We offer shredder blades. Hvpl manufacture high quality shredder blades. These are highly reckoned among our clients due to their easy installation and trouble free performance. These blades are manufactured by very special grade and hardened to increase its life. Shear blades are specially heat treated for optimum toughness and abrasion resistance to make them highly resistant to damage, impact, vibration, clamping and cutting force.

Shredder blades are made of hard faced, alloy steel (aisi 4140, 4340, en 353, 20mncr5, hchcr d2, d3 etc.)* hardness 60-62hrc* for different applications

applications:
efb shredding
tyres
plastic
aluminium
msw
cloth
bottles
waste reduction
paddy straw
biomass
more according to customer requirement

HVPL manufacture disc brake pads, automotive disc brake pads, magnetic disc brakes pads, asbestos free disc brake pads using premium quality material, modern manufacturing technology and are designed to provide maximum safety under all driving conditions. They are formulated for smooth, clean operations with quiet performance, excellent drum and disc compatibility, good wear resistance, consistent stopping power in all conditions, from the quiet drive in the country to the harsh conditions, of city traffic. Our brake pads offer good and solid all round braking performance. They provide excellent pedal feel regardless of hot or cold braking conditions. Compared to competitors in the same class our disc brake pads offer:

Advanced formulations to deliver increased stopping power
Excellent consistency in braking performance
Application specific shims for lowest noise and longest life
Good noise suppression
Electronic wear sensors where applicable
Excellent comfort characteristics
Very low level of dust
Excellent value for money

Whatever the size of Commercial vehicle you run, from light vans to 42 tons trucks, HVPL have a Brake Pad for you which will increase the life of your brakes and reduce your costs. HVPL will keep the cost of ownership down.

Compared to OE equipment, the cost savings with our brake pads is significant. Whats more you are guaranteed the highest quality. All of our disc pads are approved to Regulation and carry the mark.

The R&D department ongoing research programme has lead to the development of a range of materials which vary in characteristics. All are asbestos free and kind to discs but vary in performance according to their usage:

HVPL have placed great emphasis on testing our prod

We offer brake drum. Hvpl manufactures a wide range of products for heavy duty vehicles trucks, trailers and buses.
brake drums for heavy duty trucks & trailers
brake drums for light commercial vehicles
hubs & spoke wheels
spring and equalizer brackets and shackles
torque arms
rubber bushes
clutch pressure plates
flywheels


manufacturing
sophisticated tool room
pattern designing & casting methodizing
process documentation and sqc
state-of-the-art foundry
high pressure moulding line with flask size 914 x 609 x 355 355
tri-trace induction melting furnace
heavy duty, high production automatic and cnc machines to produce large volumes of components with consistent quality

as per your requirement we can manufacture any kind of automobile components from cast iron, cast steel, s g iron or in m.s too.

We are offering torque rod.
The torque rod has multi-functional role in truck and trailer suspensions. It controls driveline angles of the vehicle, restrains rotation of the axle housing while accelerating and braking, locates the axle and maintain alignment and absorbs leaning & corning forces.
Hvpl torque rods provide lateral support for suspension. They also provide greater stability and roll stiffness as well as keep the axle centered laterally and control axle walk-out on rear suspension.
Hvpls truck torque rods feature longer life, lower cost-per-mile bushings that are easier to install and require no maintenance or grease. The rotating bushings in our torque rods make installation easy and they automatically zero out to ride height. There's no need to worry about marking the bolt hole position when rebushing the rod with hvpl bushings since the pins rotate 360 degrees. Hvpls bushings are chemically resistant to contaminates such as road salt, grease, oil, acidic cleaning solvents, hydraulic fluid and diesel fuel.
All hvpl torque and transverse rods with ratings of 52k and below utilize the hvpl rod design. Hvpl rod is lighter and more compact than conventional rods. The forged construction produces greater structural integrity, while the unique bonded bushing reduces the friction and heat that damages ordinary bushings - providing longer life and greater payload. Hvpl rods are available in one or two piece configurations. Torque rods - longitudinal torque rods help maintain optimum driveline angles by absorbing axle braking and driving torque. This ultimately reduces vibration and helps prolong the life of driveline components. Transverse rods - provide lateral support for hvpl suspensions by transmitting loads directly into the frame, instead of through the suspension. This provides greater stability and roll stiffness as well as keeping the axle centered laterally and controlling axle walkout on walking beam suspensions.

HVPL Brakes one of the leading manufacturer and exporter of brake Lining for Heavy Commercial Vehicles. We specialize in design and Manufacture of High Quality Non- Asbestos Brake Lining for wide range of Trucks, Buses, Trailers and Commercial Vehicles.
Brake linings are a combination of Friction Material. Prior to the mid-1970s, the most common friction materials in use for normal duty were termed Organics. These friction materials usually contained about 30 40 % wt. of organic components and were asbestos base. After mid-1970s, the introduction of front wheel drive vehicles brought about the widespread usage of a new class of friction materials called semimetallics, also called semi Mets and carbon- metallic. Because of the allegedly adverse health effects associated with asbestos fibres, a second new class of friction materials called Non Asbestos Organics (NAOs) came out. In the case of automotive friction materials, the Coeff.of friction is usually found to decrease with increasing unit pressure and sliding speed at a given temperature. For a Fixed amount of braking the amount of wear of automotive friction material tends to remain fairly constant or increase slightly with respect to brake temperature, but once the temperature reaches >200C , the wear increases exponentially with increasing temperature because of thermal degradation of organic components and other chemical changes.
At HVPL in Brake linings Glass fibres, ceramic fibres, acrylic fibres and cellulose fibres are being used in replacement of asbestos as they are more thermally resistant than asbestos.
The methods for producing most friction materials are concerned with the placement of the reinforcement strand or wire within the matrix using some sort of winding operation. Cermet materials are manufactured using the powder metallurgy technique.

HVPL Brake shoes are made of non-asbestos friction material to give finest braking experience equivalent to or better than OE standard. We use specially developed adhesive to ensure proper bonding between the friction material and metal back plate. The brake shoes are welded using projection welding to ensure proper strength between rim and web plate.
HVPL Brake Pad and Brake shoes undergo following inspections:

Friction testing as per SAE J661 Standard
Bonding strength testing between lining and back plate
Hardness Testing
Welding strength testing between rim and web plate of Brake Shoes

We can categorize Brake Shoes as per vehicle requirements depending upon their Friction Material properties Brake Shoes are Organic, Metallic or Ceramic type & Depending upon their Shoes they can be classified as Aluminium casting & fabricated shoe.

We offer shackle pins. Hvpl is a prominent exporter and manufacturers of shackle pins. We are offering shackle pins, which are also called bell crank pins. These shackles pins are prepared with bright bar with grinding and induction hardening. These are normally fitted in assembly lever for heavy vehicles. Shackle pins are available in various designs, colors and sizes.
The pins assembled have been hardened with certain case depth providing higher resistance to wear. Currently a series of shackles and pin assemblies installed with greaseable type of pins have been produced and supplied together with polyurethane bushes for improved product life and heavy duty performance. The entire manufacturing process is completely done in-house thereby ensuring enhanced control over the manufacturing processes to ensure only premium quality products are produced.
The well-equipped qa laboratory has modern testing facilities such as, electronic microscope, digital rockwell and micro-vickers hardness tester, tensile load tester, etc. To ensure only superior quality products are being manufactured and delivered to customers.

We offer shredder blades. Hvpl manufacture high quality shredder blades. These are highly reckoned among our clients due to their easy installation and trouble free performance. These blades are manufactured by very special grade and hardened to increase its life. Shear blades are specially heat treated for optimum toughness and abrasion resistance to make them highly resistant to damage, impact, vibration, clamping and cutting force. Shredder blades are made of hard faced, alloy steel (aisi 4140, 4340, en 353, 20mncr5, hchcr d2, d3 etc.)* hardness 60-62hrc* for different applications applications: efb shreddingtyresplasticaluminiummswclothbottleswaste reductionpaddy strawbiomassmore according to customer requirement

HVPL manufacture disc brake pads, automotive disc brake pads, magnetic disc brakes pads, asbestos free disc brake pads using premium quality material, modern manufacturing technology and are designed to provide maximum safety under all driving conditions. They are formulated for smooth, clean operations with quiet performance, excellent drum and disc compatibility, good wear resistance, consistent stopping power in all conditions, from the quiet drive in the country to the harsh conditions, of city traffic. Our brake pads offer good and solid all round braking performance. They provide excellent pedal feel regardless of hot or cold braking conditions. Compared to competitors in the same class our disc brake pads offer: Advanced formulations to deliver increased stopping powerExcellent consistency in braking performanceApplication specific shims for lowest noise and longest lifeGood noise suppressionElectronic wear sensors where applicableExcellent comfort characteristicsVery low level of dustExcellent value for money Whatever the size of Commercial vehicle you run, from light vans to 42 tons trucks, HVPL have a Brake Pad for you which will increase the life of your brakes and reduce your costs. HVPL will keep the cost of ownership down. Compared to OE equipment, the cost savings with our brake pads is significant. Whats more you are guaranteed the highest quality. All of our disc pads are approved to Regulation and carry the mark. The R&D department ongoing research programme has lead to the development of a range of materials which vary in characteristics. All are asbestos free and kind to discs but vary in performance according to their usage: HVPL have placed great emphasis on testing our prod

We offer brake drum. Hvpl manufactures a wide range of products for heavy duty vehicles trucks, trailers and buses.brake drums for heavy duty trucks & trailersbrake drums for light commercial vehicleshubs & spoke wheelsspring and equalizer brackets and shacklestorque armsrubber bushesclutch pressure platesflywheels manufacturingsophisticated tool room pattern designing & casting methodizing process documentation and sqc state-of-the-art foundry high pressure moulding line with flask size 914 x 609 x 355 355 tri-trace induction melting furnace heavy duty, high production automatic and cnc machines to produce large volumes of components with consistent quality

as per your requirement we can manufacture any kind of automobile components from cast iron, cast steel, s g iron or in m.s too.

We are offering torque rod.The torque rod has multi-functional role in truck and trailer suspensions. It controls driveline angles of the vehicle, restrains rotation of the axle housing while accelerating and braking, locates the axle and maintain alignment and absorbs leaning & corning forces. Hvpl torque rods provide lateral support for suspension. They also provide greater stability and roll stiffness as well as keep the axle centered laterally and control axle walk-out on rear suspension.Hvpls truck torque rods feature longer life, lower cost-per-mile bushings that are easier to install and require no maintenance or grease. The rotating bushings in our torque rods make installation easy and they automatically zero out to ride height. There's no need to worry about marking the bolt hole position when rebushing the rod with hvpl bushings since the pins rotate 360 degrees. Hvpls bushings are chemically resistant to contaminates such as road salt, grease, oil, acidic cleaning solvents, hydraulic fluid and diesel fuel.All hvpl torque and transverse rods with ratings of 52k and below utilize the hvpl rod design. Hvpl rod is lighter and more compact than conventional rods. The forged construction produces greater structural integrity, while the unique bonded bushing reduces the friction and heat that damages ordinary bushings - providing longer life and greater payload. Hvpl rods are available in one or two piece configurations. Torque rods - longitudinal torque rods help maintain optimum driveline angles by absorbing axle braking and driving torque. This ultimately reduces vibration and helps prolong the life of driveline components. Transverse rods - provide lateral support for hvpl suspensions by transmitting loads directly into the frame, instead of through the suspension. This provides greater stability and roll stiffness as well as keeping the axle centered laterally and controlling axle walkout on walking beam suspensions.

HVPL Brakes one of the leading manufacturer and exporter of brake Lining for Heavy Commercial Vehicles. We specialize in design and Manufacture of High Quality Non- Asbestos Brake Lining for wide range of Trucks, Buses, Trailers and Commercial Vehicles.Brake linings are a combination of Friction Material. Prior to the mid-1970s, the most common friction materials in use for normal duty were termed Organics. These friction materials usually contained about 30 40 % wt. of organic components and were asbestos base. After mid-1970s, the introduction of front wheel drive vehicles brought about the widespread usage of a new class of friction materials called semimetallics, also called semi Mets and carbon- metallic. Because of the allegedly adverse health effects associated with asbestos fibres, a second new class of friction materials called Non Asbestos Organics (NAOs) came out. In the case of automotive friction materials, the Coeff.of friction is usually found to decrease with increasing unit pressure and sliding speed at a given temperature. For a Fixed amount of braking the amount of wear of automotive friction material tends to remain fairly constant or increase slightly with respect to brake temperature, but once the temperature reaches >200C , the wear increases exponentially with increasing temperature because of thermal degradation of organic components and other chemical changes. At HVPL in Brake linings Glass fibres, ceramic fibres, acrylic fibres and cellulose fibres are being used in replacement of asbestos as they are more thermally resistant than asbestos.The methods for producing most friction materials are concerned with the placement of the reinforcement strand or wire within the matrix using some sort of winding operation. Cermet materials are manufactured using the powder metallurgy technique.

HVPL Brake shoes are made of non-asbestos friction material to give finest braking experience equivalent to or better than OE standard. We use specially developed adhesive to ensure proper bonding between the friction material and metal back plate. The brake shoes are welded using projection welding to ensure proper strength between rim and web plate.HVPL Brake Pad and Brake shoes undergo following inspections: Friction testing as per SAE J661 StandardBonding strength testing between lining and back plateHardness TestingWelding strength testing between rim and web plate of Brake Shoes We can categorize Brake Shoes as per vehicle requirements depending upon their Friction Material properties Brake Shoes are Organic, Metallic or Ceramic type & Depending upon their Shoes they can be classified as Aluminium casting & fabricated shoe.

We offer shackle pins. Hvpl is a prominent exporter and manufacturers of shackle pins. We are offering shackle pins, which are also called bell crank pins. These shackles pins are prepared with bright bar with grinding and induction hardening. These are normally fitted in assembly lever for heavy vehicles. Shackle pins are available in various designs, colors and sizes. The pins assembled have been hardened with certain case depth providing higher resistance to wear. Currently a series of shackles and pin assemblies installed with greaseable type of pins have been produced and supplied together with polyurethane bushes for improved product life and heavy duty performance. The entire manufacturing process is completely done in-house thereby ensuring enhanced control over the manufacturing processes to ensure only premium quality products are produced. The well-equipped qa laboratory has modern testing facilities such as, electronic microscope, digital rockwell and micro-vickers hardness tester, tensile load tester, etc. To ensure only superior quality products are being manufactured and delivered to customers.