Heavy Engineering Corporation Ltd.

Masjid Moth, Delhi

HEC designs and manufactures heavy duty Electric Over Head (EOT) cranes for application in Steel Plant, Engineering sector, Space Research etc. The highest capacity crane designed & manufactured so far is 450 T Ladle Crane for handling hot liquid metal. EOT Cranes for workshops and engineering sector up to 400 t capacity, Ladle Crane for handling Hot metal Ladles in Steel and metallurgical plant up to 450 t, Rotating Trolley Crane, Tundish Handling Crane, Magnet Grab Crane, Slab handling Tong Crane for steel plant application, Four girder double Trolley semi portal Scrap Charging Crane, Cantilever Roof mounted Tower Crane.

Iron castings of piece weight 70 Ton finished wt. (click for forging facilities), Coke Oven door bodies, door frames and flash plated for Coke Oven upto 7 m height.

Iron castings of piece weight 70 Ton finished wt. (click for forging facilities)

•  Centrifugal Casting

Typical Iron castings products are

•  Coke Oven door bodies, door frames and flash plated for Coke Oven upto 7 m height.
•  Base plate for Blast furnace stove
•  Grate bars

Highly Productive & reliable machines for Mining Operation. Over 30 numbers supplied to Indian Coal Sector.

Blast Furnace (Volume 1719, 2000, 3200 CuM): Supplied to BSP, BSL , VSP and exported to Turkey & Egypt. Supplies include: Charging Distributors, Pig Casting Machines etc.

Designed for heavy duty services and stable product size. Supplied over 12 nos for coal and iron ore crushing.

•  Wide range of models with receiving opening ranging from 1350 to 1500 mm
•  Adjustment provision for discharge setting to compensate wear & tear of concaves & mantel.
•  Spider suspension of main shaft assembly.
•  Optional duel prime movers
•  Different models available for various output range.

CNC Double Column Machine Specification:

• Table Diameter : 3 to 5 meter
• Max turning diameter 4 to 6 meter
• Max turning height 3.1 to 4.2 meter
• Max wt. of work piece 30 to 80 MT

• CNC Single Column Machine Specification:

  • Table Diameter : 2 to 5.5 meter
  • Max turning diameter 4 to 7 meter
  • Max turning height 1.6 to 2.85 meter
  • Max wt. of work piece 20 to 50 MT

For fine crushing of coke etc. for Sintering and other applications. Two stage crushing made possible in one unit. Available in various capacity range.

Crushing rolls For fine crushing of coke etc. for Sintering and other applications. Two stage crushing made possible in one unit.

For fine crushing of coke etc. for Sintering and other applications. Two stage crushing made possible in one unit. Available in various capacity range.

Ladle crane manufactures heavy duty Electric Over Head (EOT) cranes for application in Steel Plant, Engineering sector, Space Research etc. The highest capacity crane designed & manufactured so far is 450 T Ladle Crane for handling hot liquid metal.

Specifications:

• Max. work weight per meter of planning length 2 MT
• CNC System Fanuc / Siemance (2 Axis)

Steel melting converters : supplied to bsl, bsp, vsp, dsp, rsp, malvika steel plants, indomag( jindal) 5 nos converters and 10 nos mixers supplied.

We are engaged in supplying of Horizontal Boring Machine

Coke Oven Battery (4.3 M to 7.0 M high) :Supplied to BSL, BSP VSP, DSP and Exported to Turkey, Egypt, USSR & Sri Lanka. Supplies include: Coke Pusher Coal Charging Car Coke Guide Car Coke Quenching Car Red Hot Coke Car Travelling hoist Charging Hoist Charging Device Discharging Device Door, Frame, Flash plate and Sealing Frames Buckstays, Anchorages and Tie Rods Gas Collecting Mains and Cross Over Gas Mains Reversing Winch Skip Hoist Coal Tower Gates Primary Gas Cooler and Benzol Stripping Column Bend and Valve Assembly

Coke Oven Battery (4.3 M to 7.0 M high) :Supplied to BSL, BSP VSP, DSP and Exported to Turkey, Egypt, USSR & Sri Lanka. Supplies include:

• Coke Pusher
• Coal Charging Car
• Coke Guide Car
• Coke Quenching Car
• Red Hot Coke Car
• Travelling hoist
• Charging Hoist
• Charging Device
• Discharging Device
• Door, Frame, Flash plate and Sealing Frames
• Buckstays, Anchorages and Tie Rods
• Gas Collecting Mains and Cross Over Gas Mains
• Reversing Winch
• Skip Hoist
• Coal Tower Gates
• Primary Gas Cooler and Benzol Stripping Column
• Bend and Valve Assembly

We are one of the famous company, who are manufacturer of Roll Grinding Machine

Roll Grinding Machine specification:

•  Max. dia to be ground : 575 - 1600 mm
•  Distance between centers 2 / 3 to 6 / 7 M
•  Max. weight of roll 3 to 6 T
•  Rigid design for better efficiency & accuracy
•  Accurate concave & convex grinding
•  Electronic / mechanical feed counter for pre-selection of cross feed
•  Built in dynamic balancing device
•  Automatic feed at reversing points
•  Automatic cut off device for grinding wheel
•  Automatic wheel wear compensation

Electronic mechanical feed counter for pre-selection of cross feed, Automatic cut off device for grinding wheel, Automatic wheel wear compensation, Built in dynamic balancing device.

CNC Roll Turning Lathe specification:

• Swing over Carriage 650 - 1600 mm
• Distance between centres 3 - 10 metre
• Max. wt of work piece 8 - 50 MT
• CNC System - Fanuc / Siemens (2 axes)

Applicable for secondary & tertiary crushing of medium hard materials such as gypsum, limestone etc. and bituminous coal. Designed for achieving very high reduction ratio. Available in various models with capacity ranging from 80 to 550 T / Hr. (Coal).

We are providing a various types of products such as Deep Hole Boring Machine

Heavy Steel castings of piece weight 65 Ton finished wt. (as cast wt. upto 90 Ton) (facility of liquid metal upto 120 T) (click for forging facilities)

Material Grades:

• Customer specified

Typical steel castings products are:

• Slag cups for Steel Plants ( 11/15/16/18 CuM )
• Roll chocks
• Roll mill housings
• Cement plant tyre (upto 45T piece weight and 6m dia )
• Cyclotron Magnet poles

Rugged design suitable for mining Coal, Iron ore and other minerals in open cast mines. Easy to maintain and one of the most reliable shovel in this capacity range.

HEC supplied over 550 shovels for various mining organisations in India and treated as one of the most reliable mining shovels operating in Indian mining condition.

• Individual DC drives for main mechanisms - hoist, crowed and swing / travel system.
• MG set with 250 KW squirrel cage induction motor as prime mover and 3 DC generators, one each for hoist, crowed and swing / travel system.
• Magnetic amplifier controlled.
• Electrical supply 3.3 / 6.6 KV, 50Hz, 3

We are manufacturing products like as Radial Drilling Machine

Specifications:

•  Max. dia Drilled in steel 80 - 100 mm
•  Min. distance of axis of spindle to column 530 mm
•  Max. distance of axis of spindle to column 2520 / 3070 and 3620 / 4470 mm

Continuous Casting MachinePlant : Supplied to RSP, BSL, BSP & VSP for Turnkey Project executionequipment.

 

• Swing over Carriage 650 - 1000 mm
• Distance between centres 3 - 6 metre
• Max. wt of work piece 8 - 15 MT
• CNC System - Fanuc / Siemens (2 axes)
• Centralised lubrication
• 8 station programmable turret
• 2 Stage high efficiency transmission head stock
• Spring clamped - Hydraulic unclamped tail stock

Rolls: HEC is pioneer in manufacturing of Forged Rolls in India and is a regular supplier to major Steel plants of India. Dedicated facilities have been created for Induction hardened CRM rolls. Stringent quality control ensures High Quality Rolls.

Max. Milling length 10000 - 12000 mm, Bestowed with the onus of making the country self-reliant for heavy engineering equipment and services, HEC continues to contribute in the nation-building endeavor.

 

HEC is the first Indian company to manufacture walking Dragline of 24 CuM Bucket capacity. 12 nos of Draglines of 24 /96 and 3 nos of 20 / 90 Draglines supplied by HEC to Indian Mining industry.

Hoist & Drag powered by 1300 HP motors, 2 for each systems.

Devised with MG set, all motions are powered by adjustable armature DC generators.

2 MG sets each driven by 1750 HP synchronous motor.

MG set - for DC supply to main mechanism motors.

Forgings of various grades of alloy material up to piece weight of 65 Ton finished wt. Complete with heat treatment and machining.

We are deal in all types of Sinter Plant Equipment that are available at market leading prices.

Hec is the first indian company to manufacture walking dragline of 24 cum bucket capacity. 12 nos of draglines of 24 96 and 3 nos of 20 90 draglines supplied by hec to indian mining industry.

Blast Furnace (Volume 1719, 2000, 3200 CuM): Supplied to BSP, BSL , VSP and exported to Turkey & Egypt. Supplies include Technical StructureCh. Column & PlantsCooling PlatesCharging ArrangementsCharging DistributorsSkip winchBelt Control WinchValvesRolling Stocks etc.Cast House MachinesPig Casting Machines etc.

Rugged design suitable for mining coal, iron ore and other minerals in open cast mines. Easy to maintain and one of the most reliable shovel in this capacity range.

Applicable for secondary & tertiary crushing of medium hard materials such as gypsum, limestone etc. and bituminous coal. Designed for achieving very high reduction ratio. Available in various models with capacity ranging from 80 to 550 T Hr. (Coal).

We are offering latest products of vertical turning machine for all age man & woman.

We provide you to its world of vertical milling machine