Chennai, Tamil Nadu, India
Our Products
| Internal Workzone Dimension (LxDxH) (mm) | 600x600x600 | 900x600x600 | 1200x600x600 | 1800x600x600 | 2400x600x600 |
| MOC (CABINET) | Wooden/CRC or PCGI/Stainless Steel | ||||
| NO. of HEPA Filter | 1 | 1 | 1 | 2 | 2 |
| Purity | Confirming to class 100 conditions | ||||
| Main filter | HEPA Filter (99.97% efficient at 0.3 micron parties) | ||||
| Prefilter | High efficiency prefilter. | ||||
| Illumination | Fluorescent Lamp 40W | ||||
| Sterilizing | UV Germicidal Tube. | ||||
| Utility | Gas/Air cock and multipoint 15/5 Amp. Electric socket. | ||||
| Supply Voltage & Frequency | AC 230V, 50/60 Hz | ||||
| Heating Plate Size | 250 x 300 mm | 250 x 400 mm | 300 x 455 mm | 455 x 605 mm |
| MOC (Body) | M.S. Sheet duly powder coated | |||
| MOC (Top Platform) | Mild Steel Plate OR Stainless Steel Plate (SS-304) |
|||
| Heating Element | Placed underneath for uniform heating duly insulated | |||
| Temperature Controller (OPTION) | Controlled through Energy Regulator Or Digital Temperature Indicator cum Controller |
|||
| Maximum Temp Range | Continuous Heating upto 370OC | |||
| Electricity Supply | 220 / 230 V AC, 50/60Hz | |||
| Inner Size | Rating |
| 5” x 5” x 10” | 2.50 KW |
| 5” x 5” x 12” | 3.00 KW |
| 6” x 6” x 12” | 3.30 KW |
| 8” x 8” x 12” | 4.50 KW |
For use from 50 Deg. C. to 110 Deg. C. or 300 Deg. C.
The inner chamber is made out of stainless steel while the outer is fabricated out of mild steel sheet and is finished in poweder coated. Glass wool insulation will be provided all around the chamber to minimize heat loss due to radiation. The door is made of stainless steel and provided with glass window for oven with 110 Deg. C. to view the samples placed inside.
The temperature is controlled by a capillary thermostat / or Electronic digital temperature controller vaccum gauge is also provided.
| Size |
| 200 x 200 |
| 250 x 250 |
| 250 x 300 |
| 300 x 300 |
Construction of double walled, with rigid framework and heavily insulated with glass wool, fresh air inlet and suitable exhaust will be provided. The interior will be finished with heat resistant aluminium and the outer is finished with attractive colour paint
Heating is accomplished by the aid of strip heaters made out of imported BDH Nichrome wire provided on the sides of the inner chamber to obtain maximum temperature.
In order to obtain uniform temperature, specially designed air circulation fans are fitted on the side of the unit. The design is such the unit will suck the hot air to pass over the trays and throw it one the sides where they will be reheated and recriculated to continue the cycle. A part of the air is to come out to throw out the moisture fan motor suitable for different size of driers are give below:-
Temperature: 50 to 250 Degree Celsius
| Capacity of no’s TRAYS | Working space |
| 12 No’s | 32.5 x 32.5 x 16.5 |
| 24 No’s | 32.5 x 32.5 x 32.5 |
| 48 No’s | 36.5 x 68 x 35 |
| 96 Nos | 80 x 68×35 |
APPLICATIONS
| Dimensions (mm) | 455x410x610 | 505x415x830 | 570x550x875 | 650x580x900 |
| Capacity | 112 trs | 171 ltrs | 280 ltrs | 340 ltrs |
| Volume | 4 Cuft | 6.1 Cuft | 10 Cuft | 12 Cuft |
| No. of shelves | 4 | 6 | 8 | 14 |
| MOC Outer | Powder coated CRC Steel Sheet | |||
| MOC Inner | Chamber and trays made of Stainless Steel (SS-304) | |||
| Type | Forced Convection Type | |||
| Freezer Compressor | Hermetically sealed air cooling compressor system | |||
| Temperature Range | 5OC to 60 OC | |||
| Accuracy | +1OsC | |||
| Controller (OPTION) | Fitted with Microprocessor based Digital Temperature Indicator- cum-controller with LED Display for Set Value (SV) & Process Value(PV). OR Microprocessor Based alphanumeric LCD Display Controller |
|||
| Humidity (Not Adjustable) | Created in a S.S. water reservoir fitted at the bottom to provide 90% to 95% +3%RH | |||
| Electric Supply | 220/230V AC, 50/60 Hz | |||
| MODEL | #SGDC-6 | #SGDC-6 | #SGDC-11 |
| Inner Dimensions of each Chamber (WXDXH) | 505x415x830 mm x 2 Chamber | 570x550x875 mm x 2 Chamber | 555x605x910 mm x 2 Chamber |
| Capacity | 342 ltrs | 560 ltrs | 616 ltrs |
| Volume | 12.2 Cuft | 20 Cuft | 22 Cuft |
| MOC Outer | Powder coated CRC Steel Sheet | ||
| MOC Inner | Chamber and trays made of Stainless Steel (SS-304) | ||
| No. of shelves | 6+6 | 8+8 | 14+14 |
| Temperature Range | Ambient +5 OC to 60 OC in one chamber And 5OC to 60 OC in other chamber for LED Display & 5OC to 60 OC in LCD Display | ||
| Controller | Fitted with Microprocessor based Digital Temperature Indicator-cum-controller with LED Display for Set Value (SV) & Process Value(PV). OR Controller with LCD Display (as per ordered) |
||
| Display | LED Display for set value and process value | ||
| Accuracy | +1 OC | ||
| Type | Forced Convection Type | ||
| Freezer Compressor | Hermetically sealed air cooling compressor system | ||
| Evaporator | Finned tube evaporator for faster cooling effects | ||
| Safety | Over temperature limiter switch prevents overheating | ||
| Insulation | High density PUF insulation for tighter temperature controls. | ||
| Humidity (Not Adjustable) | Created in a SS water reservoir fitted at the bottom to provide 90% to 95% +3%RH (Not Adjustable) | ||
| Electric Supply | 220/230V AC, 50/60 Hz | ||
CONSTRUCTIONAL AND SALIENT FEATURES
| Temperature range (in AC Room) | : | Ambient to -20oC or -30oC or -40 oC(as ordered) |
| Temperature Accuracy | : | +1oC |
| MOC Outer | : | Powder Coated CRC Steel Sheet |
| MOC Inner | : | Chamber and trays made of Stainless Sheet (SS-304) |
| Insulation | : | High Density PUF insulation for tighter temperature controls. |
| Temperature Control | : | Microprocessor based Digital Temperature Indicator-cum-Controller with in-built HI/LOW Temperature deviation alarm. |
| Display | : | Digital LED Set value (SV) & Process value (PV) |
CONSTRUCTIONS
| Dimension Inner | 300 x 300 x 175mm x 2 baths | 300 x 300 x 175mm x 3 baths |
| Capacity | 18 Ltr x 2 baths | 18 Ltr x 3 baths |
| Heater | 700 w x 2 baths | 700 w x 3 baths |
| Temperature Range | Ambient + 5OC to 99OC | |
| Temperature Accuracy | +0.1OC | |
| Temperature Uniformity | +0.1OC (Circulation) | |
| Controller | Microprocessor based PID Digital Temperature Indicator Cum Controller with an in-built Digital Timer | |
| Display | With digital LED Display for Set Value (SV) & Process Value (PV) | |
| Timer In-built | Digital Display in min./hrs. | |
| Alarm | End of cycle buzzer | |
| Material Bath | Seamless Stainless Steel (SUS 304) | |
| Material Case | Powder coated steel | |
| Safety Device | Over Temperature Limiter Switch prevents over heating | |
| Auto Control | With respect to temp. & time with in-built timer and buzzer alarm | |
| Electric Supply | 230V AC, 50/60 Hz | |
| Cover (Lid) | Made of Stainless Steel (SS-304) Option | |
| Internal Dimensions (LXBXD) | 275x275x150 mm | 405x300x150 mm |
| Capacity | 12 ltrs | 18 ltrs |
| Heating Load | 2.5 KW (2.0 KW + 0.5 KW) | |
| Temperature Range | Amb. +5OC to 100 OC | |
| Controller (OPTION) | Microprocessor based PID Digital Temperature Indicator-cum-Controller OR Microprocessor based PID Digital Temperature Indicator-cum-Controller with Automatic Digital Minute Timer which start Automatically when set/desired value of temperature is attained. When the set time period is over the heaters fet switched off automatically and unit sounds a Buzzer alerting the user that the process is complete. |
|
| Display | Digital LED with set value (SV) process value (PV) | |
| Temperature Accuracy | +0.5 OC | |
| Temperature Sensor | RTD (Pt-100) | |
| Shaking Speed | 40 to 140 cycles/minute | |
| Diffuser Shelf | Heater protective perforated cover made of stainless steel | |
| Regulator | Solid state electronic relay with protective heat sink | |
Inn SS 304, outer M.S. powder coated surface. Shaking speed 40 to 120 rpm with ss top cover.
| Capacity | Temp. Range | Temp.Control | Speed control | Accuracy |
| 9 Flasks of 100 ml. | 5◦C above ambient to 90◦C | Digital | Regulator |
+ 0.5◦C |
| 12 Flasks of 250 ml. | -do- | -do- | -do- |
+ 0.5◦C |
Experience the latest technology of stirring with MAC Ceramic Coated Magnetic Stirrer. Equipped with LED display for set and actual temperature. Available with external PT-100 sensor (optional) for precise control of temperature with on accuracy of 1C. Separate safety circuits and warning indications, for over temperature even in the switch OFF condition.
| Dimensions of Works Plate | Ø135 | 184x184mm |
| Plate Material | Ceramic Coated | Glass Ceramic |
| Stirring Cap. [H2O], L | 2 – 3 Ltrs. | 5 Ltrs. |
| Speed Range / Display | 100 – 1500 rpm/LED | 0 – 1500 rpm/Scale |
| Heating Output (W) | 500 watts | 1000 watts |
| Heating Temp. Range (?C)/Safety Cut Off | Ambient to 280oC/320oC | Ambient to 550oC/580oC |
| Temp Display | LED | LED |
| CAPACITY | RATING |
| (a) 50 ml or 100 ml | 80 Watts |
| (b) 50 ml or 100 ml | 200 Watts |
| (c) 50 ml or 100 ml | 300 Watts |
| (d) 50 ml or 100 ml | 450 Watts |
| (e) 50 ml or 100 ml | 500 Watts |
| (f) 50 ml or 100 ml | 600 Watts |
| (g) 50 ml or 100 ml | 2×600 Watts |
| (h) 50 ml or 100 ml | 3×650 Watts |
| Capacity | 2.0 ltrs/hr | 4.0 ltrs/hr | 6.0 ltrs/hr | 8.0 ltrs/hr | 10.0 ltrs/hr |
| Load | 1.50 KW | 3.00 KW | 4.00 KW | 5.00 KW | 6.00 KW |
| Power Supply | 220/230 watts AC supply | ||||
APPLICATIONS & CONSTRUCTIONAL FEATURES
| Capacity | 2.0 ltrs/hr | 4.0 ltrs/hr | 6.0 ltrs/hr | 8.0 ltrs/hr | 10.0 ltrs/hr |
| Load | 1.50 KW | 3.00 KW | 4.00 KW | 5.00 KW | 6.00 KW |
| MOC (Outer & Inner) | Stainless Steel (S.S.-304 grade) argon arc welded | ||||
| MOC (Condenser and Top) | Stainless Steel (S.S.-304 grade) argon arc welded | ||||
| Insulation | High grade glass wool insulation | ||||
ISLAND BENCHESare suitable for chemical testing in a Laboratory consists of assembly of combination of storage modules with drawers & shutters or only shutter with shelf inside and Tops of selected material. The main features of the work bench are as under:
Choice Of Sizes:
2400mm L X 1500mm W X 900mm H
3000mm L X 1500mm W X 900mm H
3600mm L X 1000mm W X 900mm H
WORK BENCHESare suitable for chemical testing in a Laboratory consists of assembly of combination of storage modules with drawers & shutters or only shutter with shelf inside and Tops of selected material. The main features of the work bench are as under:
Table Top
Made of Jet Black Granite Imported ceramic, S.S. or any Selective (Special) Surface.
Table Frame
Made of square steel Tubes with epoxy Powder Coating finish.
Underbench Storage Modules
Made from best quality C.R.C.A. Steel sheets of specified thickness having drawers and shutters and shelves as per requirement. Drawers are running on Derlin roller slide channels. Shutters are fitted with 90 Degree concealed hinges of best quality. Drawers and shutters are fitted with best quality locks and two tone S.S. Handles. Shutter and Drawer fronts are of sandwitch construction with polyurethane packing & gaskets to reduce noise. Complete storage module units is finished with powder coating.
Reagent Racks
Made from best quality C.R.C.A steel sheets of specified thickness with two tier shelves and a service panel at the middle for electrical and other service lines. Complete Rack is finished with epoxy Powder coating.
INSTRUMENT BENCHESare Suitable for working with instruments in a Instrument lab. The height of Instrument benches is 750 mm (sitting ht) and leg space is provided in between. Keyboard drawer and CPU shelves are adding the facility to work with computerized instruments.
Electrical trunking with approved make switch/sockets are provided optionally.
Standard Sizes Available:
Length : 1500 mm OR 1800 mm
Width : 750 mm OR 900 mm
Height : 750 mm
SINK BENCHESare suitable for Laboratory consists of assembly of combination of storage modules with shutters with shelf inside and Tops of selected material. The main features is to facilitate the Sink along with the water tap integrated with the work bench.
