Other Products / Services #366864

Sturdy construction, excellent performance, high grade, and low prices have attracted so many buyers from all over the nation and overseas. We are a reputed Manufacturer, Exporter and Supplier of Wheat Cleaning Plant in India. The Wheat Cleaning Plant, which we bring to you is impeccable on terms of superiority and performance. As far as the price is talked about, we make sure that the Wheat Cleaning Plant is obtainable at the cost-effective prices.

The Vibro Sifter Machine Works On The Principle Of Gyratory Vibrations. The Material Is Separated On The Basis Of Their Particle Size. Once The Motor Gets Energized, Vibration Is Caused In The Screen/Sieve Making The Material To Travel Across The Sieves According To Its Particle Size. Vibrating Process Is Maintained By Means Of Vibro-Motors, Which Are Placed In The Center Of Gravity Of The Machine.

Pin Mill Work By Similar Principle As Hammer Mills (Impacts And Shearing) But With Typically Faster Tip Speed Rotor Configuration Of Intermeshing Pins Which Impact The Particles As Solids AND MAYERIAL IS TRANSORMED INTO POWDER FORM AND Cooling Of The Rotating Disks Is A Useful Way Of Removing Heat From The Mill.

The Pulverizer Is A Machine Added By Thermal Expansion. It Smashes Blocks And Items And Pulverizes. It Is The Process Of Crushing Solid Material Into A Fine Particles Of Less Than 5 Mm. Pulverization Method Includes; Crushing, Impacting And Grinding. A Pulverizer Or Grinder Is A Mechanical Device For The Grinding Of Many Different Types Of Materials.

Hopper Magnet – For Excellent Protection Against Iron Contamination. Hooper Magnet Is Used To Remove The Particles Of Metal From The Raw Material. It Is Used To Protect Fine Powder Before Packing From Iron Contamination From Nails, Nuts, And Iron Bits And Iron Dust.

Product Details :

• Plate Magnets Are Designed For Use In Machine Feeding Inlet . Can Be Installed On The Bottom Side Of A Chute Or At The Starting Point Of Any Machine.
• A Plate Magnet Will Provide Maximum Protection As Product Travels Through The Powerful Magnetic Circuit. . This PLATE Is Used To Seal The Iron Contamination In Any Form To Prevent Damage.

Cryogenic Grinding Involves Cooling A Material Below Its Embrittlement Temperature With A Cryogenic Fluid, Typically Liquid Nitrogen. After Cooling, The Material Is Fed Into An Impact Mill Where It Is Reduced In Size Primarily By Twisting Force of Pins.

Due To Centrifugal Force, The Product Is Thrown Towards The Screen Whose Size Is Selected Beforehand. During The Screening Process, Flour Passes Through The Screen And Larger Sizes Of Bran Are Directed To The Discharge Outlet. Its Quality is Beyond Comparison.

This Advanced Magnetic Destoner Is Utilized To Remove Sand Particles, Fragmented Stones, Mud Balls And Various Other Contaminants Or Impurities Present In All Sorts Of Grains, Seeds Etc.

From The Air Lock Inlet The Air-Product Mixture Enters The Chambers, Which Are Created By Fixing Blades (Wings) On The Rotor Shaft. Due To The Precise And Standard Tolerance Between The Body Housing And The Rotor, The Product Is Separated From Air And Discharged Regularly Without Any Leakage.

Self Cleaning Machinery, Temperature Set Grinding, Rpm Control Grinding, Dry Chilled Grinding

Latest Pattern Of Grinding Ever Introduced In Indian History. It Works On The Following Points -

• Speed Can Be Controlled Of Grinding
• Temperature Can Be Control Of Grinding
• Aroma And Color Can Be Save While Grinding
• Different Speed For Different Products
• Admin Access Grinding
• Auto Showing Fault
• Automatic Cut-Off On High Temperature Of Motor Etc.
• Dry Chilled Air Grinding

All These Points Without Disturbing Your Production And Enhancing Your Quality.

The Double Cone Blender Is Used To Produce Homogeneous Solid-Solid Mixture. This Process Is 360 Degree Rotation Process For Industries Such As Healthcare, Food, Chemical, Cosmetics, Detergents, Fertilizers And Plastics.

Product Details :

• This System Is Used For Lifting Material From The Bottom And Feeding Any Machine Or Shifting Material To Another Floor Or Loading Trucks.
• It’s Speed Can Be Controlled According To The Product.
• Different Length And Size Can Be Create As Per Customer Need.

We are a top-notch Manufacturer, Exporter and Supplier of Biodiesel Unit in India. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and the latest techniques for its production. The Biodiesel Unit is designed and developed in adherence with the stated international quality standards. Our Biodiesel Unit is offered in different capacities at the most discounted prices. Rely on us and place the order!

IS Available With Us In Different Operating Specifications To Choose From And Provides Working As A Heavy Duty Blender. The Equipment Finds The Use For Allowing Easy Mixing Of Pre-Processed Powder Like Dried Granules, Pre-Sieved Powders, And Others.

Product Details :

• This System Is Used Under The Silo’s For Moving The Stichy Matrial From The Silo’s Without Changing The Form Of Product.
• Power Consumption Is = To No.

ROTARY DRYER Rotary Dryers Work By Tumbling Material In A Rotating Drum In The Presence Of A Drying Air. They Can Also Be Indirectly Heated To Avoid Direct Contact Between The Material And Processing Medium. The Drum Is Positioned At A Slight Horizontal Slope To Allow Gravity To Assist In Moving Material Through The Drum.

The Tunnel Dryer Is A Machine Where A Container (Tray) Filled With The Material Is Placed On The Chain Or The Material Is Loaded Directly On The Chain, And The Trolley Is Pushed In From The Tunnel Chamber Entrance. The Material Is Dried While Being Moved Through The Drying Chamber.

Product Details:

• This Setup Is Used ForChecking  The Weight Of Your Mixture / Blender / Silos At Any Place.
• Making A Bigger Lot While Mixing Different Products With Lesser Quantity.

The Distinctive Principle Of Air Classifier Grinder Is Based On A High Air Throughput In The Grinding Area. This High Amount Of Air Is Converted In To A Tremendous Turbulence By The Rotating & Stationary Parts Of The Machine As Well As By An Appropriate Guidance Of The Air Stream In The Mill. This Machine Is Best Suitable In Pharmacutical Industry.

Product Details :

• Ribbon Blender + Roaster IS Available WITH Us In Different Operating Specifications To Choose From And Provides Working As A HEAVY Duty Blender. The Equipment Finds The Use For Allowing Easy Mixing Of Pre-Processed Powder Like Dried Granules, Pre-Sieved Powders, And Others.
• In Addition To This It Will Roast Your Product Upto The Desired Temperature Simultaneously.

Turbo Sifter / Rotary Sifter - Rotary Sifter Is Designed To Remove Dust Or Over-Sized Particles From BUYERS’ Products. Product Is Fed Into The Centre Of A Cylindrical Rotating Screen. . The Product Is Fed Into The Machine At The FEEDING INLET And Rotated Inside A Mesh Drum (With Changeable Sieve Panels.

Hammer Mills Consist Of A Series Of Hammers (Usually Four Or More) Hinged On A Central Shaft And Enclosed Within A Rigid Metal Case. It Produces Size Reduction By Impact. The Materials To Be Milled Are Struck By These Rectangular Pieces Of Hardened Steel (Ganged Hammer) Which Rotates At High Speed Inside The Chamber.

Applications :

• Automatic Weighing Of The Bags
• Automatic Stichng Of The Bags + Your Brand Name
• Stichting Of Bags Weighing 10kg To 25 Kg
• Complete Online Stitching Of Bags

Plansifter Is Driven By A Motor Which Is Installed Inside The Main Frame And Counter-Balanced By A Counterweight. Each Machine Has 4, 6, Or 8 Sections Sieves Inside. Different Materials Flow Into Different Sections On Their Own Route. According To Individual Design For Different Materials, The Sieves Sift Different Granular Materials To Different Passages In Flour Mills When The Whole Machine Is Running.

It Is Use For Several Phases:

• As In For Pneumatic Suction Of The Material
• As In For Pneumatic Grinding
• As In For Lifting Material Upto Any Height

A Screw Conveyor Or Auger Conveyor Is A Mechanism That Uses A Rotating Screw Blade Within A Tube, For Moving Granular Materials. They Are Used In Many Bulk Handling Industries. The Rate Of Volume Transfer Is Proportional To The Rotation Rate Of The Shaft.

Product Details :

• Feeding Any Machinery Installed At A Certain Distance Through Means Of Elevator, Pneumatic Suction Or Pusher System.
• Pre-Installed With Magnets And Dust Control Unit For Removing Dust From The Line.

Product Details :

• This System Is Specially Designed For Mixing Several Ingredients For Making One Product.
• This System Works On Scada Software
• You Can Hide Your Ingredients Formula From Other’s
• You Can Control The Complete Plant From Your Phone
• Online Measuring Of Different Products And Their Blending + Grinding – Complete Online Unit.

It Is Use For Connecting Two Different Output Lines At One Feeding Point. It Is Connected Pneumatically & 100% Efficency Is Achieved.

Product Details :

• This System Conveys Your Material With A Push Blow System Which Consumes Less Power Consumption.
• We Can Fill As Much Silo’s We Want To Fill.

Products Details :

• Magnetic Tubes Are Commonly Used To Remove Small To Medium Size Ferrous Tramp Metal Contaminants From A Variety Of Product Streams.
• It Can Be Use In The Powder Flowing Line So That Contamination Can Be Stop In Between Before The Output.

A Bucket Elevator Can Elevate A Variety Of Bulk Materials From Light To Heavy And From Fine To Large Lumps.The Bucket Elevator Is The Enabling Technology That Permitted The Construction Of Grain Elevators. A Diverter At The Top Of The Elevator Allows The Grain To Be Sent To The Chosen Bin.