Other Products / Services #412779

Duplex stainless steels are called "duplex" because they have a two-phase microstructure consisting of grains of ferritic and austenitic stainless steel. This structure provides a unique set of benefits, Duplex stainless steels are about twice as strong as regular austenitic or ferritic stainless steel.

Our precision quality bars are known for best machinability as they are made out of the most advanced and specially designed production line that maintains and gives consistent mechanical and chemical facts as per customer requirement. All the bars are thoroughly checked for ultrasonic flaws and are packed using specially designed equipments using distance rings, which is then packed in plywood boxes.

We offer superior quality Stainless Steel bright bars in various finish options.Cold drawn, Solution Annealed, Oil & Water Quenched Tempered. 100% identified by Handheld Spectrometer.

Length - Upto 9 meter, Saw end cuts. Suitable for Forging, Re-rolling, Ring Rolling & Up-setting. Marked with heat number, Grade, Size & Weight. Free from Radioactive elements, Mercury & Lead contamination.

Hot Rolled (Black) Surface, 100% Material Identity tested through handheld Spectrometer, Free from radioactive elements & mercury, lead contamination.

With a wide range of Stainless and Alloy Steel grades, we offer variety of ingots in weight up to 22 M.T. in square, octagonal and round shapes as following: Ingots are supplied in Spot Grinded or Fully Grinded Condition, Free from radioactive elements & mercury, lead contamination.

Cold Drawn, Solution Annealed, Oil & Water Quenched Tempered, Chamfered Ends, Plain ends without Burrs or Sharp Edges, Free from radioactive elements & mercury, lead contamination, As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.

We are offering Precision Quality Shaft Bars.Size range6mm - 75mm (14" - 3")supply conditionslength - 3 to 6 meterstolerances - h7, h8, h9, j6, f7, f8straightness - 0.5 mm per meterheat treatments - soft annealing, solution annealing, quenched, & temperedfree from radioactive elements & mercury, lead contamination.

ize RangeSize (mm) Size (inch) Thickness (mm) Thickness (in Inches)25 x 25 1" x 1" 3, 4, 5 18", 16", 15"30 x 30 1 16 x 1 16 3, 4, 5 18", 16", 15"32 x 32 1-14" x 1-14" 3, 4, 5 18", 16", 15"35 x 35 1-38 x 1-38 3, 4 , 5 18", 16", 15"40 x 40 1-47" X 1-47" 3, 4, 5, 6 18", 16", 15", 14"50 x 50 2" X 2" 4 , 5, 6 16", 15", 14"60 x 60 2-38" X 2-38" 5, 6 15", 14"63 x 63 2-12" X 2-12" 5, 6 15", 14"65 x 65 2-59" X 2-59" 6, 7, 8 14", 932", 516"70 x 70 2-34" X 2-34" 7, 8, 9, 10 932", 516", 38", 25"75 x 75 3" X 3" 6, 7, 8, 9, 10 14", 932", 516", 38", 25"80 x 80 3-18" X 3-18" 6, 7, 8, 9, 10 14", 932", 516", 38", 25"

We are offering hot rolled round corner squares. Size range45 mm x 45 mm55 mm x 55 mm63 mm x 63 mm75 mm x 75 mm80 mm x 80 mm85 mm x 85 mm95 mm x 95 mm100 mm x 100 mmsupply conditionslength upto 8 metershot rolled ( black ) surface100% ultrasonically testedspot grinded or fully grinded surfacefree of surface defectscrackscold sawablesmooth ends without sharp edges100% material identity tested through handheld spectrometerfree from radioactive elements & mercury, lead contamination

We provide precipitation hardening steel. They are used in the oil and gas, nuclear and aerospace industries where a combination of high strength, corrosion resistance and a low but acceptable degree of toughness is required. Precipitation hardening is achieved by adding copper, molybdenum, aluminium and titanium either individually or incombination.

Duplex stainless steels are called "duplex" because they have a two-phase microstructure consisting of grains of ferritic and austenitic stainless steel. This structure provides a unique set of benefits

We are offering square and hexagonal bright bars.Size range16mm - 45 mm ( 58" - 1 34")supply conditionslength - 3 to 6 meterstolerances - h11, k12, k13grit polished as per customers requestheat treatment - cold drawn, solution annealed, oil & water quenched temperedbars end finish - chamfered ends, plain ends without burrs or sharp edgesspecifications - as per en, din, jis, astm, bs, asme, aisi, etc.100% identified through handheld spectrometerfree from radioactive elements & mercury, lead contamination.

We are offering forged & turned round bars.Size range125 mm 500 mm (5" - 20")supply conditionslength - 3 to 6 meterssolution annealedheat treatments -soft annealed, solution annealed, quenched & temperedultrasonic testedfree from surface defects and cracks100% identified with handheld spectrometerfree from radioactive elements & mercury, lead contamination.

Size RangeIngot Size (in inches) Shape WT. (in kilograms) Mould Drawings10 " x 12 " x 52 " Square 825 Download11 " x 13 " x 52 " Square 970 Download13 " x 15 " x 62 " Octagonal 1, 160 Download13 " x 15 " x 62 " Square 1, 565 Download14 " x 16 " x 62 " Square 1, 900 Download14 " x 17 " x 72 " Square 2, 050 Download16.5 " x 20 " x 65 " Square 2, 560 Download18 " x 21 " x 67 " Octagonal 2, 300 Download19 " x 26 " x 70 " Square 4, 100 Download21 " x 23 " x 67 " Octagonal 3, 400 Download23 " x 27 " x 70 " Octagonal 5, 100 Download27 " x 30 " x 62 " Octagonal 6, 100 Download31.5 " x 38 " x 73 " Octagonal 10, 000 Download38 " x 47 " x 70 " Octagonal 14, 500 Download42 " x 52 " x 81 Octagonal 18, 000 Download42 " x 52 " x 90 Octagonal 20, 00022, 000 Download