Jaipur, Rajasthan, India
Our Products
A component of machine that seals lubricants, an oil seal is constructed of rubber, garter spring, and an internal case. While preventing the leakage of lubricants, water, or chemicals, an oil seal also prevents the entry of dust and dirt into a machine.
HYDRO-BAG is a dilatation hydraulic cushion that consists of two sheets of high tensile steel coupled with the most modem techniques that expands under the pressure of water. permitting a maximum dilatation of 6 inches to 10 inches. May easily inserted into the wire saw cut.
Benefits
Ground Engaging tools i.e. Tooths, Points, Adaptor, Grader blades, End bits, Grouser plates, Track Bolts and Nuts, Locks being the most wearable parts, need to be a product par excellence. ITR Italy a multi product giant partners us as supplier of premium product range, perfect in fitment & metallurgy. We are authorized importers of ITR Italy products and distributing the same in complete Indian sub continent. We maintain proper stock and range to cater diversified equipment population. The distribution network is on continuous expansion and expression of interest from parties is welcome.
ITR Ground engaging tools are produced in Alloy steel and Heat Treated according to OE requirements to ensure consistency of Quality, Durability and Strength under the toughest working conditions. The range of products covers all type of Construction equipment.
High carbon content steel wire / rods which are extra hard are easily cut by special alloy steel drop forged jaws. These heavy duty bolt cutters can easily cut hard wires. Jaws will be blackened and handle in shiny yellow colour.
Crimping tool is used to crimp lock and sleeves on the diamond wire saw chain.
| TECHNICAL SPECIFICATIONS | |
|---|---|
| GRD95(Ring Type) | 10mm-95mm Dies R1-R10 (9 Sets) |
| GRD95(Hex) | 10mm-95mm DiesH10-H95(7sets) |
| GRD185(Ring Type) | 100-185mm Dies R1-R13 |
We are manufacturing high tensile and flexible galvanized inner wire rope with perfect lay and uniform dia 4.8mm for marble and granite quarrying for optimum life, which is suitable for accessories of inner dia 5mm to 5.1mm
Our special developed High Tensile Inner Carrier Steel Wire Rope Available in standard Dia. 4.8mm(+/-0.05mm) for multi application like; Marble and Granite Quarrying, Concrete cutting, Marble and Granite Block Squaring(Dressing) diamond wires for Optimum life and more out put. The Rope is available in standard length 500 Mtrs and 1000 Mtrs per Wooden Spool.
The same Rope is used for above said multi applications for Springs mounted assembled diamond wires for marble cutting, Rubber coated diamond wires and Plastic coated diamond wires for granites and concrete cutting.
Joint sleeve has the main function of the crimping like, Steel lock in the diamond wire. Joint is used for crimping and holding the both ends of the inner carrier wire. We produce two types of joint sleeves from high quality mild steel materials and high purity copper materials.
The Joint Sleeves are made from Mild Steel tubes with electroplating on surface to avoid rust and weather effect and from Copper tubes to avoid breaking problem and best crimping result during diamond wire assembly with some standard sizes are as follow.
Rubber ring is a part of diamond wire saw machine which is fixed on the aluminium wheel to rotate the diamond chain in its oval rotation.
Spring is the vital part of the diamond wire, which has the main function of shock absorb in diamond wire during cutting activity. We are manufacturing special high quality tempered and both ends smooth grinded springs from high carbon steel wire with electroplating on surface to prevent rust, Which gives optimum life and excellent cutting speed of diamond beads.
We bring forth high quality Diamond Wire Saw Beads that are specially manufactured to meet the demands of the Stone Sector. Diamond Wire Saw Beads are well appreciated for its durable finish and high strength, among the clients. Diamond Wire Saw Beads which makes them efficient enough in cutting Limestone, Sandstone, Granite, Concrete, and Asphalt.This has attracted them to place repeated orders.
Wire chain are avilable for various marbles and limestone which is used with traditional assembly with spring and washer. We offer different type of chain for abrasive-hard and soft-medium hard marble at very ease cutting speed with good life. We normally cater its product to export market.
Our wires can get you the optimum performance at quarry operation which saves fuel or electricity by giving free cutting with maximum life.
Pneumatically operated Drill capable of Drilling in both DOWN THE HOLE & JACK HAMMER modes-ideally suitable for drilling lead holes for DIAMOND WIRE CUTTING of decorative MARBLE, GRANITE ROCKS etc. Machine has been specially designed for Precision drilling of matching holes and ability to drill holes in both VERTICAL & HORIZONTAL positions. A ball joint is provided at the bottom of the Mast to facilitate Precision alignment for matching holes. Provided with one spike & two Anchoring Rods & Adjusting screws to maintain perfect rigidity during drilling. Light in weight, machine can be easily dismantled into four SUB-ASSEMBLIES- each weighing not more than 50 kgs- thus ensuring easy portability and repositioning.
Special Features :
The rock drills are designed for bench drilling, secondary drilling and smooth blast drilling. The small size makes them ideal for work in confined spaces. Because of its light weight the RH 571 is best suited for smaller jobs. The RH 658 is slightly heavier and more powerful and can handle greater hole depths. The design of RH 572E combines light weight with extra comfort for the operator, thanks to the vibration dampened handles and the efficient silencer.
Features & benefits
Hose clamps are made of malleable cast iron forging and grip the hose effectively. They are made to fit the hose couplings and hose nipples. The clamps offer minimum resistance when the hose is being dragged along the ground.
Hose Jointing Nipples are made of Steel with a maximum bore. For the sizes 1 and less single locking edge at both sides and double locking edges are provided for higher sizes for using double hose clamps.
More Airline Accessories are also available like Claw Coupling Male & Female, Rubber Washer, etc. All these items are available in wide range of sizes.
Rock Drill Hose Pipe has meticulously selected yarn braided & fused between the inner & outer layers thus offering better resistance to withstand higher working pressures without problem of splitting. A unique feature is its transparency which allows one to have an eye on the functioning inside.
The hose is resistant to several chemicals, alkalis, light acids & oils. It can withstand all climatic conditions thus proving as a better choice than conventional rubber hoses. A wide range of braided P.V.C hoses are available for use in various fields.
Applications
A hand tool is any tool that is not a power tool that is, one powered by hand (manual labour) rather than by an engine. Some examples of hand tools are Bolt Cutters, Crimping Tools, garden forks, secateurs, rakes, hammers, spanners, pliers, screwdrivers and chisels. Hand tools are generally less dangerous than power tools.
