Post Buy Requirement
HH
Chennai, Tamil Nadu, India
Add Review

Our Products

  1. Industrial Valves 13 Products available
  2. Pressure Switches 4 Products available
  3. Filters 11 Products available
  4. Hydraulic And Pneumatic Cylinders 3 Products available
  5. Dryers 3 Products available
  6. Sensors 3 Products available
  7. Valves & Valve Fittings 11 Products available
  8. Hose Pipes 4 Products available
  9. Others 85 Products available

Other Products / Services

Process Controller

TYPE :SV8, TE6


POWER SUPPLY: 85V-265V AC, other option M


INPUT: Ma , V, mv&RTDselected by Software


SUPPLY : 24V DC @ 30 Ma 12 V DC@60 Ma


OUTPUT: 2 Relay outputs & other options


ACCURACY : 0.25% F.S.+ 1Digit


DISPLAY : 4Digit dual display

View Complete Details

CABLE FLOT LEVEL SWITCH

Make : Nivelco Made in Germany/ Aquapra Make


Material : Pvc Or Neoprene


Contact Type: No& Nc


Cable Length: 5 Mtr &10 Mtr

View Complete Details

Hydraulic Gear Pump

  • Type single or tandem gear pump
  • Rpm 22.70 to 100.00 lpm
  • Working pressure 200 bar
  • FLOW, LPM 6.1 to 40.00 lpm

Make: Rexroth


Model: R9830322 , AZ PW 21 004 RQR XX MB



Suction delivery: flange mounting

View Complete Details

Digital Pressure Sensor Controller

  •   Set pressure range
  • PSE200 101 to 101kPa 10 to 101kPa 10 to 101kPa 0.1 to 1MPa

Multi-Channel


Four sensors can be connected.
Applicable sensors: PSE53, 54, 56
Capable of controlling various different applications from one controller
4 inputs, 5 outputs

View Complete Details

Diaphragm Valve For Ultra High Purity

For UHP gas delivery in semiconductor and other clean industries.
Used as gas shutoff valve.
No spring is used for the wetted parts and drive part is also separated
from the diaphragm. Dead space in the flow path is small to suppress
the particle generation.

View Complete Details

Check Valve Vacuum Generator

Check Valve/Vacuum Generator/Flow Switch AP












SUMMARY


Fluid back-flow is prevented by back pressure.
Unique design with only one moving part in the gas stream, an O-ring.
Springless structure suppresses particle generation by vibration or
chattering or pressure fluctuation on downstream side.


[Vacuum generator]
Vacuum generation equipment.
Applicable to emission of unnecessary gas remaining inside the
piping during gas cylinder replacement.


[Flow switch]
Detects excess flow above a given flow rate, caused by pipe breakage, etc.





Series

 

Type

Body material

Connection type

Connection size

AP

Check valve

316L SS secondary remelt

Face seal
Tube weld

1/4'', 3/8''

AP

Vacuum generator

316L SS

Face seal
Tube weld

1/4'', 3/8''

AP

Flow switch

316L SS secondary remelt
316L SS

Face seal
Tube weld

1/2'', 3/4''





View Complete Details

Diaphragm Valve For General Applications AK

Rc, R and NPT connections are added to series.
For wide variety of applications from semiconductor to general.
Cleaned for O2service
Compact and lightweight by making the actuator shorter (AK3542/4542)
M5 actuation port (AK3542/4542)
Compact and lightweight by modifying the knob design (AK3652/4652)
The knob is a unique design that combines a scalloped round knob with a raised
rectangular section to provide two choices of gripping.(AK3652/4652).



Series

 

Type

Body material

Connection type

Connection size

AK

Air operated

316 SS

Compression
Rc, R, NPT

1/4'',3/8''

AK

Manual

316 SS

Compression
Rc, R, NPT

1/4'',3/8''



View Complete Details

Diaphragm Valve For Ultra High Purity AZ

Cleanroom assembled and He leaked tested.
Valve meets dimensional requirements of SEMI F36-0299, Option I.
User-friendly forged body.




Series

 

Type

Body material

Connection type

Connection size

AZ

Air operated

316L SS

Face seal
Tube weld

1/4''
3/8''
1/2

AZ

Manual

316L SS

Face seal
Tube weld

1/4''
3/8''
1/2







View Complete Details

Electric Actuator

A support guide is designed to support work pieces with significant
overhang.
Easy installation with the same outer dimensions as Series LEF body,
contributes to reductions in man-hour for design and assembly
Standardly equipped sealing band prevents the scattering of grease and
entry of foreign matter from outside.

Description

 

Type

Stroke
(mm)

Rated load (N)
Basic dynamic load rating

Rated load (N)
Basic static load rating

Ball screw drive

LEFG16-S

50 to 500

6250

8350

Ball screw drive

LEFG25-S

50 to 600

8950

13900

Ball screw drive

LEFG32-S

50 to 800

16500

22000

Ball screw drive

LEFG40-S

150 to 1000

22700

34500

Belt drive

LEFG16-BT

300 to 1000

6250

8350

Belt drive

LEFG25-BT

300 to 2000

8950

13900

Belt drive

LEFG32-BT

300 to 2000

16500

22000

Belt drive

LEFG25-BS

300 to 2000

6250

8350

Belt drive

LEFG32-BS

300 to 2500

8950

13900

Belt drive

LEFG40-BS

300 to 3000

16500

22000




View Complete Details

High Rigidity Slider Type

High Rigidity Slider Type/Belt Drive LEJB


Max. stroke: 3000 mm
Max. speed: 3000 mm/s
Max. acceleration/deceleration: 20000 mm/S2
Compatible drivers: LECSA LECSB LECSCL ECSS


Spec. Model Stroke
(mm) Work load (kg)
Horizontal Speed
(mm/s) Screw lead
(mm)AC servo motorLEJB40200 to 2000MAX.
20MAX.
200027AC servo motorLEJB63300 to 3000MAX.
30MAX.
300042


View Complete Details

Self Seal Fittings KC

One-touch installation and removal.
Built-in self-seal mechanism.
Air does not exhaust after removal of tubing.
Copper-free (Electroless nickel plated)

View Complete Details

Tube Stand Tube Reel TB

Compact size without taking up space.


Easy installment just by putting tube reel.

View Complete Details

Insert Fittings KF

Vacuum 1.3 x 102 kPa applicable
Piping can be done without removing nut.
Fluid temperature: 5 to 150C (Brass sleeve) 5 to 60C (Resin sleeve)
Steam can be used.
Grease-free

View Complete Details

High Precision Stroke Reading Cylinder

Movable scale cylinder


















Series



Action



Bore sizemm



Applicable counter



CEP1



Double acting



1220



CEU5/CEU1



View Complete Details

OTHER CLAMP CYLINDERS


Pin Clamp Cylinder - Series CKU, Pin Shift Cylinder - Series CKQR, Plate Clamp Cylinder - SeriesM(D)UKA, Clamp Cylinder - CKGV, Pin Shift Cylinder - CKZP

View Complete Details

Cylinder With Turntable MGT

Integration of the compact guide cylinder (Series MGP) and a manual
turntable.
High precision bearings for smooth turning return movement
Table unit has positioning mechanisms for each 90 and 180 of
rotation.

Type

 

Bearing

Series

Action

Bore size (mm)

Standard

Slide bearing

MGTM

Double acting

63,80,100

Standard

Ball bushing

MGTL

Double acting

63,80,100

View Complete Details

AIR SLIDE TABLE MXQ

Reduced in height: 10% reduction (27 mm: Existing model 30 mm)
Product weight: 22% reduction (298 g: Existing model 380 g)
Allowable kinetic energy: 64% improvement (0.09 J: Existing model
0.055 J)



Type

 

Series

Action

Bore size (mm)

Double ported type

MXQ□A

Double acting

6,8,12,16,20,25

Low thrust with
high rigidity type

MXQ□B

Double acting

6,8,12,16,20

Single side ported type

MXQ□C

Double acting

8,12

Height interchangeable type

MXQ

Double acting

6,8,12,16,20,25


View Complete Details

Shock Absorber RB

・Automatic adjustment to the most appropriate absorption performance

Type

Series

Absorbed energyJ

Absorption strokemm

O.D. thread

Standard

RB

0.5~147

4~25

M6~M27

Coolant resistant

RBL

3.92~147

6~25

M10~M27

Short

RBQ

1.96~49

4~13

M16~M32

 

View Complete Details

Water Cooled Aftercooler

Can cool high temperature compressed air from compressors down to
40C or less and efficiently remove moisture from the air.
Stable operation is possible even in an environment with a high
temperature, high moisture and heavy foreign particles for this water
cooled type.

 Series 

 

 Applicable compressor 

 Air flow capacity   L/min (ANR) 

HAW

2.2 to 110kW

300 to 18000

View Complete Details

Heavy Duty Auto Drain ADH

Easy maintenance.-Possible to maintain easily without removing pipes.
No need for electric power and no waste of air.
Float style drain allows automatic draining without electric power.



Series

 

Port size

Auto drain

ADH4000

1/2

Float type

View Complete Details

Luoropolymer Fittings, Hyper Fitting

Material: New PFA
4-layer seal construction
Reducer enables tube size changeability with no change of body required.

View Complete Details

Programless Controller LECP

No programming
Capable of setting up an electric actuator operation
without using a PC or teaching box
Speed/acceleration 16-level adjustment
Compatible with actuators with locks
Setting 3-level pushing force

Type

 

Series

Compatible
motor

Power
supply
voltage

Parallel
input/output
Input

Parallel
input/output
Output

Number
of step
data

Programless
type

LECP1

Step motor
(Servo/24 VDC)

24 VDC
±10%

6
(Photo-coupler
isolation)

6
(Photo-coupler
isolation)

14 points

















View Complete Details

Slider Type Ball Screw Drive

Clean Series LEFS Step Motor (Servo/24 VDC) Servo Motor (24 VDC)


Max. work load: 60 kg
Positioning repeatability: 0.02 mm
Compatible controllers: LECP6 LECA6 LECP1 LECPA LECPMJ

 

Model

Stroke
(mm)

Work load (kg)
Horizontal
Vertical

Speed
(mm/s)

Screw
lead
(mm)

Step motor
(Servo/24 VDC)

11-LEFS16

50 to 500

MAX.14

MAX.500

5,10

Step motor
(Servo/24 VDC)

11-LEFS25

50 to 600

MAX.25

MAX.500

6,12

Step motor
(Servo/24 VDC)

11-LEFS32

50 to 800

MAX.45

MAX.500

8,16

Step motor
(Servo/24 VDC)

11-LEFS40

150 to 1000

MAX.55

MAX.500

10,20

Servo motor
(24 VDC)

11-LEFS16A

50 to 500

MAX.10

MAX.500

5,10

Servo motor
(24 VDC)

11-LEFS25A

50 to 600

MAX.18

MAX.500

6,12

AC servo motor
(100/200/400 W)

11-LEFS25S

50 to 600

MAX.20

MAX.900

6,12

AC servo motor
(100/200/400 W)

11-LEFS32S

50 to 800

MAX.45

MAX.1000

8,16

AC servo motor
(100/200/400 W)

11-LEFS40S

150 to 1000

MAX.60

MAX.1000

10,2
















View Complete Details

Soft Nylon Tubing TS

Max. operating pressure: 1.0 MPa (at 20)

Series

 

Tubing O.D.
Metric size

Tubing O.D.
Inch size

Color

Fluid

TS/TISA

φ4,φ6,φ8,φ10
φ12,φ16

φ1/8''3/16''1/4''
φ3/8''1/2''

Black, White, Red, Blue, Yellow, Green

Air, Water





View Complete Details

FR One Touch Fittings KR W

For use where weld spatter is generated./Flame resistant (Equivalent to
UL-94 Standard V-0)

View Complete Details

Floating Pipe Type Oil Cooler

High heat transfer coefficient
High heat conductivity
Compact design requiring less installation space.
1/2 to 1/5 the size of conventional oil coolers.
High heat transfer coefficient through the effects of turbulence.
Minimal pressure drop.

Series

 

Heat transfer area
(Inside pipe) m2

Heat exchange
volume (kW)

Flow rate L/min
Oil side

Flow rate L/min
Cooling water side

HOW

0.084 to 0.75

6 to 52

20 to 400

25 to 100





View Complete Details

Magnetic Separator FHM

Magnetic separators protect machinery from malfunctions, reduced
precision, and burnout by adsorbing and eliminating contaminants
in the fluid by means of magnetism. This helps extend the service
life of hydraulic equipment.

Series

 

Applicable fluid storage
volume (L/unit)

Flow speed

Fluid

FHM

20 to 200

3 m/min or less

FHMN : Petroleum, Water glycol,
Cutting oil, Emulsion
FHMV : Phosphoric ester




View Complete Details

Fixed Pipe Type Oil Cooler

Water Cooled /Iron Particle Type. High heat transfer coefficient through the effects of turbulence.
Compact design requiring less installation space.
1/2 to 1/5 the size of conventional oil coolers.
Flexible installation orientation.
Minimal pressure drop.

Series

 

Heat transfer area
(Inside pipe) m2

Heat exchange
volume (kW)

Flow rate L/min
Oil side

Flow rate L/min
Cooling water side

HOWF

0.077 to 1.28

5.2 to 73

20 to 800

40 to 125





View Complete Details

Compact Hydraulic Cylinder CHQ

Compact Hydraulic Cylinder CHQ/CHDQ


Lightweight, compact aluminum body
Possible to mount auto switches.
Same longitudinal dimensions for cylinders with/without auto switches.
With auto switch (Series CHDQ : CHDQ, CHDQW)

Series

 

Nominal pressure (MPa)

Body material

Operation

Tube bore size (mm)

CHQ

3.5

Aluminum

Double acting single rod

20, 32, 40, 50
63, 80, 100

CHQW

3.5

Aluminum

Double acting double rod

20, 32, 40, 50
63, 80, 100

 



View Complete Details

Suction Guard FHG

Prevents collected dust from falling into the tank.
No need to replace flushing oil.
Easy maintenance and no air mixing.
Integrates a lubrication port strainer, suction filter, and air breather.
Possible to detect clogging with the differential pressure indicator and
differential pressure indication switch (CB-H).



Series

 

Port size

Flow range L/min

Operating
pressure

Element μm
(Nominal filtration)

FHG

1/2B to 3B

18 to 450

Negative pressure

Micromesh :
74, 105, 149




View Complete Details

Industrial Filter Vessel Series FGE

Industrial Filter Vessel Series FGE







Description




SUMMARY
Ideal for medium flow filtration (Max. 230 L/min).
Easy element replacement for V-band type
(With cover anti-scattering mechanism)




Series

 

Port size

Max. operating pressure

Operating temperature ()

FGE

R1, 2

0.7MPa

MAX.80

View Complete Details

Industrial Filter Vessel

Industrial Filter/Vessel Series FGD


Ideal for low flow filtration (Max. 60 L/min).
Possible to select the antistatic specification (FGDE, FGDF).

Series

 

Port size

Max. operating pressure

Operating temperature ()

FGD

Rc3/8 1/2 3/4

0.7, 1MPa

MAX.80

View Complete Details

Electro Pneumatic Regulator ITV

Stepless control of air pressure in proportion to electric signals
Sensitivity: 0.2 kPa (100 kPa specification)
Linearity: 1% or less (F.S.)
Hysteresis: 0.5% or less (F.S.)
Communication: CC-Link, DeviceNetTM, PROFIBUS DP, RS-232C.



Series

 

Port size

Set pressure (MPa)

ITV0000

Built-in One-touch fitting
φ4,φ5/32

0.001 to 0.1
0.001 to 0.5
0.001 to 0.9
-1 to -100kPa

ITV1000

1/8,1/4

0.005 to 0.1
0.005 to 0.5
0.005 to 0.9

ITV2000

1/4,3/8

0.005 to 0.1
0.005 to 0.5
0.005 to 0.9

ITV3000

1/4,3/8,1/2

0.005 to 0.1
0.005 to 0.5
0.005 to 0.9











View Complete Details

Clean Regulator

Clean Regulator/Fluororesin Type SRF







Description




SUMMARY


Wetted parts
Body: New PFA Diaphragm: PTFE
Recommended maximum flow rate: 20 L/min (SRF50)
(0.3 MPa at inlet pressure, Fluid: Water)



View Complete Details

Micro Mist Separator AFD A

Easy replacement of the element
The element and the bowl are in one piece. Replacement can be done in hand.
Energy saving regulator
Pressure drop: Max. 50% improvement
Reduced required maintenance space: Max. 46% reduction
Better visibility & safer
The bowl is covered with a transparent bowl guard.
Attachment
Spacer : Y200-A, Y300-A, Y400-A, Y500-A
Spacer with bracket : Y200T-A, Y300T-A, Y400T-A,

View Complete Details

Filter Regulator

Filter Regulator with Built-in Pressure Gauge with Backflow Function AWG K


Improves visibility of pressure gauges located in various locations.

Series

Port size

Set pressure (MPa)

Filtration (μm)

AWG20K to 40K

1/8,1/4,3/8,1/2

0.05 to 0.85

5

View Complete Details

Speed Controller Adjustable

SUMMARY
Flow adjustable by flat head screwdriver.
Prevention of an unnecessary manual operation.

Type

 

Series

Port size in 
the cylinder side

Applicable tubing O.D.
Metric size

Applicable tubing O.D.
Inch size

With One-touch fittings
Elbow/Universal type

AS□□□1F-D

M5 to 1/2

φ3.2 to φ12

φ1/8'' to φ1/2''

With One-touch fittings
In-line type

AS□□□1F-D

φ3.2 to φ12

φ1/8'' to φ1/2''

With One-touch fittings
Dual speed controller

ASD□□□F-D

M5 to 1/2

φ3.2 to φ12

φ1/8'' to φ1/2''

Metal body

AS□2□0-D

M5 to 1/2

φ3.2 to φ12

φ1/8'' to φ1/2''

 





View Complete Details

Pressure Gauge

Available with a limit indicator and color zones. Series G15, G27, G36, GA36, G46, GA46, G33, GA33, G43, G36-L, G46-L



Series

 

Size (O.D.)

Connection thread

G15

φ15

R1/8, M5(Female thread)

G27

φ27

R1/8, 1/16

G36

φ37.5

R1/8, M5(Female thread)

GA36

φ37.5

R1/8

G46

φ42.5

R1/8, 1/4, M5(Female thread)

GA46

φ42.5

R1/8, 1/4

G33

φ30

R1/8

GA33

φ30

R1/8

G43

φ43

R1/8, 1/4

G36-L

φ37.5

R1/8

G46-L

φ42.5

R1/8,1/4

View Complete Details

Check Valve AK

- Body Material: Brass, Stainless Steel - Rubber Material: NBR, FKM, CR


Type

 

Series

Port size

Applicable tubing O.D.
Metric size

Applicable tubing O.D.
Inch size

In-line type

AK2000/AK4000
AK6000

1/8 to 1

-

-

Straight type

AKH

-

φ4 to φ12

φ5/32'' to φ1/2''

Male connector type

AKH

M5 to 1/2

φ4 to φ12

φ5/32'' to φ1/2''

Bushing type

AKB

1/8 to 1/2

-

-

Made to Order
for air/water

・Body material: Brass, Stainless steel ・Rubber material: NBR, FKM, CR ・High temperature, low temperature ・Low cracking

1/8 to 1/2

-

-





View Complete Details

Pressure Gauge G

Oil-free, external parts copper-free
With limit indicator

















Series

Size (O.D.)

Connection thread

G46E

φ42.5

R1/8,1/4

View Complete Details

Pressure Switches IS


  • The pressure switch IS100 series can be utilizedfor automatic air pressure control in a wide varietyof fields, such as industrial machinery or chemical plant

  • Pressure adjustment range: 0.02 to 0.1 MPa

  • Electric wiring: Various wiring and entry methods can be selected

  • Mechanical service life: 100, 000 cycles

View Complete Details

Lock Up Valve IL

The lock-up valve is used if any air source or air supply piping linefailure occurs in the air operated process control line.Single acting, Double acting: retains pressure at the operating areaas emergency operation until the air source is recovered to its normal state.3 Port: Changes the supply port if a trouble occurs.



Series

 

port size

set pressure (MPa)

Shut-off pneumatic circuit pressure

IL.211.220

Rc1/4

0.14 to 0.7

0.7MPa

View Complete Details

Filter Regulator AW

Stainless Steel 316 and Special Temperature
Environment (40) Specifications
External parts material: Stainless steel 316
Ambient and fluid temperature: 40 to 80
NACE International Standards compliant


Series
Port size
Set pressure (MPa)
Nominal filtration rating (m)


AW30/40-X2622
1/43/81/2
0.05 to 0.85
5

View Complete Details

Electro Pneumatic Transducer IT

The air pressure in proportion to the current signal can be output.
Wide output pressure range/0.02 to 0.6 MPa
Fast response
Independent electric unit/Explosion-proof (flameproof) construction
Easy span adjustment

Series

 

Port size

Supply air pressure (MPa)

Input current

IT600

Rc1/4

0.14 to 0.24

4 to 20mA DC

IT601

Rc1/4

0.24 to 0.7

4 to 20mA DC

View Complete Details

Booster Relay IL

Used when the piping distance between instrumentation and
operational area is long, or when operational area has large capacity.
Can help accelerate actuation speed considerably.

Series

 

Port size

Input/Output

Input/Output pressure

IL100

Rc1/4, 3/8

1:1

0.7MPa

XT240

Rc. NPT 1/4 (IN), 1 (SUP. OUT)

1:1

0.7MPa

View Complete Details

Compact Pressure Switch ZSE

Can be integrated with ZX or ZR ejector system.
Suction filter comes as standard.

Series

 

Type

Set pressure range

ZSE2

Vacuum pressure

0 to -101kPa

ISE2L

Positive pressure

0 to 100kPa

ISE2

Positive pressure

0 to 1MPa

View Complete Details

Regulators For Ultra High Purity

Regulators for Ultra High Purity (UHP) AP/SL/AP/AZ


For UHP gas delivery in semiconductor and other clean industries.
Body material: 316L SS secondary remelt or 316L SS
Electropolished wetted parts
Metal seal to atmosphere.



Series

 

Actuation

Application

Body material

Connection type

Connection size

AP/SL

Single stage

Distribution (Compact)

316L SS
secondary remelt

Face seal
Tube weld

1/4'', 3/8''

AP/SL

Single stage

Distribution

316L SS
secondary remelt

Face seal
Tube weld

1/4'', 3/8''
1/2'', 3/4''

AP/SL

Single stage

Bulk gas

316L SS

Face seal
Tube weld

1/2'', 3/4'', 1''

AP/SL

Single stage

Source

316L SS
secondary remelt

Face seal
Tube weld

1/4'', 3/8''
1/2'', 3/4''

AP/SL

Single stage

Sub-atmospheric pressure

316L SS
secondary remelt

Face seal
Tube weld

1/4'', 3/8''
1/2'', 3/4''

AP

Two stage

Source

316L SS
secondary remelt

Face seal
Tube weld

1/4'',3/8''

AZ

Single stage

Distribution

316L SS

Face seal
Tube weld

1/4'', 3/8''
1/2''

AZ

Single stage

Source

316L SS

Face seal
Tube weld

1/4'', 3/8''
1/2''

AZ

Single stage

Sub-atmospheric pressure

316L SS

Face seal
Tube weld

1/4'', 3/8''
1/2''





















View Complete Details

Rotary Gripper MRHQ

  •   Cylinder bore size (mm)
  • MRHQ 10 16 20 25

The gripper function and the rotation function have been integrated in a
compact package.
Possible to grip and reverse the workpiece in conveyor lines with a single
unit.
Rotation range and angle adjustable.

View Complete Details

Auto Hand Changing System MA

SUMMARY


The robot hand tools change automatically to accommodate workpieces
of different shapes, thus making it possible to adopt the FMS (flexible
manufacturing system) in the assembly line.



Series

 

Positioning

Action

MA210

Ball coupling

Single acting

MA310

Ball coupling

Single acting

MA311

Ball coupling

Double acting

MA320

Curved coupling

Single acting

MA321

Curved coupling

Double acting

View Complete Details

Slide Guide Round Body

Air Gripper 2-Finger Type, Vertically compact, lightweight due to the wedge shaped cam construction.
Ideal for operations which external force is applied to, such as pressfitting operations.
Repeatability: 0.01 mm

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Hindustan Hydraulics & Pneumatics (Hindustan Hydraulics & Pneumatics)
  • NP:157, Linghi Chetty Street, Parry's Corner, George Town , , Chennai, Tamil Nadu - 600001
  • Share us via