Main Motor Power : 18.5 Kw (Depend on final design) Hydraulic Station Power : 5.5Kw (Depend on final design)
Material of Forming Rollers	No. 45 steel, plated with chrome on surface
Material of cutter	Cr12 mold steel with quench treatment, HRC58-60
Material of shaft	High quality 45# steel with heat treatment Roller grinder milling
Shaft diameter	82mm
Controlling system	Mitsubishi PLC & converter
Total weight of machine	About 16500KGS
Machine's size	About 26m x 1.8m x 1.5m (Depend on final design)
Shipping	1x40GP and 1X20GP containers can load one machine

Rolling Machine #858986

Z Purlin Roll Forming Machine

Trapezoidal Sheet Roll Forming Machine

Corrugated Sheet Roll Forming Machine

Guardrail Roll Forming Machine

Sigma Purlin Roll Forming Machine

C Purlin Roll Forming Machine

Shutter Door Roll Forming Machine

Metal Deck Roll Forming Machine

Contact Us

Rolling Machine #858986

Z Purlin Roll Forming Machine

Trapezoidal Sheet Roll Forming Machine

Corrugated Sheet Roll Forming Machine

Guardrail Roll Forming Machine

Sigma Purlin Roll Forming Machine

C Purlin Roll Forming Machine

Shutter Door Roll Forming Machine

Metal Deck Roll Forming Machine

Contact Us