Post Buy Requirement

GNA Exports

GNA Exports

Bangalore, Karnataka, India

Add Review

Our Products

Cement Concrete Testing Equipm #2497207

Hand Operated Flow Table

We are offering flow table is:6932 - hand operated - (ft-01).

this is used for determining the workability of building limes.

salient features
specifications : the flow table consists of a 30cm. Dia ground and polished steel plate with three inscribed annular circles. 7, 11 and 19cm. Dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm i.d. At base and 40mm i.d. At top, height of the mould 90mm.

View Complete Details

Ask Latest Price & Details

Concrete Permeability Apparatus

Concrete Permeability Apparatus

We offer concrete permeability apparatus - single cell - (cpa-01).

One of the durability tests of concrete is to determine permeability of water through specimen. Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratory.

salient features
specification: the concrete permeability apparatus comprises of a brass gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and t-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate, one metal funnel and one top plate, and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure air line or by a compressor.
Available for sample of size 150mm dia x 150mm high.
Available for sample of size 100mm dia x 100mm high.

View Complete Details

Ask Latest Price & Details

Curing Tank

Curing Tank

We are offering curing tank - (ct-01)
- 24 hour cycle from time of mixing. - controlled 35oc or 100oc 2oc curing temperature for concrete. - controlled 27oc 2oc curing temperature for grey cement. The tank has been designed to accommodate 150mm70.6mm cube moulds upto 3672 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oc or 100oc 2oc 27oc +2oc , expect for the 15 minutes after immersion of the freshly made specimens.

Salient features
curing tank for 612 moulds of 150mm 70.6mm size
curing tank for 1224 moulds of 150mm 70.6mm size

View Complete Details

Ask Latest Price & Details

Compression Testing Machine

Compression Testing Machine

We are offering compression testing machine.
Compression testing machine - (ctm-01)
principal of operation: operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydro-statically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamo-meter system housed in the control panel. The cylinder of the dynamo-meter is also of self-lubricating design. The piston of the dynamo-meter is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamo-meter is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. Application : fie compression testing machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Salient features
features :the fie compression testing machine incorporates design features to enable high accuracy testing with economy, speed & versatility.
Loading accuracy as high as + 1%
straining at variable speeds to suit a wide range of materials.
Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.
high reading accuracy due to large size and design of dial.
Wide range of standard and special accessories, including load stabilizer.
Large effective clearance between columns enables testing of standards specimens as well as structures.

View Complete Details

Ask Latest Price & Details

Gauging Trowel

Gauging Trowel

We are offering Gauging Trowel.
Gauging Trowel - (GT-01)
Specifications : weight approximately 210gm. Best quality with hardwood handle blade length approx. 200mm.

View Complete Details

Ask Latest Price & Details

Capping Set

Capping Set

We are offering capping set.
We are a reliable exporter, supplier and manufacturer of capping set. Our prominent company offer the product at most economical prices, as we better understand the demands of the reputed clients. Additionally the product is extensively used in laboratories, etc. Apart from this, some of the features of the capping set are as follows:
exquisite design
optimum durability
excellent finish
absolute defect free
corrosion resistant
trouble free performance
superlative ductility

View Complete Details

Ask Latest Price & Details

Cube Moulds

Cube Moulds

We are offering cube moulds - (cm-01).
Specifications : these are available in different sizes and are made according to indian and british standards. For the metric size cube moulds, the faces are machined flat to +-0.02mm accuracy and finished to within 0.02mm. For the inch size moulds, the faces are machined flat to +-0.01 inches and finished to within 0.01 in. All moulds are supplied complete with base plate.

Mould cast iron, for 50mm, cube
mould gunmetal, for 50mm, cube
mould steel for 7.06cms cube with loose base plate.
Mould cast iron for 7.06cms cube with loose base plate.
Mould cast iron, for 10cm cube 153 with "isi" mark.
Mould cast iron, for 20cm cube
mould cast iron, for 30cm cube

View Complete Details

Ask Latest Price & Details

Cone Penetrometer

Cone Penetrometer

We are offering cone penetrometer - (mpc-02)

for determining the consistency of masonary mortar.

salient features
specifications: consists of a movable bearing rod to which a cone 145mm. Long and 75mm. Dia at a base is fixed. The bearing rod passes freely through a bracket which is provided with release mechanism. A dial graduated in mm with rack and pinion is provided for measuring th

View Complete Details

Ask Latest Price & Details

Concrete Test Hammer

Concrete Test Hammer

We are offering concrete test hammer.
Concrete test hammer - (cth-01)
the concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in mpa or psi can be found, with +-20% of actual.

Salient features
specifications : consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kgcm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

View Complete Details

Ask Latest Price & Details

Flexure Testing Machine

Flexure Testing Machine

We offer flexure testing machine (motorized) rilem - cembureau test - (ftm-01).
It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (rilem cembureau test) by single point loading.

Salient features
specifications : it is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kgsec. A flexure test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. Diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the opposite face of the prism. The unit is for operation on 230 volts, single phase, 50 cycles a.c.supply. Loads are measured on a proving ring fitted with a sensitive dial gauge. Supplied without proving ring.

Accessories: proving ring, capacity 500 kn.

View Complete Details

Ask Latest Price & Details

Mortar Mixer

Mortar Mixer

We are offering mortar mixer - (mm-01).

it is used for mixing cement pastes, mortars and pozzolanas.

salient features
specifications : the apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion, by means of gears. It has two speeds of 140 + 5 r.p.m. And 285 + 10 r.p.m. With planetary motions of approximately 62 r.p.m. + 5 r.p.m. And 125 r.p.m.+-10 r.p.m. Respectively. The stand of the mixer has arrangement to raise or lower the bowl. Complete with stainless steel bowl of about six litres capacity. Suitable for operation on 230 volts, 50 cycles, single phase, a.c.supply.

View Complete Details

Ask Latest Price & Details

Laboratory Concrete Mixer

Laboratory Concrete Mixer

We are offering laboratory concrete mixer (motorized) - (lcm-01).
Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1. 12 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with h.p. Electric motor. Suitable for operation on 220230 volts a.c. Single phase.

View Complete Details

Ask Latest Price & Details

Needle Apparatus

Needle Apparatus

We offer gillmore needle apparatus - gna-01).
This instrument is used for determining the time setting of hydraulic cement.

Salient features
specifications : a base with a vertical shaft and two horizontal arms. The lower arm is adjustable for height. 1 no. Initial needle 112 inch dia 14 lb.wt. 1no. Final needle 112 inch dia. 1lb.wt. 1no. Glass base plate. Complete as above.

View Complete Details

Ask Latest Price & Details

Blaines Air Permeability Apparatus

Blaines Air Permeability Apparatus

We are offering blaines air permeability apparatus:
in order to determine the fineness of cement in terms of specific surface expressed, our blaines air permeability apparatus is extensively utilized. It is consists one each of permeability cell 12.5mm i.d. And rubber tube 30cm long. Apart from this the blaines air permeability apparatus is hugely demanded and appreciated among the valued users for its high performance, excellent output, low energy consumption, ergonomic designs, low maintenance cost, longer functional life, simple operation, rugged construction, and many more.

Specifications :

manometer 'u' type mounted on stand with a built in stop cock, perforated disc, plunger rubber stopper. Packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid.
Spares and accessories: punch to cut filter paper discs. Non-perforated disc. Suction bulb.

View Complete Details

Ask Latest Price & Details

Length Comparator

Length Comparator

We are offering length comparator - (lc-01)

it is used to measure the drying shrinkage of concrete autoclave expansion of port land cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying.

salient features
specifications : the instrument consists of a channelled base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to 0.002mm x 12mm. Can be fixed to the top cross plate. The plunger end of the dial gauge can be located upon a 6.5mm. Dia ball or other reference point cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. Balls mounted in the ends.
The unit can be supplied with a 0.0001 inch x 12 inch dial gauge at extra cost

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Amit Priyadarshi (GNA Exports)
# 94/3, 2nd Floor, Katriguppe, Bsk 3rd Stage,Bangalore - 560085, Karnataka - India, Banashankari
Share us via

View Contact No.

Retailer of Cement Concrete Testing Equipm from Bangalore, Karnataka by GNA Exports

Post Buy Requirement

GNA Exports

GNA Exports

Bangalore, Karnataka, India

Add Review

Our Products

Cement Concrete Testing Equipm #2497207

Hand Operated Flow Table

We are offering flow table is:6932 - hand operated - (ft-01). this is used for determining the workability of building limes. salient featuresspecifications : the flow table consists of a 30cm. Dia ground and polished steel plate with three inscribed annular circles. 7, 11 and 19cm. Dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm i.d. At base and 40mm i.d. At top, height of the mould 90mm.

View Complete Details

Ask Latest Price & Details

Concrete Permeability Apparatus

Concrete Permeability Apparatus

We offer concrete permeability apparatus - single cell - (cpa-01). One of the durability tests of concrete is to determine permeability of water through specimen. Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratory. salient featuresspecification: the concrete permeability apparatus comprises of a brass gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and t-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate, one metal funnel and one top plate, and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure air line or by a compressor.Available for sample of size 150mm dia x 150mm high.Available for sample of size 100mm dia x 100mm high.

View Complete Details

Ask Latest Price & Details

Curing Tank

Curing Tank

We are offering curing tank - (ct-01)- 24 hour cycle from time of mixing. - controlled 35oc or 100oc 2oc curing temperature for concrete. - controlled 27oc 2oc curing temperature for grey cement. The tank has been designed to accommodate 150mm70.6mm cube moulds upto 3672 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oc or 100oc 2oc 27oc +2oc , expect for the 15 minutes after immersion of the freshly made specimens. Salient featurescuring tank for 612 moulds of 150mm 70.6mm sizecuring tank for 1224 moulds of 150mm 70.6mm size

View Complete Details

Ask Latest Price & Details

Compression Testing Machine

Compression Testing Machine

We are offering compression testing machine.Compression testing machine - (ctm-01)principal of operation: operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydro-statically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamo-meter system housed in the control panel. The cylinder of the dynamo-meter is also of self-lubricating design. The piston of the dynamo-meter is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamo-meter is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. Application : fie compression testing machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted. Salient featuresfeatures :the fie compression testing machine incorporates design features to enable high accuracy testing with economy, speed & versatility. Loading accuracy as high as + 1%straining at variable speeds to suit a wide range of materials.Continuous roll autographic recorder supplied as standard to enable study of the behavior of materialsmotor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.high reading accuracy due to large size and design of dial.Wide range of standard and special accessories, including load stabilizer.Large effective clearance between columns enables testing of standards specimens as well as structures.

View Complete Details

Ask Latest Price & Details

Gauging Trowel

Gauging Trowel

We are offering Gauging Trowel.Gauging Trowel - (GT-01)Specifications : weight approximately 210gm. Best quality with hardwood handle blade length approx. 200mm.

View Complete Details

Ask Latest Price & Details

Capping Set

Capping Set

We are offering capping set.We are a reliable exporter, supplier and manufacturer of capping set. Our prominent company offer the product at most economical prices, as we better understand the demands of the reputed clients. Additionally the product is extensively used in laboratories, etc. Apart from this, some of the features of the capping set are as follows:exquisite designoptimum durabilityexcellent finishabsolute defect freecorrosion resistanttrouble free performancesuperlative ductility

View Complete Details

Ask Latest Price & Details

Cube Moulds

Cube Moulds

We are offering cube moulds - (cm-01).Specifications : these are available in different sizes and are made according to indian and british standards. For the metric size cube moulds, the faces are machined flat to +-0.02mm accuracy and finished to within 0.02mm. For the inch size moulds, the faces are machined flat to +-0.01 inches and finished to within 0.01 in. All moulds are supplied complete with base plate. Mould cast iron, for 50mm, cubemould gunmetal, for 50mm, cube mould steel for 7.06cms cube with loose base plate.Mould cast iron for 7.06cms cube with loose base plate.Mould cast iron, for 10cm cube 153 with "isi" mark.Mould cast iron, for 20cm cubemould cast iron, for 30cm cube

View Complete Details

Ask Latest Price & Details

Cone Penetrometer

Cone Penetrometer

We are offering cone penetrometer - (mpc-02) for determining the consistency of masonary mortar. salient featuresspecifications: consists of a movable bearing rod to which a cone 145mm. Long and 75mm. Dia at a base is fixed. The bearing rod passes freely through a bracket which is provided with release mechanism. A dial graduated in mm with rack and pinion is provided for measuring th

View Complete Details

Ask Latest Price & Details

Concrete Test Hammer

Concrete Test Hammer

We are offering concrete test hammer.Concrete test hammer - (cth-01)the concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in mpa or psi can be found, with +-20% of actual. Salient featuresspecifications : consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kgcm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

View Complete Details

Ask Latest Price & Details

Flexure Testing Machine

Flexure Testing Machine

We offer flexure testing machine (motorized) rilem - cembureau test - (ftm-01).It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (rilem cembureau test) by single point loading. Salient featuresspecifications : it is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kgsec. A flexure test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. Diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the opposite face of the prism. The unit is for operation on 230 volts, single phase, 50 cycles a.c.supply. Loads are measured on a proving ring fitted with a sensitive dial gauge. Supplied without proving ring. Accessories: proving ring, capacity 500 kn.

View Complete Details

Ask Latest Price & Details

Mortar Mixer

Mortar Mixer

We are offering mortar mixer - (mm-01). it is used for mixing cement pastes, mortars and pozzolanas. salient featuresspecifications : the apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion, by means of gears. It has two speeds of 140 + 5 r.p.m. And 285 + 10 r.p.m. With planetary motions of approximately 62 r.p.m. + 5 r.p.m. And 125 r.p.m.+-10 r.p.m. Respectively. The stand of the mixer has arrangement to raise or lower the bowl. Complete with stainless steel bowl of about six litres capacity. Suitable for operation on 230 volts, 50 cycles, single phase, a.c.supply.

View Complete Details

Ask Latest Price & Details

Laboratory Concrete Mixer

Laboratory Concrete Mixer

We are offering laboratory concrete mixer (motorized) - (lcm-01). Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1. 12 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with h.p. Electric motor. Suitable for operation on 220230 volts a.c. Single phase.

View Complete Details

Ask Latest Price & Details

Needle Apparatus

Needle Apparatus

We offer gillmore needle apparatus - gna-01).This instrument is used for determining the time setting of hydraulic cement. Salient featuresspecifications : a base with a vertical shaft and two horizontal arms. The lower arm is adjustable for height. 1 no. Initial needle 112 inch dia 14 lb.wt. 1no. Final needle 112 inch dia. 1lb.wt. 1no. Glass base plate. Complete as above.

View Complete Details

Ask Latest Price & Details

Blaines Air Permeability Apparatus

Blaines Air Permeability Apparatus

We are offering blaines air permeability apparatus:in order to determine the fineness of cement in terms of specific surface expressed, our blaines air permeability apparatus is extensively utilized. It is consists one each of permeability cell 12.5mm i.d. And rubber tube 30cm long. Apart from this the blaines air permeability apparatus is hugely demanded and appreciated among the valued users for its high performance, excellent output, low energy consumption, ergonomic designs, low maintenance cost, longer functional life, simple operation, rugged construction, and many more. Specifications : manometer 'u' type mounted on stand with a built in stop cock, perforated disc, plunger rubber stopper. Packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid.Spares and accessories: punch to cut filter paper discs. Non-perforated disc. Suction bulb.

View Complete Details

Ask Latest Price & Details

Length Comparator

Length Comparator

We are offering length comparator - (lc-01) it is used to measure the drying shrinkage of concrete autoclave expansion of port land cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying. salient featuresspecifications : the instrument consists of a channelled base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to 0.002mm x 12mm. Can be fixed to the top cross plate. The plunger end of the dial gauge can be located upon a 6.5mm. Dia ball or other reference point cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. Balls mounted in the ends.The unit can be supplied with a 0.0001 inch x 12 inch dial gauge at extra cost

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Amit Priyadarshi (GNA Exports)
# 94/3, 2nd Floor, Katriguppe, Bsk 3rd Stage,Bangalore - 560085, Karnataka - India, Banashankari
Share us via

View Contact No.