Check Weigher:

1. Counting & Weighing of bags, carton box and all types of packed materials of various items
2. Counting & checking with set values to accept and to reject the bags/packed items
3. Saves all data in RTC (Real Time Clock)
4. Highest speed in counting and weighing with Automatic reject system
5. Custom made software for various reports, chits, invoice and total Supplier management Systems SMS

Approved By Government Of India - Ministry of Consumer affairs

Check Weighers can be well suited for counting and weighing of bags, carton box and all types of packed materials of various sizes.

Special Features:

1. Custom made as per requirement
2. Accuracy: Less than or equal to 20g for 50kg
3. Capacity: 400 - 500 bags/Hr
4. Weighing range from 200 grams to 200 Kgs
5. Highest Speed in counting & weighing
6. Custom made software - total Supplier / customer management Systems (SMS) for various reports, chits, invoice, etc.,
7. Total Inventory Control

The machine performs any size based separation with the use of wire mesh or perforated sheet and can work for various application of solid separation or solid liquid separation or slurry separation

Control Transformer & Line Chokes

1. We also offer a wide range of Control Transformer, designed to balance electric supply in medium voltage switchgear
2. Our range of Control transformer is available in both single and three phase configurations with some models capable of vertical mounting to conserve space.
3. Single Phase & Three Phase Control/Isolation Transformers assures long life and reliable performance. Low power loss & temperature rise. Design that can withstand 25% overload and impedance less than 5%

Control Transformers (From 25 VA to 5 KVA)
Line Choke & Reactor (From 0.37kW to 300kW)

Technical Specification :

1. System voltage 415V/220V-50/60 Hz .
2. Primary & Secondary voltages are as per customer requirement
3. Type of core lamination CRNO and CRGO .
4. Super enamelled F class insulated copper wire
5. Bobbins FRP/SMC/Red Fibre .

The loss-in-weight system is normally supplied with a standard hi-tech metering screw feeder either single or twin screw from 15 mm to 250 mm diameter and output range from 1.0kg/hr to, in excess of 30, 000 kg/hr.

The selection of the correct type of feeder from our extensive range is determined primarily by the type and specification of the material to be handled.

Accuracy:

Optimum Loss In Weight measurement results are obtained where the product being handled has good linear volumetric feed:-from 0 to 100% of the required flow rate. In this situation, We expect 0.5% or better accuracy

FlowRate:

Providing the controller can measure the change in weight, very low flow rates can beachieved. The limit on through put of a loss in weight system is the ability to refill the loss in weight hopper in the required time frame.

Special Features:

* Large hopper inlet eliminates material bridging.

* Suitable for use with very fine to coarse, or fibrous, particulate products.

* Easily removable front cover provides a safe and quick access for cleaning.

* Ideally suited to industries that require rapid clean down and product changes.

*Commonly utilized for Plastics, Bulk Foods, Recycling, Concrete, Cement, Aggregates, Grains, Fertilizers, & all drypowders, etc.

Inline Weigh Feeders of bulk material flow is able to weight various material like green tea leaf, rice, wheat, rock phosphate, soya bean`s, cement plant raw material & chemical plant raw material etc. It shows precise weight of Belt Feeder material and is able to accumulate a large amount of material at a time. Moreover, it is reckoned amongst the clients for its sturdiness and durability.To weigh and control bulk flow of various materials in food and other industries., In process related application the flow of material in various departmentssections can be controlled and monitored, Designed, Developed and manufactured such systems for Tea leaf, Soya bean, Soya flakes, Pine wood chips etc.

Semi Automatic Weighing & Bagging

1. Semi Automated Weighing & Bagging is of two Types of Weighment process - Nett & Gross Weighing
2. Suitable for a wide range of agricultural & industrial products
3. Essential parts in stainless steel for food & food grade products
4. Typical output of 120 to 400 bags per hour depending on product
5. Micro controller based
6. Variable speed control unit
7. PVC belt conveyor / Flat conveyor with adjustable speed motor to match with the Weighing & Bagging System

Key Features:

1. Weighing range from 10 50 kgs
2. For Nett & Gross Weighing, as applicable
3. Typical output of 120 to 400 bags per hour depending on product
4. Suitable for a wide range of agricultural &industrial products
5. Unique gravity discharge weigh hopper system for fast cycling
6. Modular construction to customer requirement
7. Micro controller based
8. Electronic weighing system using load cells
9. With quick detachable accessories pneumatically operated bag clamps
10. Essential parts in stainless steel for food grade materials
11. Variable speed control unit
12. Integral dust spreading hood/ clamp for powdery products
13. Mounting structure for the machine on customization access walkway for
14. easy maintenance and cleaning
15. PVC belt conveyor / slat conveyor with 0.5 HP geared motor with adjustable
16. speed to match with theWeighing & Bagging System
17. Stitching Machine Double stitching with automatic wire cutting
18. Sewing head adjustable as required

Special Features:

1. Gentle action on the product through low power consumption.
2. Fast mixing times with a high degree of mixing accuracy.
3. Minimum heat generation.
4. Self emptying with minimum product retention.
5. Volumes range from 5 - 6000 liters

Applications:

1. Mixing and homogenization of powders, pastes and slurries.
2. Addition / spraying of liquids into material.
3. Granulation or agglomeration of powders by the addition of abinder liquid.
4. Mixing of various Flour

DOL Panel, Industrial Control PanelMCC Panel, PLC Automation Panel, Power Distribution Panel, Automatic Power Factor Correction Panel, Soft Starter.`power and control system was being first introduced by us some 18 Years ago in the form of high breaking capacity, MCCB, MPCB and lightning and surge protection as per IEC 60947-2 standard.

Check Weigher:

1. Counting & Weighing of bags, carton box and all types of packed materials of various items
2. Counting & checking with set values to accept and to reject the bags/packed items
3. Saves all data in RTC (Real Time Clock)
4. Highest speed in counting and weighing with Automatic reject system
5. Custom made software for various reports, chits, invoice and total Supplier management Systems SMS

Approved By Government Of India - Ministry of Consumer affairs

Check Weighers can be well suited for counting and weighing of bags, carton box and all types of packed materials of various sizes.

Special Features:

1. Custom made as per requirement
2. Accuracy: Less than or equal to 20g for 50kg
3. Capacity: 400 - 500 bags/Hr
4. Weighing range from 200 grams to 200 Kgs
5. Highest Speed in counting & weighing
6. Custom made software - total Supplier / customer management Systems (SMS) for various reports, chits, invoice, etc.,
7. Total Inventory Control

The machine performs any size based separation with the use of wire mesh or perforated sheet and can work for various application of solid separation or solid liquid separation or slurry separation

Control Transformer & Line Chokes

1. We also offer a wide range of Control Transformer, designed to balance electric supply in medium voltage switchgear
2. Our range of Control transformer is available in both single and three phase configurations with some models capable of vertical mounting to conserve space.
3. Single Phase & Three Phase Control/Isolation Transformers assures long life and reliable performance. Low power loss & temperature rise. Design that can withstand 25% overload and impedance less than 5%

Control Transformers (From 25 VA to 5 KVA)
Line Choke & Reactor (From 0.37kW to 300kW)

Technical Specification :

1. System voltage 415V/220V-50/60 Hz .
2. Primary & Secondary voltages are as per customer requirement
3. Type of core lamination CRNO and CRGO .
4. Super enamelled F class insulated copper wire
5. Bobbins FRP/SMC/Red Fibre .

The loss-in-weight system is normally supplied with a standard hi-tech metering screw feeder either single or twin screw from 15 mm to 250 mm diameter and output range from 1.0kg/hr to, in excess of 30, 000 kg/hr.

The selection of the correct type of feeder from our extensive range is determined primarily by the type and specification of the material to be handled.

Accuracy:

Optimum Loss In Weight measurement results are obtained where the product being handled has good linear volumetric feed:-from 0 to 100% of the required flow rate. In this situation, We expect 0.5% or better accuracy

FlowRate:

Providing the controller can measure the change in weight, very low flow rates can beachieved. The limit on through put of a loss in weight system is the ability to refill the loss in weight hopper in the required time frame.

Special Features:

* Large hopper inlet eliminates material bridging.

* Suitable for use with very fine to coarse, or fibrous, particulate products.

* Easily removable front cover provides a safe and quick access for cleaning.

* Ideally suited to industries that require rapid clean down and product changes.

*Commonly utilized for Plastics, Bulk Foods, Recycling, Concrete, Cement, Aggregates, Grains, Fertilizers, & all drypowders, etc.

Inline Weigh Feeders of bulk material flow is able to weight various material like green tea leaf, rice, wheat, rock phosphate, soya bean`s, cement plant raw material & chemical plant raw material etc. It shows precise weight of Belt Feeder material and is able to accumulate a large amount of material at a time. Moreover, it is reckoned amongst the clients for its sturdiness and durability.To weigh and control bulk flow of various materials in food and other industries., In process related application the flow of material in various departmentssections can be controlled and monitored, Designed, Developed and manufactured such systems for Tea leaf, Soya bean, Soya flakes, Pine wood chips etc.

Semi Automatic Weighing & Bagging

1. Semi Automated Weighing & Bagging is of two Types of Weighment process - Nett & Gross Weighing
2. Suitable for a wide range of agricultural & industrial products
3. Essential parts in stainless steel for food & food grade products
4. Typical output of 120 to 400 bags per hour depending on product
5. Micro controller based
6. Variable speed control unit
7. PVC belt conveyor / Flat conveyor with adjustable speed motor to match with the Weighing & Bagging System

Key Features:

1. Weighing range from 10 50 kgs
2. For Nett & Gross Weighing, as applicable
3. Typical output of 120 to 400 bags per hour depending on product
4. Suitable for a wide range of agricultural &industrial products
5. Unique gravity discharge weigh hopper system for fast cycling
6. Modular construction to customer requirement
7. Micro controller based
8. Electronic weighing system using load cells
9. With quick detachable accessories pneumatically operated bag clamps
10. Essential parts in stainless steel for food grade materials
11. Variable speed control unit
12. Integral dust spreading hood/ clamp for powdery products
13. Mounting structure for the machine on customization access walkway for
14. easy maintenance and cleaning
15. PVC belt conveyor / slat conveyor with 0.5 HP geared motor with adjustable
16. speed to match with theWeighing & Bagging System
17. Stitching Machine Double stitching with automatic wire cutting
18. Sewing head adjustable as required

Special Features:

1. Gentle action on the product through low power consumption.
2. Fast mixing times with a high degree of mixing accuracy.
3. Minimum heat generation.
4. Self emptying with minimum product retention.
5. Volumes range from 5 - 6000 liters

Applications:

1. Mixing and homogenization of powders, pastes and slurries.
2. Addition / spraying of liquids into material.
3. Granulation or agglomeration of powders by the addition of abinder liquid.
4. Mixing of various Flour

DOL Panel, Industrial Control PanelMCC Panel, PLC Automation Panel, Power Distribution Panel, Automatic Power Factor Correction Panel, Soft Starter.`power and control system was being first introduced by us some 18 Years ago in the form of high breaking capacity, MCCB, MPCB and lightning and surge protection as per IEC 60947-2 standard.