Mumbai, Maharashtra, India
GST : 27ACUPC0475F1ZK
Verified
Add Review
Our Product / Services
Stainless Steel Alloy 309 UNS 30900 / 30908 Werkstoff 1.4828 :
Alloy 309 is an austenitic chromium-nickel stainless steel which has excellent heat-resisting properties. Alloy 309 has improved corrosion resistance and better creep strength than alloy 304. Alloy 309 is used in furnace parts, fire box sheets, high temperature containers and weld wire.
Specifications :
Stock Availability Of Contact Sales
| Grade | US Aerospace/Military | US Commercial | British Specification | European Specification | Other |
| 309 | AMS 5523 Sheet / strip / plate AMS 5574 Seamless tube AMS 5650 Bar / tube / forgings AMS QQ-A-793 |
ASTM A276 / ASME SA276 ASTM A479 / ASME SA479 ASTM A484 / ASME SA484 ASTM A314 / ASME SA314 ASTM A580 / ASME SA580 |
BS 970; 309S24 | Werkstoff 1.4828 AFNOR Z15CN24-13 |
UNS 30900 (309) UNS 30908 (309S) |
Technical Data Sheet
| Weight % | C | P | Si | Ni | Mn | S | Cr | Fe | Mo | Cu |
| Alloy 309 | 0.08 max | 0.040 max | 1 max | 43814 | 2 max | 0.030 max | 22-24 | Bal | 0.75 max | 0.75 max |
Typical Mechanical Properties
| Condition | Ultimate Tensile Strength (MPa) | Yield Strength 0.2% (MPa) | Elongation 2" (%) | Reduction of Area (%) | Rockwell B Hardness | S | Cr | Fe | Mo | Cu |
| Alloy 309 round bar 1" annealed 1950°F, water quench | 620 | 276 | 50 | 77 | 83 | 0.030 max | 22-24 | Bal | 0.75 max | 0.75 max |
Incoloy 330 Pipes Alloy is a combination of nickel, iron and chromium alloys with silicon which makes them oxidation resistant in nature. They are non-corrosive in nature and have excellent microstructures that make them highly temperature resistant in nature. They are mostly used for heating purposes in several industries. They are highly durable and are available at a cheap rate.
More about Incoloy 330 Pipes Alloy :
Incoloy alloy 330 Seamless pipes and welded pipes are available as per AMS 5592, AMS 5716, ASME SB 511, ASME SB 535, ASME SB 536, and ASME SB 710, ASTM B 511, ASTM B 512, ASTM B 535, ASTM B 536, ASTM B 546, ASTM B 710, ASTM B 739EN 10095, UNS N08330, Werkstoff 1.4886, Incoloy 330 and Nicrofer 3718.
Chemical composition of Incoloy alloy 330 Pipes :
Alloy 5083 is available in Plate, Sheet, Strip, Forging Stock, Tube and Bar. Alloy 5083 tube is available in many sizes from stock, however there is a minimum production of 30m.
Specifications
Stock Availability Of Contact Sales
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
| 5083A95083 | BS N8 Alloy 5083 Sheet and Plate | AMS 4056 5083-0 Sheet and Plate | QQ-A-200/4 5083 Extruded bar, tube QQ-A-250/6 5083 Sheet and Plate |
Werkstoff 3.3547 | AlMg4.5Mn A-G4.5MC |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||
| Weight % | Al | Si | Fe | Cu | Mn | Cr | Mg | Ti | Zn | Other Each | Others Total |
| 5083 | Bal | 0.40 max | 0.40 max | 0.10 max | 0.40 / 1.0 | 0.05 / 0.25 | 4.0 / 4.90 | 0.15 max | 0.25 max | 0.05 max | 0.15 max |
Typical Mechanical Properties
| Material | Temper | Tensile Strength (N/mm²) | Yield Strength (N/mm²) | Elongation on 50mm |
| 5083 Extruded Bar (<5" diameter) |
0 | 39 | 16 | 14 |
| 5083 Extruded Bar (<5" diameter) |
H111 | 40 | 24 | 12 |
| 5083 Extruded Bar (<5" diameter) |
H112 | 39 | 16 | 12 |
Aluminum Alloy 6082 is available in Sheet and Plate, Aluminum 6082 Bar, 6082 is also available in Drawn Tube, Tube and Forging Stock.
Alloy 6082 is a medium strength alloy with excellent corrosion resistance. Alloy 6082 has the highest strength of the 6000 series alloy. Due to the higher strength of Alloy 6082 it has replaced Alloy 6061 in many applications. Alloy 6082 is typically used in highly stressed applications, Trusses, Bridges, Cranes, Transport applications, Ore Skips, Beer Barrels, Milk churns.
Specifications
Aluminium alloy 6082 also corresponds to the following standard designations and specification.
Stock Availability Of Contact Sales
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
| 6082A96082 | BS L111 Alloy 6082-T6 Bars and Sections BS L112 Alloy 6082 Forging Stock and Forgings BS L113 Alloy 6082-T6 Sheet and Strip BS L114 Alloy 6082-T6 Tube Drawn BS L115 Alloy 6082-T651 Plate BS HE30 6082 Extrusions BS HP30 6082 Plate BS HT30 6082 Tube BS HG30 6082 Wire BS HS30 6082 Sheet |
AMS 4056 5083-0 Sheet and Plate | QQ-A-200/4 5083 Extruded bar, tube QQ-A-250/6 5083 Sheet and Plate |
Werkstoff 3.3547 | AlMg4.5Mn A-G4.5MC |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||
| Weight % | Al | Si | Fe | Cu | Mn | Cr | Mg | Zn | Ti | Other Each | Others Total |
| 6082 | Bal | 0.7 - 1.3 | 0.50 max | 0.10 max | 0.40-1.00 | 0.25 max | 0.06-1.20 | 0.20 max | 0.10 max | 0.05 max | 0.15 max |
Typical Mechanical Properties 01
| Material | Thickness (mm) | Tensile Strength (N/mm²) | Yield Strength (N/mm²) | Elongation on 50mm % (min) |
| Alloy 6082 - T6 Sheet and Plate | 0.2 - 3.0 | 295 | 255 | 8 |
| Alloy 6082 T6 Sheet and Plate | 3.0 - 6.0 | 295 | 240 | 8 |
| Alloy 6082 T6 Sheet and Plate | 6.0 - 25.00 | 295 | 240 | 8 |
Typical Mechanical Properties 02
| Material | Diameter (mm) | Tensile Strength (N/mm²) | Yield Strength (N/mm²) | Elongation on 5.65v % (min) |
| Alloy 6082 T6 Bar | < 20 | 295 | 255 | 8 |
| Alloy 6082 T6 Bar | 20 - 150 | 310 | 270 | 8 |
| Alloy 6082 T6 Bar | 150 - 200 | 280 | 240 | 5 |
Aluminum Alloy 7050 is available in Plate, Extruded Wire, Rod and Bar.
Aluminium alloy 7050 is an aerospace grade of aluminium combining high strength, stress corrosion cracking resistance and toughness. It is particularly suited for heavy plate applications (3" to 6" thick) due to it's lower quench sensitivity and retention of strength in thicker sections. Aluminium 7050 therefore is the premium choice aerospace aluminium for applications such as fuselage frames, bulkheads and wing skins.
Aluminium 7050 plate is available in two tempers. T7651 (AMS 4201) combines the highest strength with good exfoliation corrosion resistance and average SCC resistance. T7451 (AMS 4050) provides better SCC resistance and excellent exfoliation resistance at slightly lower strength levels.
Specifications
Stock Availability Of Contact Sales
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
| 6082A96082 | BS L111 Alloy 6082-T6 Bars and Sections BS L112 Alloy 6082 Forging Stock and Forgings BS L113 Alloy 6082-T6 Sheet and Strip BS L114 Alloy 6082-T6 Tube Drawn BS L115 Alloy 6082-T651 Plate BS HE30 6082 Extrusions BS HP30 6082 Plate BS HT30 6082 Tube BS HG30 6082 Wire BS HS30 6082 Sheet |
AMS 4056 5083-0 Sheet and Plate | QQ-A-200/4 5083 Extruded bar, tube QQ-A-250/6 5083 Sheet and Plate |
Werkstoff 3.3547 | AlMg4.5Mn A-G4.5MC |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||
| Weight % | Al | Si | Fe | Cu | Mn | Cr | Mg | Zn | Ti | Other Each | Others Total |
| 6082 | Bal | 0.7 - 1.3 | 0.50 max | 0.10 max | 0.40-1.00 | 0.25 max | 0.06-1.20 | 0.20 max | 0.10 max | 0.05 max | 0.15 max |
Typical Mechanical Properties 01
| Material | Temp | Thickness | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation |
| Alloy 7050 Plate (longitudinal) | T7451 | <2.0 | 74 | 64 | 10 |
| Alloy 7050 Plate (longitudinal) | T7451 | 2.0 -3.0 | 73 | 63 | 9 |
| Alloy 7050 Plate (longitudinal) | T7451 | 3.0 - 4.0 | 72 | 62 | 9 |
| Alloy 7050 Plate (longitudinal) | T7451 | 4.0 - 5.0 | 71 | 61 | 9 |
| Alloy 7050 Plate (longitudinal) | T7651 | 0.25 - 1.0 | 76 | 66 | 9 |
| Alloy 7050 Plate (longitudinal) | T7651 | 1.0 - 1.5 | 77 | 67 | 9 |
| Alloy 7050 Plate (longitudinal) | T7651 | 1.5 - 2.0 | 76 | 66 | 9 |
| Alloy 7050 Plate (longitudinal) | T7651 | 2.0 - 3.0 | 76 | 66 | 8 |
Typical Mechanical Properties 02
| Material | Temper | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation |
| Alloy 7050 Bar (AMS 4340) | T76511 | 79 | 69 | 7 |
| Alloy 7050 Bar (AMS 4340) | T73511 | 70 | 60 | 8 |
| Alloy 7050 Bar (AMS 4342) | T74511 | 73 | 63 | 7 |
Analysis Of Titanium Alloys
| Alloy Composition (ASTM Grade) [Common Name] | Alloy Description | Available Product Forms | Typical Applications |
|---|---|---|---|
| Ti Grade 1 | Lower strength, softest, unalloyed Ti grade with highest ductility, cold formability, and impact toughness, with excellent resistance to mildly reducing to highly oxidizing media with or without chlorides and high weldability. | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe, Wire* | AC, CG, CP, DS, HE, HR, FP, MI, PB, NS |
| Ti Grade 2 | Moderate strength unalloyed Ti with excellent weldability, cold formability, and fabricability; "workhorse" and "garden variety" Ti grade for industrial service with excellent resistance to mildly reducing to highly oxidizing media with or without chlorides. Approved for sour service use under the NACE MR-01-75 Standard. | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe, Seamless Tubing*, Wire*, Foil* | AC, AD, AP, AR, CG, CP, DS, FP, HE HR, MI, NS, PB, PP, OP, SR |
| Ti Grade 3 | Slightly stronger version of Gr. 2 Ti with similar corrosion resistance with good weldability and reasonable cold formability/ductility. | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe | CP, NS, PP |
| Ti Grade 4 | Much stronger, high interstitial version of Grades 2 and 3 Ti with reasonable weldability, and reduced ductility and cold-formability. | Ingot/Bloom, Bar*, Billet, Plate, Strip | AC, AD, CP |
| Ti-0.15Pd [Ti-Pd] (Grade 7) | Most resistant Ti alloy to corrosion in reducing acids and localized attack in hot halide media, with physical, mechanical, formability properties equivalent to Gr. 2 Ti, and excellent weldability/fabricability. | Ingot/Bloom, Bar*, Billet, Plate, Strip, Tubing, Welded Pipe, Wire* | AC, AP, CP, DS, HE, PB |
| Ti-0.15Pd (Grade 11) | Most resistant Ti alloy to corrosion in reducing acids and localized attack in hot halide media, with physical, mechanical, formability properties equivalent to Gr. 1 Ti (soft grade) and excellent weldability. | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe, Wire* | AC, CP, DS, HE, HR, PB |
| Ti-0.05Pd (Grade 16) | Lower cost, leaner Pd version of Ti Gr. 7 with equivalent physical/mechanical properties, and similar corrosion resistance.Tubing, Welded Pipe | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe, Wire* | AC, AP, CP, DS, HE, HR, PB |
| Ti-0.05Pd (Grade 17) | Lower cost, leaner Pd version of Ti Gr. 11 with equivalent physical/mechanical properties and fabricability (soft grade) and similar corrosion resistance. Tubing, Welded Pipe | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe, Wire* | AC, CP, DS, HE, HR, PB |
| Ti-0.1Ru [TiRu-26®] (Grade 26) | Lower cost, Ru-containing alternative for Ti Gr. 7 with equivalent physical/mechanical properties and fabricability and similar corrosion resistance. Tubing, Welded Pipe | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe, Wire* | AC, AP, CP, DS, HE, HR, PB |
| Ti-0.1Ru [TiRu-27®] (Grade 27) | Lower cost, Ru-containing alternative for Ti Gr. 11 with equivalent physical/mechanical properties (soft grade) and fabricability and similar corrosion resistance. | Ingot/Bloom, Bar*, Billet, Plate, Strip, Welded Tubing, Welded Pipe | AC, CP, DS, HE, HR, PB |
| Ti-0.3Mo-0.8Ni [Ti-12] (Grade 12) | Highly weldable and fabricable Ti alloy offering improved strength and pressure code design allowables, hot brine crevice corrosion, and reducing acid resistance compared to Ti Grades 1, 2, and 3. Approved for sour service use under the NACE MR-01-75 Standard. | Ingot/Bloom, Billet, Welded Pipe, Plate, Strip, Welded Tubing, Seamless Pipe, Wire* | CP, DS, GB, HE, HR, OP |
| Ti-3Al-2.5V [Ti-3-2.5] (Grade 9) | Medium strength, non-ageable Ti alloy offering highest strength and design allowables under the pressure vessel code, with good weldability and cold fabricability for mildly reducing to mildly oxidizing media. | Ingot/Bloom, Billet, Welded Pipe, Plate, Strip, Welded Tubing, Foil* Seamless Tubing*, Wire* | AD, CG, NS, SR |
| Ti-3Al-2.5V-Pd [Ti-3-2.5-Pd] (Grade 18) | Pd-enhanced version of Ti-3Al-2.5V with equivalent physical and mechanical properties and fabricability, offering elevated resistance to dilute reducing acids and crevice corrosion in hot halide (brine) media. | Ingot/Bloom, Billet, Welded Pipe, Plate, Strip, Welded Tubing, Seamless Pipe | CP, GB, HE, OP, PD |
| Ti-3Al-2.5V-Ru [Ti-3-2.5-Ru] (Grade 28) | Ru-enhanced version of Ti-3Al-2.5V with equivalent physical and mechanical properties and fabricability, offering elevated resistance to dilute reducing acids and crevice corrosion in hot halide (brine) media. Approved for sour service use under the NACE MR-01-75 Standard. | Ingot/Bloom, Billet, Welded Pipe, Plate, Strip, Welded Tubing, Seamless Pipe, Wire* | CP, GB, HE, OP, PD |
| Ti-5Al-2.5Sn [Ti-5-2.5] (Grade 6) | Weldable, non-ageable, high-strength alloy offering good high temperature stability, strength, oxidation and creep resistance. | Ingot/Bloom, Bar*, Billet, Sheet | GT |
| Ti-5Al-2.5Sn ELI [Ti-5-2.5 ELI] | Extra low interstitial version of Ti-5Al-2.5Sn exhibiting an excellent combination of toughness and strength at cryogenic temperatures; suited for cryogenic vessels for service as low as -255°C. | Ingot/Bloom, Bar*, Billet, | SS |
| Ti-8Al-1Mo-1V [Ti-8-1-1] | Highly creep-resistant, non-ageable, weldable, high-strength Ti alloy for use up to 455°C; exhibiting the lowest density and highest modulus of all commercial Ti alloys. | Ingot/Bloom, Bar*, Billet, Sheet | GT |
| Ti-6Al-2Sn-4Zr-2Mo-0.1Si [[Ti-6-2-4-2-S] | Weldable, high strength Ti alloy offering excellent strength, stability, and creep resistance to temperatures as high as 550°C. | Ingot/Bloom, Bar*, Billet, Sheet | AF, AU, GT |
| Alloy Composition (ASTM Grade) [Common Name] | Alloy Description | Available Product Forms | Typical Applications |
|---|---|---|---|
| Ti-6Al-4V [Ti-6-4] (Grade 5) | Heat treatable, high-strength, most commercially available Ti alloy ("workhorse" alloy for aerospace applications), for use up to 400Ã�°C offering an excellent combination of high strength, toughness, and ductility along with good weldability and fabricability. | Ingot/Bloom, Bar*, Billet, Plate, Sheet, Seamless Pipe, Wire*, Seamless Tubing*, Foil* | AD, AF, AU, BA, CG, GT, HE, LG, NS, PD, SR, SS |
| Ti-6Al-4V ELI [Ti-6-4 ELI] (Grade 23) | Extra low interstitial version of Ti-6Al-4V offering improved ductility and fracture toughness in air and saltwater environments, along with excellent toughness, strength, and ductility in cryogenic service as low as -255Ã�°C. Typically used in a non-aged condition for maximum toughness. | Ingot/Bloom, Bar*, Billet, Plate, Sheet, Wire*, Seamless Tubing*, Foil* | AF, MI, BA, NS, OP, SS |
| Ti-6Al-4V-0.1Ru [Ti-6-4-Ru](Grade 29) | Extra low interstitial, Ru-containing version of Ti-6Al-4V offering improved fracture toughness in air, seawater, and brines, along with resistance to localized corrosion in sweet and sour acidic brines as high as 330Ã�°C. Approved for sour service use under the NACE MR-01-75 Standard. | Ingot/Bloom, Bar*, Billet, Plate, Sheet, Seamless Pipe, Wire* | CP, DS, GB, OP, PD |
| Ti-6Al-7Nb | High strength Ti alloy with good toughness and ductility, used primarily for medical implants stemming from its excellent biocompatibility. | Ingot/Bloom, Bar*, Billet, Wire* | MI |
| Ti-6Al-6V-2Sn [Ti-6-6-2] | Heat-treatable, high-strength Ti alloy with higher strength and section hardenability than Ti-6Al-4V, but with lower toughness and ductility, and limited weldability. Can be used in mill annealed or in the aged (very high strength) condition. | Ingot/Bloom, Bar*, Billet, Plate, Sheet | AF |
| Ti-6Al-2Sn-4Zr-6Mo [Ti-6-2-4-6] | Heat-treatable, deep-hardenable, very high strength Ti alloy with improved strength to temperatures as high as 450°C, with limited weldability. Approved for sour service under the NACE MR-01-75 Standard. | Ingot/Bloom, Bar*, Billet | GT |
| Ti-4Al-4Mo-2Sn-0.5Si [Ti-550] | Heat-treatable, high strength forging alloy with good strength and creep resistance to temperatures as high as 400°C. | Ingot/Bloom, Bar*, Billet | GT |
| Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.15Si [Ti-6-22-22] | Heat-treatable, high strength Ti alloy with strength and fracture toughness-to-strength properties superior to those of Ti-6Al-4V, with excellent superplastic formability and thermal stability. | Ingot/Bloom, Bar*, Billet, Plate, Sheet, Wire* | AF, SS |
| Ti-4.5Al-3V-2Mo-2Fe [SP-700] Â | Heat-treatable, high strength Ti alloy with superior strength and exceptional hot and superplastic formability compared to Ti-6Al-4V, combined with good ductility and fatigue resistance. | Ingot/Bloom, Bar*, Billet, Plate, Sheet | AF, CG, GT, SR, SS |
| Ti-5Al-4Cr-4Mo-2Sn-2Zr [Ti-17] | Heat-treatable, deep section hardenable, very high strength Ti alloy with superior strength and creep resistance over Ti-6Al-4V to temperatures as high as 400Ã�°C, and limited weldability. | Ingot/Bloom, Bar*, Billet | GT |
| Ti-10V-2Fe-3Al [Ti-10-2-3] | Heat-treatable, deep hardenable, very high strength Ti alloy possessing superior fatigue and strength/toughness combinations, with exceptional hot-die forgeability, but limited weldability. | Ingot/Bloom, Bar*, Billet | AF, LG |
| Ti-3Al-8V-6Cr-4Zr-4Mo [Ti Beta-C] (Grade 19) | A heat-treatable, deep section hardenable, very high strength Ti alloy possessing good toughness/strength properties, low elastic modulus and elevated resistance to stress and localized corrosion in high temperature sweet and sour brines. Approved for sour service under the NACE MR-01-75 Standard. | Ingot/Bloom, Bar*, Billet, Seamless Pipe, Wire* | GB, LG, NS, PD, SS |
| Ti-3Al-8V-6Cr-4Zr- 4Mo-0.05Pd [Ti Beta-C/Pd] (Grade 20) | A Pd-containing version of the Ti-38644 alloy (Beta-C/Pd) possessing equivalent physical/mechanical properties, but with significantly enhanced resistance to stress and localized corrosion in high temperature brines. | Ingot/Bloom, Bar*, Billet, Seamless Pipe | GB, NS, PD |
Types of Hastelloy Alloy B/B2 bars we stock:
Application of Hastelloy Alloy B/B2 round bars:
Chemical processes, Vacuum furnaces, Mechanical components in reducing environments
The company shares glorious credentials with the eminent Manufacturers, Suppliers and Exporters of Nickel Alloy (UNS N02200). It manufactured using advanced production facilities at our in-house manufacturing unit. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the alloy in our state-of-the-art warehouse. One can obtain Nickel Alloy at market-leading prices from us.
Chemical Analysis
| C | .15 max |
|---|---|
| MN | .35 max |
| P | - |
| S | .01 max |
| Si | .35 max |
| Cr | - |
| Ni | 99.0 min |
| Mo | - |
| Cu | .25 max |
| Co | - |
| Cb+Ta | - |
| Ti | - |
| Al | - |
| Fe | .40 max |
Specifications
| International Specifications | BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11 DIN 17740, 17750, 17751, 17752, 17753, 17754 Werkstoff Nr. 2.4060, 2.4066 |
|---|---|
| Sheet/Plate | ASME SB-168 |
| Round Bar/Wire | ASME SB-160 |
| Pipe | ASME SB-161, ASME SB-829, ASME SB-775, ASME SB-725 |
| Tube | ASME SB-161, ASME SB-163, ASME SB-730, ASME SB-751 |
| Fittings | ASME SB-366 |
| Forgings | ASME SB-564 |
| Respected trademarks are of their respected owners | |
Leveraging on our rich industry experience, we are enlisted among the trusted Manufacturers, Suppliers and Exporters of Nickel Alloy (UNS N02201). The Nickel Alloy offered by us is manufactured in compliance with set industrial norms. Buyers ar free to place bulk orders of the alloys with us and we ensure their timely execution within the allocated timeframe. The entire range of the alloys is reasonably priced by us.
Chemical Analysis
| C | .02 max |
|---|---|
| MN | .35 max |
| P | - |
| S | .01 max |
| Si | .35 max |
| Cr | - |
| Ni | 99.0 min |
| Mo | - |
| Cu | .25 max |
| Co | - |
| Cb+Ta | - |
| Ti | - |
| Al | - |
| Fe | .40 max |
Specifications
| International Specifications | BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11 DIN 17740, 17750, 17751, 17752, 17753, 17754 Werkstoff Nr. 2.4060, 2.4066 |
|---|---|
| Sheet/Plate | ASME SB-168, AMS 553 |
| Round Bar/Wire | ASME SB-160 |
| Pipe | ASME SB-161, ASME SB-829, ASME SB-775, ASME SB-725 |
| Tube | ASME SB-161, ASME SB-163, ASME SB-730, ASME SB-751 |
| Fittings | ASME SB-366 |
| Forgings | ASME SB-564 |
| Respected trademarks are of their respected owners | |
Ti Grade 1 is the softest titanium with the highest ductility, good cold formability which gives Ti Grade 1 an excellent resistance from mild to high oxidization. This Titanium Alloy Grade 1 is available in diverse forms to suit the varied needs of the clients. We Export Titanium Alloy to Iran, Kuwait, Qatar, UAE, Turkey, Greece, Chile, Czech Republic and Brazil.
Range : Titanium Grade 1 Coils, Titanium Grade 1 Strips, Titanium Grade 1 Fasteners, Titanium Grade 1 Fittings, Titanium Grade 1 Forgings, Titanium Grade 1 Pipes, Titanium Grade 1 Plates, Titanium Grade 1 Round Bars, Titanium Grade 1 Sheets, Titanium Grade 1 Square Bars, Titanium Grade 1 Threaded Bars / Rods, Titanium Grade 1 Tubing
Chemical composition of Titanium Alloy grade 1 Strips and Sheets :
Availability
These products are manufactured according to ASME, AMS, DIN and GB standards
Chemical Analysis
| C | .08 max |
|---|---|
| N | .03 max |
| O | .18 max |
| H | .015 max |
| Si | - |
| Cr | - |
| Ni | - |
| Mo | - |
| Cu | - |
| Co | - |
| Cb+Ta | - |
| Ti | Bal |
| Al | - |
| Fe | .20 max |
| Nb | - |
Specifications
| Sheet/Plate | ASME SB-265 |
|---|---|
| Round Bar/Wire | ASME SB-348 ASTM F-67 |
| Pipe | ASME SB-337, ASME SB-338 |
| Tube | ASME SB-337, ASME SB-338 |
| Fittings | ASME SB-363 |
| Forgings | ASME SB-381 |
Having excellent cold formability and welding capacity, this Titanium Alloy Grade 2 is the best suited for works requiring excellent resistance to high oxidization. We offer this Titanium Alloy Grade 2 in diverse forms to suit different needs of the clients. We are a credible name, offering class Titanium Alloy Grade 2 at competitive rates. We Export Titanium Alloy to Iran, Kuwait, Qatar, UAE, Turkey, Greece, Chile, Czech Republic and Brazil.
Range : Titanium Grade 2 Coils, Titanium Grade 2 Strips, Titanium Grade 2 Fasteners, Titanium Grade 2 Fittings, Titanium Grade 2 Forgings, Titanium Grade 2 Pipes, Titanium Grade 2 Plates, Titanium Grade 2 Round Bars, Titanium Grade 2 Sheets, Titanium Grade 2 Square Bars, Titanium Grade 2 Threaded Bars / Rods, Titanium Grade 2 Tubing
Chemical composition of Titanium Alloy grade 2 Strips and Sheets :
Availability
These products are designed according to ASME, AMS, DIN and GB standards
Chemical Analysis
| C | .08 max |
|---|---|
| N | .03 max |
| O | .25 max |
| H | .015 max |
| Si | - |
| Cr | - |
| Ni | - |
| Mo | - |
| Cu | - |
| Co | - |
| Cb+Ta | - |
| Ti | - |
| Al | - |
| Fe | .30 max |
| Nb | - |
Specifications
| Sheet/Plate | ASME SB-265 AMS 4902 |
|---|---|
| Round Bar/Wire | ASME SB-348 ASTM F-67 AMS 4921 |
| Pipe | ASME SB-337, ASME SB-338 |
| Tube | ASME SB-337, ASME SB-338 AMS 4942 |
| Fittings | ASME SB-363 |
| Forgings | ASME SB-381 |
This Titanium Alloy Grade 5(Ti -6Al-4V) is heat treatable and has high strength and ductility along with good weldability and fabricability. We offer this Titanium Alloy Grade 5 in diverse forms of products, suiting the specific needs of the clients. This Titanium Alloy Grade 5 is manufactured as per the set industrial standards such as ASME, DIN, GB, AMS, etc. We Export Titanium Alloy to Iran, Kuwait, Qatar, UAE, Turkey, Greece, Chile, Czech Republic and Brazil.
Range : Titanium Grade 5 Coils, Titanium Grade 5 Strips, Titanium Grade 5 Fasteners, Titanium Grade 5 Fittings, Titanium Grade 5 Forgings, Titanium Grade 5 Pipes, Titanium Grade 5 Plates, Titanium Grade 5 Round Bars, Titanium Grade 5 Sheets, Titanium Grade 5 Square Bars, Titanium Grade 5 Threaded Bars / Rods, Titanium Grade 5 Tubing
Chemical composition of Titanium Alloy grade 5 Strips and Sheets :
Titanium Alloy Grade 5 Available In The Form Of :
Chemical Analysis
| C | .08 max |
|---|---|
| N | .05 max |
| O | .20 max |
| H | .0125 max |
| Si | - |
| Cr | - |
| Ni | - |
| Mo | - |
| Cu | - |
| Co | - |
| V | 3.50 - 4.50 |
| Ti | 5.50 - 6.75 |
| Al | - |
| Fe | .25 max |
| Nb | - |
Specifications
| Sheet/Plate | ASME SB-265 AMS 4911 |
|---|---|
| Round Bar/Wire | ASME SB-348 AMS 4928, AMS 4965, AMS 4967 |
| Pipe | - |
| Tube | - |
| Fittings | - |
| Forgings | MIL-T-9046, MIL-T-9047 |
Hastelloy C276 Round Bar, UNS N10276 as per ASTM B574 also knows as Alloy C276, Nickel Alloy 276, Inconel 276 is resistant to the formation of grain boundary precipitates in the weld heat-affected zone. Hastelloy alloy C276 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas. Nickel Alloy C276 and Hastelloy C276, is generally considered the most versatile corrosion resistant alloy available, and comprised of nickel, molybdenum, chromium, iron and tungsten. These elements combined results outstanding corrosion resistant properties particularly crevice and pitting, allowing for its use in a broad range of corrosive environments. It displays tremendous resistance to many acids, including sulphuric, acetic, phosphoric, formic, nitric, hydrochloric, and hydrofluoric compounds, which is why it is so popular in chemical and food processing environments including strong oxidizers. Buyers can purchase Hastelloy C276 Round Bars in a range of sizes and grades from us.
Get in touch with us to buy Hastelloy C276 Sheets and Plates, which are available in thicknesses ranging from 0.025mm to 50mm. Hastelloy C276 Sheets and Plates are commonly used in Flue Gas Desulfurization (FGD) applications for scrubbers, dampers and ducts. Harsh Steel regularly supplies Hastelloy alloy 276 Sheets and Plates as per requirements to various clients across the world. We are one-stop destination for all those looking for Hastelloy C276 Manufacturer, Supplier or Exporter of Strips, Sheets and Plates.
Available :
We deal in Inconel Alloy 600 Sheets and Plates that are designed and finished to perfection. Alloy 600 is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000°F (1093°C). It is non-magnetic and is easily welded. It is used in various corrosion-resisting applications. The high nickel content of the material provides exceptional resistance to chloride stress corrosion cracking. Nickel Alloy 600 exhibits resistance to corrosion and heat, possesses high strength and good workability conditions. It is used majorly in chemical based industries, as well as in the aerospace electronics and nuclear industries. Alloy 600 is a nickel-base alloy with excellent carburization and good oxidation resistance at elevated temperatures. Alloy 600 has resistance to dry Cl2 and HCL gases at moderately high temperatures. Alloy 600 is not suggested for use at red heat where sulphur is present due to high nickel quantities. We can make available the Inconel Alloy 600 Sheets and Plates in different sizes and shapes for various industrial requirements.
Inconel Alloy 625 is a nonmagnetic, corrosion and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093oC) are derived primarily from the solid solution effects of the refractory metal such as columbium and molybdenum in a nickel-chromium matrix. The alloy has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Some typical applications for Alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications. We at Harsh Steel are a Stockholder & Distributor of Inconel Alloy 625 Sheets and Plates. Inconel Alloy 625 is a nickel-chromium-molybdenum alloy with an addition of niobium that interacts with the molybdenum to tighten the alloys matrix and thereby provides high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Available in plate and sheet forms. INCONEL 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. It is highly resistant to a wide range of organic and mineral acids, and also has good high temperature strength. It is a favorable choice for seawater applications. They are marine and aerospace industries, chemical processing, nuclear reactors and pollution control equipment.
617 Plate Inconel Alloy is a combination of nickel, chromium, cobalt and molybdenum, which has various properties. These alloy plates are resistant to high temperature, corrosion and forms of oxidation. These alloy plates are mostly used for making air craft materials. 617 Plate Inconel Alloy is highly durable in nature and has a good tensile strength.
More about 617 Plate Inconel Alloy :
Inconel alloy 617 is supplied by Harsh Steel in Form of Sheets, Plates and Round bars in annealed condition. Inconel alloy 617 is supplied as per UNS N06617 ASTM B 166, WS 2.4663A, ASME SB-166, Boiler Code Sections I, VIII, SAE AMS 5887, SAE AMS 5888 and SAE AMS 5889. Inconel alloy 617 nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of metallurgical stability, strength, and oxidation resistance at high temperatures. Especially useful at temperatures in excess of 1800 Degrees F.
Chemical composition for Inconel alloy 617 Sheets, Plates, Pipes, Fittings, Flanges and Fasteners :
Additional Information:
Packaging Details : As per your terms
Nimonic Alloy 75 round bars UNS S06075 WR. NO 2.4951 contain Chromium 18.00-21.00% Manganese 1.00% max, Nickel balance, Silicon 1.00% max, Carbon 0.5% max, titanium 02-06% which is commonly used in various daily applications such as sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering. Nimonic Alloy 75 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Nimonic Alloy 75 round bars along in types of Nimonic Alloy 75 bright round bars, Nimonic Alloy 75 hexagonal bars, Nimonic Alloy 75 square bars, Nimonic Alloy 75 hex bars, Nimonic Alloy 75 flat bars, Nimonic Alloy 75 threaded bars and Nimonic Alloy 75 forged bars. All the Nimonic Alloy 75 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export Nimonic Alloy 75 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Nimonic Alloy 75 bars we stock:
Application of Nimonic Alloy 75 round bars:
Sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.
At Harsh Steel Nickel Alloy 600 is available in Nickel Alloy 600 wire, Nickel 600 Round bar, Nickel 600 Forged bar, Nickel 600 hex bar, Nickel 600 Flat bar, Nickel 600 Circles, Nickel 600 Ring, Nickel 600 Tube, Nickel 600 seamless Pipe, Nickel 600 Welded / ERW Pipe, Nicke 600 Sheet, Nickel 600 Plate, Nickel 600 Coil, Nickel 600 Flanges, Nickel 600 fasteners, Nickel 600 Socket weld Fittings, Nickel 600 ferrule fittings, Nickel 600 Buttweld fittings Like cap, elbow, tee, Reducer.
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy had been created for service temperatures via cryogenic to raised conditions within the choice of 2000° F. It's non-magnetic, has excellent physical qualities and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 makes it possible for the idea to hold on to extensive resistance beneath decreasing circumstances, causes it to become immune to deterioration by means of a number of natural and organic and inorganic compounds, presents the idea excellent resistance to chloride-ion stress-corrosion great plus offers excellent resistance to alkaline remedies. Normal programs of the dime mix add some chemical, pulp and paper, aerospace, nuclear anatomist and high temperature healing industries.
Nickel Alloy 600 (N06600) is a nickel-chromium-iron alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking corrosion by high-purity water, and caustic corrosion. Alloy 600 also has excellent mechanical properties and has a desirable combination of high strength and good workability. Used for furnace components, in chemical and food processing, in nuclear engineering and for the sparking electrodes.
In what form is Inconel 600 Available at Harsh Steel?
What are the characteristics of Inconel 600?
Specifications
Stock Availability Of Contact Sales
| Alloy Name | Trade Name | UNS No. | British Specs | American Specs | German Specs | French Specs |
| Nickel Alloy 600 | Inconel 600 | UNS N06600 | BS 3072 BS 3073 BS 3074 BS 3075 BS 3076 NA14 |
AMS 5580 (Tube *) AMS 5540 Sheet, Strip and Plate AMS 5665 Bar and Forgings AMS 5687 Wire QQ-W-390 |
Werkstoff 2.4816 | AFNOR NC15Fe |
Technical Data Sheet
| Chemical Composition Limits | ||||||||
| Weight% | C | S | Cr | Cu | Mn | Si | Ni | Fe |
| Nickel Alloy 600 | 0.15 max | 0.015 max | 14.0-17.0 | 0.50 max | 1.0 max | 0.50 max | 72.0 min | 43626 |
Typical Mechanical Properties
| Material | Form and Condition | Tensile Strength | Yield Strength (0.2% Offset) | Elongation(%) | Hardness, Rockwell | ||
| ksi | MPa | ksi | MPa | ||||
| Nickel Alloy 600 rod and bar | Cold drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 65-85B |
| Nickel Alloy 600 Plate | Hot rolled Annealed | 80-100 | 550-725 | 30-50 | 205-345 | 55-35 | 65-85B |
| Nickel lloy 600 Sheet | Cold Rolled Annealed | 80-100 | 550-690 | 30-45 | 205-310 | 55-35 | 88B max |
| Nickel Alloy 600 Tube and Pipe | Cold Drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 88B max |
| Nickel Alloy 600 Wire | Cold Drawn Annealed | 80-120 | 550-830 | 35-75 | 240-520 | 45-20 | - |
| Nickel Alloy 600 Wire | Cold Drawn No 1 Temper | 105-135 | 725-930 | 70-105 | 480-725 | 35-15 | - |
| Nickel Alloy 600 Wire | Spring Temper | 170-220 | 1170-1520 | 150-210 | 1035-1450 | 05/02/19 | - |
At Harsh Steel Nickel Alloy 625 (UNS N06625) is available in Inconel 625 wire, Inconel 625 Round bar, Inconel 625 Forged bar, Inconel 625 hex bar, Inconel 625 Flat bar, Inconel 625 Circles, Inconel 625 Ring, Inconel 625 Tube, Inconel 625 seamless Pipe, Inconel 625 Welded / ERW Pipe, Inconel 625 Sheet, Inconel 625 Plate, Inconel 625 Coil, Inconel 625 Flanges, Inconel 625 fasteners, Inconel 625 Socket weld Fittings, Inconel 625 ferrule fittings, Inconel 625 Buttweld fittings Like cap, elbow, tee, Reducer.
Inconel 625 is a consumption and oxidation safe nickel alloy that is utilized both for its high quality and remarkable aqueous erosion safety. Its outstanding quality and durability is because of the expansion of niobium which acts with the molybdenum to solidify the composite's network. Alloy 625 has excellent quality and anxiety consumption splitting resistance to chloride particles. This nickel alloy has superb weldability and is often used to weld AL-6xn. This alloy resists an extensive variety of seriously destructive situations and is especially resistant to setting and hole consumption. Some normal applications Inconel 625 is utilized within are synthetic preparing, aerospace and marine designing, contamination control equipment, and nuclear reactors.
Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium. The addition of molybdenum acts with the niobium to stiffen the alloy matrix, providing a high strength without a strengthening heat treatment. The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. Alloy 625 is used in chemical processing, aerospace and marine engineering oil & gas, pollution control equipment and nuclear reactors.
In what form is Inconel 625 available at Harsh Steel?
What are the characteristics of Inconel 625?
Stock Availability Of Contact Sales
| Alloy Name | Trade Name | UNS No. | British Specs | American Specs | German Specs | French Specs |
| Nickel Alloy 625 | Inconel 625 | UNS N06625 | BS 3072 BS 3073 BS 3074 BS 3075 BS 3076 NA21 |
AMS 5581 Tube AMS 5599 Sheet, Strip and Plate AMS 5666 Bar, Forgings AMS 5869 Sheet, Strip and Plate AMS 5879 Sheet, Strip and Foil AMS 5837 Welding Wire |
Werkstoff 2.4856 | AFNOR NC22DNb |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||||
| Weight% | Ni | Cr | Mo | Nb + Ta | Fe | Ti | C | Mn | Si | S | P | Al | Co |
| Nickel Alloy 625 | 58.0 min | 20 - 23 | 43687 | 3.15 -4.15 | 5.0 max | 0.40 max | 0.10 max | 0.50 max | 0.50 max | 0.15 max | 0.15 max | 0.40 max | 1.0 max |
Typical Mechanical Properties
| Material | Form and Condition | Tensile Strength | Yield Strength (0.2% Offset) MPa | Elongation 4D(%) | Hardness | ||
| ksi | MPa | ksi | MPa | ||||
| Nickel Alloy 625 Bar | Annealed | 120 | 827 | 60 | 414 | 30 | ≤ 287 HB |
| Nickel Alloy 625 Sheet | Annealed | 120 | 827 | 60 | 414 | 30 | 145-240 |
| Nickel Alloy 625 Tube Seamless and Welded | Annealed | 120 | 827 | 60 | 414 | 30 | - |
At Harsh Steel Nickel 718 (UNS N07718) is available in Inconel 718 wire, Inconel 718 Round bar, Inconel 718 Forged bar, Inconel 718 hex bar, Inconel 718 Flat bar, Inconel 718 Circles, Inconel 718 Ring, Inconel 718 Tube, Inconel 718 Seamless Pipe, Inconel 718 Welded / ERW Pipe, Inconel 718 Sheet, Inconel 718 Plate, Inconel 718 Coil, Inconel 718 Flanges, Inconel 718 fasteners, Inconel 718 Socket weld Fittings, Inconel 718 ferrule fittings, Inconel 718 Buttweld fittings Like cap, elbow, tee, Reducer.
Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718's composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy's matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.
In what forms is Alloy 718 (UNS N07718, W Nr 2.4668) is an austenitic nickel-based superalloy. Alloy 718 exhibits excellent high yield tensile and creep-rupture properties at temperatures up to 1300ºF and oxidation resistance to 1800ºF. Alloy 718 is used in applications that require high strength such as parts for jet engines and high speed airframe parts such as wheels, buckets, spacers and high temperature bolts and fasteners.
Inconel 718 Available at Harsh Steel?
What are the characteristics of Inconel 718?
Typical Mechanical Properties
There are two main types of solution annealed and aging treatments:
Specifications
Stock Availability Of Contact Sales
| Alloy Name | Trade Name | UNS No. | American Specs | German Specs |
| Nickel Alloy 718 | Inconel 718 | UNS N07718 | AMS 5662 Bar and Forgings AMS 5663 Bar and Forgings AMS 5664 Bar and Forgings AMS 5589 Seamless Tube AMS 5590 (Tube *) AMS 5596 Sheet, Strip and Plate AMS 5597 Sheet, Strip and Plate AMS 5832 Welding Wire AMS 5914 Sheet, Strip and Foil AMS 5950 (718SPF) Sheet & Strip |
Werkstoff 2.4668 |
Technical Data Sheet
| Chemical Composition Limits | ||||||||||||||||
| Weight% | C | Mn | P | S | Si | Cr | Ni | Mo | Cb | Ta | Ti | Al | Co | B | Cu | Fe |
| Inconel 718 AMS 5662 | 0.08 | 0.35 | 0.015 | 0.015 | 0.35 | 17-21 | 50-55 | 2.8-3.30 | 4.75-5.50 | 0.05 | 0.65-1.15 | 0.20-0.80 | 1 | 0.006 | 0.3 | Rem |
Typical Mechanical Properties 01
| Material | Condition | Tensile Strength ksi | Yield Strength ksi | Elongation 4D | Reduction of Area % | Hardness |
| AMS 5662 Bar | 1700-1850°F Anneal | - | - | - | - | ≤ 277 HB |
| AMS 5663 Bar | 1700-1850°F Anneal + Age | 185 | 150 | 12 | 15 | ≥331 HB |
| AMS 5664 Bar | 1900-1950°F Anneal | - | - | - | - | 3" dia 248 HB 3-5" dia 285 HB |
| - | 1900-1950°F Anneal + Age | 180 | 150 | 10 | 12 | ≥341 HB |
Typical Mechanical Properties 02
| Material | Condition | Tensile Strength ksi | Yield Strength ksi | Elongation 4D | Hardness |
| Nickel Alloy 718 Sheet | AMS 5596 < 0.1874" thick | 140 | 80 | 30 | 102 HRB |
| Nickel Alloy 718 Sheet | AMS 5596 Aged < 0.1874" thick | 180 | 150 | 12 | ≥36 HRC |
| Nickel Alloy 718 Sheet | AMS 5597 | 140 | 75 | 30 | ≤ 25 HRC |
| Nickel Alloy 718 Sheet | AMS 5597 + Aged | 180 | 150 | 15 | ≥38 HRC |
At Harsh Steel Nickel 825 is available in Incoloy 825 wire, Incoloy 825 Round bar, Incoloy 825 Forged bar, Incoloy 825 hex bar, Incoloy 825 Flat bar, Incoloy 825 Circles, Incoloy 825 Ring, Incoloy 825 Tube, Incoloy 825 seamless Pipe, Incoloy 825 Welded / ERW Pipe, Incoloy 825 Sheet, Incoloy 825 Plate, Incoloy 825 Coil, Incoloy 825 Flanges, Incoloy 825 fasteners, Incoloy 825 Socket weld Fittings, Incoloy 825 ferrule fittings, Incoloy 825 Buttweld fittings Like cap, elbow, tee, Reducer.
Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.
Alloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localised attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulphuric and phosphoric acid. Alloy 825 is used for chemical processing, pollution control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production and pickling equipment and handling of radioactive wastes.
In what forms is Incoloy 825 available at Harsh Steel?
What are the characteristics of Incoloy 825?
Specifications
Nickel Alloy 825 Pipe and Tube
Nickel Alloy 825 Rod, Bars, Forgings
Other Similar Specifications
Technical Specifications
| Alloy Name | Trade Name | UNS No. | British Specs | American Specs | German Specs |
| Nickel Alloy 825 | Incoloy 825 | UNS N08825 | BS 3072 BS 3073 BS 3074 BS 3075 BS 3076 NA16 |
ASTM B425 ASTM B424 ASTM B163 (Tube *) |
Werkstoff 2.4858 |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||
| Weight% | Ni | Fe | Cr | Mo | Cu | Ti | C | Mn | S | Si | Al |
| Nickel Alloy 825 | 38 - 46 | 22 min | 19.5 - 23.5 | 2.5 - 3.5 | 37626 | 0.6 - 1.2 | 0.05 max | 1 max | 0.03 max | 0.5 max | 0.2 max |
Typical Mechanical Properties
| Material | Form and Condition | Tensile Strength MPa | Yield Strength (0.2% Offset) MPa | Elongation (%) |
| Nickel Alloy 825 Tube | Annealed | 772 | 441 | 36 |
| Nickel Alloy 825 Tube | Cold Drawn | 1000 | 889 | 15 |
| Nickel Alloy 825 Bar | Annealed | 690 | 324 | 45 |
| Nickel Alloy 825 Plate | Annealed | 662 | 338 | 45 |
| Nickel Alloy 825 Sheet | Annealed | 758 | 421 | 39 |
Invar 36 round bars UNS K93600 EN 1.3912 contain Chromium 0.50% min, Manganese 0.06% min, Nickel 35-38%, Silicon 0.35% minimum which is commonly used in various daily applications such as Laser Part Applications, Moulds for Composite Aircraft Parts, Precision Condenser Plates Resonant, Cavities for Radars, Special Joints and Washers, Thermostatic Bimetals. Invar 36 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Invar 36 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Invar 36 round bars along in types of Invar 36 bright round bars, Invar 36 hexagonal bars, Invar 36 square bars, Invar 36 hex bars, Invar 36 flat bars, Invar 36 threaded bars and Invar 36 forged bars. All the Invar 36 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Invar 36 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Invar 36 bars we stock:
Application of Invar 36 round bars:
Laser Part Applications, Moulds for Composite Aircraft Parts, Precision Condenser Plates Resonant, Cavities for Radars, Special Joints and Washers, Thermostatic Bimetals.
Hastelloy Alloy C22 round bars UNS N06022 EN 2.4602 contain Carbon 0.15% max, Manganese 0.50% max, Silicon 0.8% max, Aluminium 0.2% which is commonly used in various daily applications such as Chemical processing, Pulp and paper processing, Oil and gas, Pesticide production, Pollution control, Sour gas services, Waste incinerators. Alloy C22 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy C22 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy C22 round bars along in types of Hastelloy Alloy C22 bright round bars, Hastelloy Alloy C22 hexagonal bars, Hastelloy Alloy C22 square bars, Hastelloy Alloy C22 hex bars, Hastelloy Alloy C22 flat bars, Hastelloy Alloy C22 threaded bars and Hastelloy Alloy C22 forged bars. All the Hastelloy Alloy C22 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy C22 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Hastelloy Alloy C22 bars we stock:
Application of Hastelloy Alloy C22 round bars:
Chemical processing, Pulp and paper processing, Oil and gas, Pesticide production, Pollution control, Sour gas services, Waste incinerators.
Hastelloy Alloy C276 round bars UNS N10276 EN 2.4819 contain Chromium 14.5-16.5%, Manganese 1.0% max, Carbon 0.01%, Silicon 0.8% maximum which is commonly used in various daily applications such as Almost anything used around sulphuric acid (heat exchangers, evaporators, filters, and mixers), Bleach plants and digesters for the, manufacturing of paper and pulp, Components used around sour gas, Marine engineering, Waste treatment, Pollution control. Alloy C276 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy C276 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy C276 round bars along in types of Hastelloy Alloy C276 bright round bars, Hastelloy Alloy C276 hexagonal bars, Hastelloy Alloy C276 square bars, Hastelloy Alloy C276 hex bars, Hastelloy Alloy C276 flat bars, Hastelloy Alloy C276 threaded bars and Hastelloy Alloy C276 forged bars. All the Hastelloy Alloy C276 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy C276 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Hastelloy Alloy C276 bars we stock:
Application of Hastelloy Alloy C276 round bars:
Almost anything used around sulphuric acid (heat exchangers, evaporators, filters, and mixers), Bleach plants and digesters for the, manufacturing of paper and pulp, Components used around sour gas, Marine engineering, Waste treatment, Pollution control.
Hastelloy Alloy C2000 round bars UNS N06200 EN 2.4675 contain Chromium 23%, molybdenum 16%, Nickel Balance which is commonly used in various daily applications such as chemical and petrochemical processing, in power plants for super-heater and re-heater tubing, in industrial furnaces, and for heat treating equipment. Alloy C2000 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy C2000 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy C2000 round bars along in types of Hastelloy Alloy C2000 bright round bars, Hastelloy Alloy C2000 hexagonal bars, Hastelloy Alloy C2000 square bars, Hastelloy Alloy C2000 hex bars, Hastelloy Alloy C2000 flat bars, Hastelloy Alloy C2000 threaded bars and Hastelloy Alloy C2000 forged bars. All the Hastelloy Alloy C2000 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy C2000 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Hastelloy Alloy C2000 bars we stock:
Application of Hastelloy Alloy C2000 round bars:
Chemical and petrochemical processing, in power plants for super-heater and re-heater tubing, in industrial furnaces, and for heat treating equipment.
Hastelloy Alloy X round bars UNS N06002 EN 2.4665 contain Chromium 20.5-23.0%, Manganese 1.0% max, Carbon 0.05-0.15%, Silicon 0.1% max, Molybdenum 8-10% which is commonly used in various daily applications such as Gas turbine engines, Transition ducts , Combustor cans, Spray bars and flame holders, Afterburners, tailpipes, and cabin heaters, Chemical processing retorts, muffles, and tubing. Alloy X in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy X bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy X round bars along in types of Hastelloy Alloy X bright round bars, Hastelloy Alloy X hexagonal bars, Hastelloy Alloy X square bars, Hastelloy Alloy X hex bars, Hastelloy Alloy X flat bars, Hastelloy Alloy X threaded bars and Hastelloy Alloy X forged bars. All the Hastelloy Alloy X bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy X rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Hastelloy Alloy X bars we stock:
Application of Hastelloy Alloy X round bars:
Gas turbine engines, Transition ducts , Combustor cans, Spray bars and flame holders, Afterburners, tailpipes, and cabin heaters, Chemical processing retorts, muffles, and tubing.
At Harsh Steel Nickel 901 is available in Nimonic 901 wire, Nimonic 901 Round bar, Nimonic 901 Forged bar, Nimonic 901 hex bar, Nimonic 901 Flat bar, Nimonic 901 Circles, Nimonic 901 Ring, Nimonic 901 Tube, Nimonic 901 seamless Pipe, Nimonic 901 Welded / ERW Pipe, Nimonic 901 Sheet, Nimonic 901 Plate, Nimonic 901 Coil, Nimonic 901 Flanges, Nimonic 901 fasteners, Nimonic 901 Socket weld Fittings, Nimonic 901 ferrule fittings, Nimonic 901 Buttweld fittings Like cap, elbow, tee, Reducer.
Alloy 901 is an age-hardenable super alloy which contains Titanium and Aluminium for precipitation hardening and molybdenum for soild-solution strengthening. Alloy 901 has high yield strength and creep resistance at temperatures to about 1110°F (600°C). As Alloy 901 has a substantial iron content it enables alloy 901 to combine strength with good forging characteristics. Alloy 901 is commonly used for gas turbine engine discs, shafts, rings, casings and seals.
Specifications
Stock Availability Of Contact Sales
| Alloy Name | Trade Name | UNS No. | American Specs | German Specs |
| Nickel Alloy 901 | Nimonic 901 Incoloy 901 |
UNS N09901 | AMS 5830 Welding Wire AMS 5660 Bar and Forgings AMS 5661 Bar and Forgings |
Werkstoff 2.4662 |
Typical Mechanical Properties
| Chemical Composition Limits | ||||||||||||
| Weight% | Ni | Cr | Mo | Ti | Co | Cu | Mn | Si | Al | C | S | Fe |
| Nickel Alloy 901 | 42.5 | 12.5 | 5.75 | 2.9 | 1.0 max | 0.5 max | 0.5 max | 0.4 max | 0.35 max | 0.1 max | 0.03 max | Bal |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Sea Worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
