Machines come equipped with filtration system. Then why do we need an additional filtration system such as Klarol!

• Machine Filters cannot remove contamination smaller than clearances of critical components
• Small percentage of water can also reduce component life which machine filters cannot remove.
• Machine filters cannot remove air bubbles that cause thermal oxidation of oil.

Therefore, it is important that an additional filtration system is required to maintain oil clean for optimum performance of hydraulic systems. Here, comes the role of Klarol Hydraulic Oil Cleaning System. Klarol System Cleans Oil In Two Stages :

• Stage-1 : Removes solids contamination by Depth filtration and Electrostatic attraction.
• Stage-2 : Removes water, fuels, entrained air and gases by evaporation.

Applications :

• Klarol can be used to clean oil as a mobile machine.
• Klarol can be installed directly on any machine as a by-pass oil cleaning unit.

Cleanliness Levels Of Oil :

• NAS Class 9 : indicates the particulate levels of hydraulic fluid as received from the refinery or oil supplier.
• NAS Class 7 : indicates the particulate level of hydraulic fluid required for most conventional hydraulic systems that do not include hydraulic pressure regulators or hydraulic servo-control valves.
• NAS Class 5 : indicates the particulate level of hydraulic fluid required for hydraulic systems when there are hydraulic pressure regulating valves and hydraulic servo-valves.

Utility : Klarol Oil Cleaning Systems can be utilized to clean almost all industrial oil such as :

• Hydraulic Oils
• Compressor Oils
• Transmission Oils
• Synthetic Oils
• Engine Oils
• Gear Oils
• Turbine Oils
• Honing Oils
• Water Glycol
• Kerosene & Any Other Industrial Oils

Machines come equipped with filtration system. Then why do we need an additional filtration system such as Klarol!

• Machine Filters cannot remove contamination smaller than clearances of critical components
• Small percentage of water can also reduce component life which machine filters cannot remove.
• Machine filters cannot remove air bubbles that cause thermal oxidation of oil.

Therefore, it is important that an additional filtration system is required to maintain oil clean for optimum performance of hydraulic systems. Here, comes the role of Klarol Hydraulic Oil Cleaning System. Klarol System Cleans Oil In Two Stages :

• Stage-1 : Removes solids contamination by Depth filtration and Electrostatic attraction.
• Stage-2 : Removes water, fuels, entrained air and gases by evaporation.

Applications :

• Klarol can be used to clean oil as a mobile machine.
• Klarol can be installed directly on any machine as a by-pass oil cleaning unit.

Cleanliness Levels Of Oil :

• NAS Class 9 : indicates the particulate levels of hydraulic fluid as received from the refinery or oil supplier.
• NAS Class 7 : indicates the particulate level of hydraulic fluid required for most conventional hydraulic systems that do not include hydraulic pressure regulators or hydraulic servo-control valves.
• NAS Class 5 : indicates the particulate level of hydraulic fluid required for hydraulic systems when there are hydraulic pressure regulating valves and hydraulic servo-valves.

Utility : Klarol Oil Cleaning Systems can be utilized to clean almost all industrial oil such as :

• Hydraulic Oils
• Compressor Oils
• Transmission Oils
• Synthetic Oils
• Engine Oils
• Gear Oils
• Turbine Oils
• Honing Oils
• Water Glycol
• Kerosene & Any Other Industrial Oils