Mumbai, Maharashtra, India
Our Products
This chipper shredder vacuum is the ultimate in convenience around the home or commercial property.
The CS2465 eliminates raking, piling, hauling, and bagging leaves. Just run the vacuum over the lawn and the leaves will be picked up in 24" (61cm) width, shredded, and bagged for you. The leaves and debris are reduced by up to 8 to 1. With the large 100 litres bag you will be able to remove up to the equivalent of a 800 litre bag before the easily emptied bag needs to be emptied!
The bag features dual zippers opening three sides for easy dumping without taking the bag off the machine.
Engine: 205cc Briggs & Stratton 6.5 HP OHV, recoil start
Function: Chipper, shredder & vacuum
Capacity: 75mm chipping
Cutting System: Chipper blades & flail
Drive System:Push type
Wheels: Pneumatic
Bag Capacity: 100 litres
Vacuum Nozzle: 24" / 61cm
Engine power Briggs and Stratton:- 17.5HP
Engine feature:- OHVCylinders 1/Cast-iron sleeve.
Starting:- Electric.
Fuel capacity:-7.5 L
TRANSMISSION:-
Type:-Hydro-static
Speed forward:-8.8Km/h
Speed reverse:-4.5Km/h
CHASSIS:-Frame Robotically Welded
Tyres front:-15 x 6.00-6
Tyres rear:-18 x 8.5-8
Turning radius:-45 cm.
UNIT SPECIFICATIONS:-
Length :-2600 mm
Width:-1080 mm
Height :-1080 mm
Weight :-210 Kg
MOWER:-
Cutting Blade engage - Electric PTOCutting Width :-102 Cm /40 inch
Mower Deck:-Steel
Collector Capacity:-270 L
Cutting Height:-30 mm 90 mm
Blades:-Twin
Discharge:-Rear
FEATURES:-Adjustable Sliding Seat:-Yes
Ergonomic Steering Wheel:-Yes
Powder-Coated Cutting deck:-Yes
Visible fuel level:-Yes
Headlights:-Yes
Cup Holder:-Yes
Electric PTO - yes
Reverse cutting - Yes
Speed range: 30-55 MPH (85 KMPH) Throws dimpled, leather, lite balls
Repetitive pinpoint accuracy Extremely fast wheel recovery time
Perfect for both outdoor and indoors use Optional 12 ball Auto feeder available Package includes kids & adult tripod stand Also available wheeled variable height tripod stand.
Shipping Weight of 30 Kgs
spinshot - External battery This allows batteries to be swapped without opening the power cage. If you want to make use of multiple batteries or one with a higher capacity, this will allow for more hours of uninterrupted training.
Spinshot hybrid- mains and external battery option Have the reliability of both mains power and battery. Make use of a standard AC socket when available, then switch instantly to battery power when needed.
Compact cordless brushcutter for straightforward trimming and clearing work in outdoor areas at home. Integrated battery with charge level indicator, shaft and loop handle offering tool-free adjustment, adjustable mowing unit working angle (useful for vertical edge trimming among other tasks), easy to switch between PolyCut blades and mowing lines without changing the mowing head, spacer bracket. Battery charging time: 145 min/210 min (80%/100%). Approximate working time up to 20 minutes.
| Rated voltage V | 18 |
| Sound pressure level dB(A) 1) | 77 |
| Sound power level dB(A) 1) | 87 |
| Vibration value, right m/s2 2) | 4.9 |
| Vibration value, left m/s2 2) | 1.7 |
| Total length cm 3) | 110 |
| Cutting diameter mm | 250 |
| Standard cutting tool | PolyCut 2-2 |
| Battery life time with PolyCut 2-2 min 4) | up to 20 |
| Battery life time with mowing head min 4) | up to 12 |
To clear large areas of leaves and grass, suitable for use in very dusty areas, thanks to the new HD2 filter. Round nozzle, flat nozzle, STIHL anti-vibration system, STIHL Elasto-Start, 2-MIX engine, locking throttle lever with stop button.
| Displacement | 27,2 cm³ |
| Weight 1) | 4,4 kg |
| Sound pressure level 2) | 90,0 dB(A) |
| Sound power level 2) | 104,0 dB(A) |
| Vibration level right 3) | 1,7 m/s² |
| Air throughput 4) | 780 m³/h |
| Air flow rate | 610 m³/h |
| Max. air throughput 5) | 810 m³/h |
| Operating speed with nozzle | 7.200 1/min |
| Tank volume 6) | 440 cm³ |
| Equipment | Runddüse und Flachdüse |
The easy-to-use and quiet STIHL BGE 71 electric blower unit can be used to clear up gardens, pavements and a variety of other areas. Highly effective noise reduction with powerful blower capacity. When combined with the practical vacuum adaptor kit, the blower unit can be converted into a vacuum unit with catcher bag for compressing large volumes of waste.
| Rated voltage | 230-240 V |
| Weight 1) | 3 kg |
| Power output | 1.100 W |
| Sound pressure level 2) | 85,0 dB(A) |
| Sound power level 2) | 100,0 dB(A) |
| Vibration level right 3) | 1 m/s² |
| Max. air throughput 4) | 670 m³/h |
| Air speed 5) | 66 m/s |
| Air throughput 5) | 510 m³/h |
For cleaning large spaces around the home. Flat nozzle, rubberised 2-component handle, infinite speed control, lock button to lock air stream, cable strain relief, with the retrofittable vacuum attachment it can also be used as a vacuum shredder.
| Rated voltage | 230 V |
| Weight | 3,3 kg |
| Power output | 1.400 W |
| Sound pressure level | 89,0 dB(A) |
| Sound power level | 103,0 dB(A) |
| Vibration level right | 4 m/s² |
| Max. air throughput | 750 m³/h |
| Air speed | 76 m/s |
| Air throughput | 570 m³/h |
Briggs and stratton 208cc with 2:1 gear reduction Petrol engine fitted with KKK branded Outboard long tail shaft for small fishing boats.
Engine Technology Single cylinder, 4-stroke, air-cooled, OHV (Overhead Valve) Model Number 130G Gross Torque* (Nm) @ 2'600 rpm 12.88 Displacement (cc) 208 Max RPM 1800 Gear box 2:1 reduction Cylinder Cast Iron Sleeve Bore (mm) 68.3 Stroke (mm) 55.9 Fuel Tank Capacity (l) 3.1 Oil Capacity (l) 0.6 Dry Weight (kg) 16.0 Dimensions Length (mm) 321 Dimensions Width (mm) 376 Dimensions Height (mm) 346
Engine Technology Single cylinder, 4-stroke, air-cooled, OHV (Overhead Valve)Model Number 19N1 Gross Torque* (Nm) @ 2'600 rpm 19.66 Displacement (cc) 306Cylinder Cast Iron Sleeve Bore (mm) 82.0 Stroke (mm) 52.0 Fuel Tank Capacity (l) 5.3 Oil Capacity (l) 1.1Dry Weight (kg) 25.0 Dimensions Length (mm) 327 Dimensions Width (mm) 309 Dimensions Height (mm) 442
Engine Technology Single cylinder, 4-stroke, air-cooled, OHV (Overhead Valve) Model Number 10R2 Gross Torque* (Nm) @ 2'600 rpm 10.2 Displacement (cc) 163 Cylinder Cast iron sleeve Bore (mm) 68.0 Stroke (mm) 45.0 Fuel Tank Capacity (l) 3.0 Oil Capacity (l) 0.6 Dry Weight (kg) 15.0 Dimensions Length (mm) 291 Dimensions Width (mm) 368 Dimensions Height (mm) 330
Engine Technology Single cylinder, 4-stroke, air cooled, OHV (Overhead Valve) Model Number 31R7 Gross Torque* (Nm) @ 3'600 rpm 34.63 Displacement (cc) 500 Cylinder Cast Iron Sleeve Bore (mm) 90.5 Stroke (mm) 77.8 Oil Capacity (l) 1.4 Dry Weight (kg) 29.5 Dimensions Length (mm) 479 Dimensions Width (mm) 393 Dimensions Height (mm) 327
Engine Technology Single cylinder, 4-stroke, air cooled, OHV (Overhead Valve) Model Number 33R8 Gross Torque* (Nm) @ 3'600 rpm 41.56 Displacement (cc) 540 Cylinder Cast Iron Sleeve Bore (mm) 94.0 Stroke (mm) 77.8 Oil Capacity (l) 1.4 Dry Weight (kg) 29.5 Dimensions Length (mm) 479 Dimensions Width (mm) 411 Dimensions Height (mm) 327
Engine Technology Single cylinder, 4-stroke, air-cooled, DOV (Direct Overhead Valve) Model Number 1008 Gross Torque* (Nm) @ 2'600 rpm 9.49 Displacement (cc) 161 Cylinder Cast Iron Sleeve Bore (mm) 64.0 Stroke (mm) 50.0 Fuel Tank Capacity (l) 1.0 Oil Capacity (l) 0.6 Dry Weight (kg) 11.1 Dimensions Length (mm) 369 Dimensions Width (mm) 325 Dimensions Height (mm) 254
Engine Technology Single cylinder, 4-stroke, air-cooled, OHV (Overhead Valve) Model Number 122Q Gross Torque* (Nm) @ 2'600 rpm 11.5 Displacement (cc) 190 Cylinder Cast Iron Sleeve Bore (mm) 68.3 Stroke (mm) 51.8 Fuel Tank Capacity (l) 1.1 Oil Capacity (l) 0.6 Dry Weight (kg) 11.2 Dimensions Length (mm) 397 Dimensions Width (mm) 326 Dimensions Height (mm) 238
BOWLER ANIMATIONS give players the natural cues they need to get ready for each shot and releases all their normal batting triggers, ' is how MCC Head Coach Mark Alleyne described the innovations introduced by the new 'TrueMan by BOLA' Bowling Machine.
The TrueMan displays a high-contrast LED animation of a bowler on the front of the Bowling Machine which synchronises exactly with release of the ball.
England opener Nick Compton described the TrueMan as 'quite an experience. Once you get use to it, it is a lot more realistic.'
TrueMan was developed from bowling machines designed by BOLA that incorporated projected images of bowlers for SMAAASH, an Indian company operating twenty lane cricket centres in an entertainment environment.
For club and professional cricketers projected images are only effective in low light levels and as all serious cricket practice always takes place in well lit circumstances BOLA had to find an alternative. The answer was a mono, high-contrast LED screen that works in well lit cricket facilities as well as outdoor nets.
"The bowler animations are all legitimate bowling actions that encourage the player to employ the right batting sequences and make cleverer decisions, " said Mark Alleyne.
Real life bowler animationsThe bowler animations are produced by artwork made from real life video footage and so an extensive library of actions and styles of bowling can be built up with any player's action being able to be reproduced.
"Working on the BOLA machine as a batsman is something we do all day and every day and to put a different component to it makes it a little bit more exciting and a little bit more real, " says Nick Compton.
The TrueMan is electromechanically active and programmable by any Wi-Fi enabled device (tablet, phone or laptop) by downloading the BOLA app. All the machines functions (line, length, speed and swing) can then be manipulated and saved as individual balls, overs or spells. They can then be used as selected or 'shuffled' to produce random sequences. The bowler animations can be changed at any time and can be matched with any number of deliveries.
The bowler animations are all legitimate bowling actions that encourage the player to employ the right batting sequences and make cleverer decisions
If you choose not to pre-programme each delivery a random variation of speed, line and length can be programmed.
"I would definitely recommend it to club cricketers and guys willing to get out there and practice facing different types of deliveries and also not being able to set up to a particular delivery, " said Nick Compton. "I think it's great that you can actually get that visual, really see that guy running in and get your timings from that."
The TrueMan can be speedily set up by one person and can be easily wheeled through a normal one metre doorway. The Machine's frame will compress itself to fit under a standard 2.05 metre door height so that storage away from a playing area is never a problem.
Elevator Feeder SystemA new 'elevator' feeder system has been developed to maintain the machines storage height but it also removes the feeder (or any other visual interference) above the image of the bowler making his run up.
"It is important for young cricketers to see new technology coming into the game that is relevant to them, " said Nye Williams, MD of BOLA Manufacturing. "If you give the controlling device of the TrueMan to a young player, they understand immediately, there is no questioning of the technology and they just get on with it."
"The TrueMan has been enthusiastically received by all the players. At this time of year, early in the season, it is the perfect tool for developing strategic practice where we focus on batting strategy rather than batting technique, " said Mark Alleyne.
"Many of the players are doing extra sessions since the arrival of the TrueMan. The wicket keepers in particular seem to have taken to it. They can set the machine up and practice by themselves."
Hand Roller Manual push-pull 250kgs We Manufacturered by Ha-Ko Group Manual Pitch rollers to roll pitch, these rollers are considered as Light weight rolling and are also used for cross rolling for finishing of the cricket pitches.
ROLLERS WILL BE FABRICATED FROM THICK M.S. PLATE WITH PULLING HANDLE OF PIPE AND ANGLE, WITH HEAVY DUTY PEDASTAL BEARING DULY BALLASTED.
BOLA PROFESSIONAL CRICKET BALL MACHINE Over 50, 000 units are supplied all over the world, approved by firms like ICC (international cricket council) & BCCI. Fully Enclosed Cricket Bowling Machine. Concave profile moulded urethane ball delivery wheels. Microprocessor based digital speed control with membrane switch panel. Adjustable speed in 1 mph increments between 15 and 95 mph (155 kmph).Spin, swing and pace bowling with 19 spin and swing settings. Electronic random variation facility with solid state electronic wheel braking. Ball joint complimented by vernier screw adjustment for precision line and length. Auto random delivery mode. (operational with auto feeder) Operation from 12 volt battery or with BOLA Power Pack from 230v Mains supply. Optional 28 ball Auto feeder available with wireless remote (not included with machine
The Lawncare Le V800 wheeled leaf and litter vac is designed for home and estate use and is perfect if you have large areas which need leaves, litter and other debris to be collected. The wide 80cm working width and large 240 litre collection box ensure efficient working whilst the 3m clear hose supplied with the LeV800 leaf and litter vacuum can be used in those areas where is difficult to reach.
FEATURES:
3 Metre Hose Kit
The Le v800 leaf and litter vacuums are supplied with a 3m hose which can be fitted allowing for accurate working
Easy To Open Collector Bag
The extra-large 240L leaf and litter collection bag can easily be opened from the back for simple emptying
Heavy Duty Front Castor
The heavy duty front castor wheels enable the leaf and litter vacuum to be easily manoeuvred around the garden.
Adjustable Working Height
The working height of leaf and litter vacuum can easily be adjusted using the central adjustment lever.
| Service Code | Le v800 |
| Engine | B&S/Honda 160cc |
| Power (kW) | 3.6 kW @ 3600rpm |
| Displacement (cc) | 160 |
| Fuel Tank Capacity | 3.6 Litres |
| Chassis | Steel |
| Working Width | 80cm / 32" |
| Work Area | up to 5000m² |
| Impeller Type | Steel |
| Transmission | Single Speed |
| Drive Speed m/s | 0.91 m/s |
| Drivespeed km/h | 3.28 km/h |
| Collector capacity | 240 Litres |
| Folding Handles | Yes |
| Handle Bar Controls | Stop Switch / Throttle |
| Working Height | 13 - 100mm |
| Wheel Diameter | F: 160mm / R: 300mm |
| Vibration Level (m/s2) | 4.6 m/s2 |
| Weight (kg) | 81.5kg |
BOLA Automatic Ball Feeder has a modified bracket to make it more robust and allow it to be used when the bowling machine is set up for spin. The new Feeder provides an exceptionally reliable and accurately timed feed. The new bracket is a one-piece fabrication which is simpler to fit and use. It can be attached in less than 2 minutes and feeds a ball into the machine every 7 or 11 seconds (as selected). Optional remote control on/off switch allows interruption of the sequence when required. An ultra bright LED indicator and a beeper warn of the release of a ball. The ball feeder offers a unique solo batting practice facility or the option to coach from any position.
Spinshot Plus provides randomized horizontal and vertical oscillation, and ball speed control to simulate match play scenarios. Spinshot Plus will deliver multi-function speed control, horizontal and vertical oscillation, top spin and back spin. It has the ability to control two-line horizontal and vertical oscillation to ensure any ball return keeps you on your toes to move through your range of shots.
Control the machine through ourmobile phone app, providing optimal usability and adjustment of its many features. The multi-function speed control delivers a constant ball speed of up to 110km per hour with adjustable top spin and back spin all at your fingertips.This match-play simulation will keep event the advanced players on their toes while fighting to win each shot.
Spinshot Plus is lighter and more compact than any other ball machine with similar features. Towing wheels are incorporated on the machine and you can put all your tennis equipment on the machine and tow them together.
Dimensions & Weight50CM(H)50CM(L)35CM(W)
19kg for the AC model21kg for the battery model
Speed
Spinshot Plus can deliver balls up to 110kmph and with top spin, this can be adjusted right down to 30kmph to mimic all kinds of shots.
Feed ControlBall feed rate is controllable from 2 seconds to 10 seconds every shot.
Trajectory / Height ControlBall trajectory is electronically adjustable from the front panel.
Spin ControlElectronically adjustable for different degrees of back and top spin. Mastery of top and back spin is what separates the average player from a champion!
Oscillation ModesThe Spinshot Plus model is equipped with 5 different oscillation modes as listed below. Settings can be easily done through the control panel, and offering you full versatility for your favourite workouts or drills.
RANDOM HORIZONTAL OSCILLATION2-LINE HORIZONTAL OSCILLATIONVERTICAL OSCILLATIONRANDOM HORIZONTAL AND VERTICAL OSCILLATION2-LINE HORIZONTAL AND VERTICAL OSCILLATION
The Spinshot Plus tennis ball machine will allow you to program different oscillation parameters to customise your own court drills. H1-H2 will be used to program the vertical oscillation, and W1-W2 will be used to program the 2-line oscillation width. The user can program the spin, speed and shots in different oscillation modes.
Power InputThe tennis ball machine's battery can support 2-3 hours of play. It won't quit until you're ready to stop. Simply charge after each use and it's ready to go.
The machine will be shipped with a battery charger that is compatible with our 12V batteries. The smart design of the power cage and removal of the battery cover makes it extremely easy to install the battery or upgrade your machine to an AC supply.
The foldable ball hopper holds over 120 balls.
Comparable ProductsThe Spinshot Plus tennis ball machine provides similar functionality to competitor products such as the Lobster Elite 3 machine. The advantages of the Spinshot Plus machine when compared to Lobster Elite 3 are as follows:
The Briggs & Stratton 550 Series Horizontal OHV Engine runs cooler and cleaner, delivering more power, smoother operation, longer engine life and improved fuel economy. An excellent, compact performer that you can depend on for mid-duty applications.
| Engine Type | Single cylinder, 4-stroke, air-cooled, OHV (Overhead Valve) |
| Model Number | 831 |
| Gross Torque (Nm) @ 3'060 rpm | 7,5* |
| Displacement (cc) | 158 |
| Cylinder | Cast iron |
| Bore (mm) | 65,1 |
| Stroke (mm) | 47,7 |
| Fuel Tank Capacity (l) | 0,8 |
| Oil Capacity (l) | 0,6 |
| Dry Weight (kg) | 9,0 |
| Dimensions Length (mm) | 324 |
| Dimensions Width (mm) | 294 |
| Dimensions Height (mm) | 242 |
OHV design for cooler operation, longer valve life Dura-Bore cast iron cylinder sleeve for extended life Float carburetor for consistent, easy startingMaintenance-free Magnetron electronic ignition for quick, dependable startsMaxi-Clean automotive-style paper air filter for superior protection and long engine life Dual oil filter and drain Dual ball bearings reduce wear for long lifeDuraLube gear-driven splash lubrication continuously supplies oil to all internal parts Super Lo-Tone Muffler reduces noise level 50-state compliant engine
| Manufacturer's Warranty | 1 year commercial use | ||
| Ship Weight | 35.0 lbs | ||
| Engine Displacement (cc) | 127 | ||
| Start Type | Recoil | ||
| Application | Mid-duty chore | ||
| Engine Type | 550 series | ||
| Torque (ft./lbs.) | 5.5 | ||
| Shaft Output | Horizontal | ||
| Crankshaft | 3/4 x 2 | ||
| Shaft Diameter (in.) | 03/04/18 | ||
| Shaft Length (in.) | 2 | ||
| Shaft Keyway (in.) | 03/16/18 | ||
| Shaft Rotation (From PTO Shaft Side) | Counterclockwise | ||
| Gear Reduction | 06:01:00 AM | ||
| PTO Height (in.) | 4.17 | ||
| Bearing Type | Ball | ||
| Cylinders (qty.) | 1 | ||
| Cylinder Bore | Cast iron | ||
| Bore x Stroke (in.) | 2.44 x 1.65 | ||
| Cooling System | Air cooled | ||
| Air Cleaner Type | Dual element | ||
| Fuel Tank | Yes | ||
| Fuel Type | Gasoline | ||
| Fuel Tank Capacity (qt.) | 2 | ||
| Fuel Pump | No | ||
| Fuel Filter | Yes | ||
| Oil Capacity (qt.) | 0.63 | ||
| Lubrication System | Splash | ||
| Low Oil Alert | No | ||
| Low Oil Shutdown | No | ||
| Ignition System | Electronic | ||
| Governor System | Mechanical | ||
| Carburetor | Float | ||
| Throttle Control | Manual | ||
| Choke Control | Manual | ||
| Max. RPM | 3600 | ||
| Muffler Included | Yes | ||
| Auto Compression Release | Yes | ||
| Mounting Base L x W (in.) | 7 x 4 | ||
| Mounting Bolt Pattern L x W (in.) | 6 3/8 x 3 1/8 | ||
| Dimensions L x W x H (in.) | 13 x 15 x 13 | ||
| EPA/CARB Approval (California Air Resource Board) | Yes | ||
Engine Series - B&S Vanguard Engine Style - Horizontal Cylinders - 1 Engine Type - 4-Cycle OHV Cooling System - Air Dry Weight - 50 Lbs CC - 205 CCs HP - 6.5 HPCylinder Bore Type - Cast Iron Bore - 2.68 Inches Stroke - 2.2 InchesCompression Ratio - 8.3 Systems Starting System - Recoil Only Ignition System - Electronic Spark Lubrication Lubrication - Splash Oil Filter - No Oil Capacity - 20 ozIntake/Exhaust Fuel - petrol Carburetor - Float Muffler - Included Air Cleaner - Dual Element Fuel Tank Size - 0.85 Gallons Fuel Tank - Included Crankshaft Crankshaft Rotation Direction - Counterclockwise Shaft Size - 3/4 x 2 Inches Crankshaft Type - 6:1 Gear Reduction Crankshaft Diameter - 3/4" Crankshaft Length - 2" Crankshaft End Tapped Size 6:1 Gear Reduction Crankshaft Keyway Width - 3/16 Inches PTO Height - 4-11/64 Inches
Engine Technology Single cylinder, 4-stroke, air cooled, OHV (Overhead Valve) Model Number 21R8 Gross Torque* (Nm) @ 3'600 rpm 25.72 Displacement (cc) 344Cylinder Cast Iron Sleeve Bore (mm) 87.3 Stroke (mm) 57.5 Fuel Tank Capacity (l) 2.6 (Optional)Oil Capacity (l) 1.4 Dry Weight (kg) 26.8 Dimensions Length (mm) 452 Dimensions Width (mm) 393 Dimensions Height (mm) 327
The Briggs & Stratton 950 Series 2:1 Gear Reduction Horizontal OHV Engine runs cooler and cleaner, delivering more power, smoother operation, longer engine life and improved fuel economy. An excellent, compact performer that you can depend on for mid-duty applications.
High Performance and Extended Durability
These engines are designed for frequent use in demanding work environments
Engine Type: Single cylinder, 4-stroke, air-cooled, OHV (Overhead Valve)
Model Number: 130G
Displacement (cc): 208
Power Level Gross HP @3600 rpm: 6.5
Cylinder: Cast Iron Sleeve
Fuel tank capacity (l): 3.1
Oil capacity (l): 0.6
Dry weight (kg): 16.0
Hand and powerful electric brushcutter appropiate for trimming lawn and bed edges, for small to medium lawn areas
Cleaning around trees and bushes and cutting of knobby shrubs
Anti-Vibration handle for relaxed working, Twist & Trimm system for fast changing of the line, easy to use with separable shaft-Twin-line system with tap-feed automatic for line adjustment
| Model | HK-B200 |
| Displacement (cm3) | 40.6 |
| Max. output kW / HP | 0.97 / 1.3 |
| Weight (kg) | 8.5 |
| Fuel tank capacity (litre) | 0.9 |
