Kls-group Ltd.

Kowloon, Hong Kong, Hong Kong

We are offering silicone sealant high-quality acid universal silicone sealant is intended for construction and repair work, has excellent adhesion to the majority of construction materials: glass, metal, ceramics, wood, different types of plastics. Application: sealing of joints of the door boxes and window frames, protection of pu foam from uv-rays, consolidations of connections and joints, sealing of show-windows, stands, panels, wires, cable channels, etc. Usage: cut off cartridge top above a thread. Screw a nozzle and cut off it at an angle 45 ° in diameter equal to width of a crack. To place a cartridge in the gun and to put sealant. Smooth the sealant with the palette knife moistened in soap water. Usage t°: +5°с-+40°с. Storage t°: 0°с-+25°с. Storage term: 18 months. Precautionary measures: in case of contact with eyes it is necessary to wash out a large amount of water and to address to the doctor. Protect from children, to avoid hit on integuments. Work in well aired room. Use protective gloves. color: transparent, white, black.

We are offering silicone sealant neutral universal silicone in the file package is the optimum decision for sealing and consolidation at work with various construction materials. Also it can be applied at work on a glazing and, in particular, to installation and repair of the trading equipment. Application: sealing on a glazing works, sealing of facades at external and internal works, sealing of waste and sewer communications. Fine adhesion to glass, brick, aluminum, concrete, steel, ceramics, fiber glass and the majority of plastics. Silicone sealant is ideal decision for windows-doors systems. Features: one-component, for work with the special gun adapter, possesses fine adhesion to ceramics, steel, concrete, metal and to the covered surfaces, has good resistance to the atmospheric phenomena, to uv-rays, ozone, snow and to extreme temperatures, do not have seasonal restrictions on application, not acid, and does not lead to corrosion of metal and other materials subject to corrosion. Usage: cut off the file package on the one side. Insert the file package into the special gun. To screw on the gun a nozzle of a necessary form (nozzles are usually delivered with the gun). Put sealant. Usage t°: -15°с-+40°с. Storage t°: 0°с-+25°с. Storage term: 18 months. Precautionary measures: in case of contact with eyes it is necessary to wash out a large amount of water and to address to the doctor. Protect from children, to avoid hit on integuments. Work in well aired room. Use protective gloves. color: white, black, grey.

We are offering acrylic sealant one-component elastic sealant intended for filling of cracks and sealing of the joints subject to weak deformations in and outside of a room. Has high adhesion to the majority of construction materials. Application: sealing and filling of cracks, breaks in walls and window sills, sealing of connections at installation of pasterboards, small repair of plaster before coloring, sealing of door boxes and window frames; sealing of elements from a gas concrete, sealing few deformation constructional joints between a brick, concrete, wood, etc. Usage: cut off cartridge top above a thread. Screw a nozzle and cut off it at an angle 45 ° in diameter equal to width of a crack. Place a cartridge in the gun and to put sealant. Smooth the sealant with the palette knife moistened in soap water. Sealant needs to be protected from water during 6 hours after application. Usage t°: +5°с-+40°с. Storage t°: 5°с-+25°с. Storage term: 12 months. color: white.

We are offering pu foam sealant application: montage foam can be applied to installation and consolidation of doors, windows, etc., for isolation of electroconducting, consolidation of seams and cracks, filling of cavities. Thermal stability of the hardened foam from - 40°с to +100°с. Before working the can is necessary to warm to room temperature. properties: montage foam has an excellent adhesion to concrete, plaster, wood, metal and synthetic materials, except for polyethylene and rubber. The foam’s yield at +20°с is about 55 liters. After hardening it is possible to paint, plaster, paste over with wall-paper. usage: before application shake up the can. A working surface must be clean and humidified. Remove a protective cap and attach the adapter. The working position of a can — «a bottom up». Fresh stains of foam are removed by the foam cleaner. attention: fire-dangerous! causes irritation at hit on skin and in eyes. Hold far from children. In case of contact wash out immediately by water. If unpleasant feelings remain, immediately address to the doctor. storage term: 18 months.

We are offering anti rust paint anticorrosive paint of the last layer for metal with the hammer effect, applied directly on a rust. A basis — a mix of epoxide updating of synthetic resin and an anticorrosive pigment. Application: high-permanent decorative protection for all metal and nonmetallic bases. Also possible to use for wooden surfaces. Suitable for coloring of metal containers, moldings, the agricultural and industrial equipment, details, mechanisms etc. Possible to put on not exfoliating rust. Usage: stir carefully before use. On surfaces earlier painted put 2 paint coats. Add 25 % of universal solvent. Put 2-3 layers with a difference of 15 minutes between layers. Keep an airbrush at 15-20 cm from a surface. The recommended pressure is 2 atm. Usage: carefully stir up before drawing, spray on a processed surface from distance 10-20 cm, the remains of liquid to remove with a dry fabric usage t°: +5°с-+40°с. Storage t°: +5°с-+30°с. Storage term: 3 years. colors: 20 colors in catalog.

We are offering polyurethane furniture 2-component (varnish + hardener) on an alkyd-polyurethane basis with special additives. Has the high transparency, allowing letting see tree structure, and also ease in drawing, durability and simplicity in the address. Only for internal application. Application: lacquering of furniture, etc. Internal wooden surfaces. It is put after application 2-component pu varnish filler. Usage: recommended to put at least 2 varnish coats with an interval from 1 to 6 hours. In case of need it is possible to dilute with universal solvent before achievement of the necessary consistence. (recommended 10-15 %). For drawing it is possible to use a brush, the roller or an airbrush. The best result are reached when drawing by means of an airbrush. Usage t°: +5°с-+35°с. Storage t°: +5°с-+30°с. Storage term: 3 years. color: transparent. Types: glossy, mat, semimat.