Bimbim Store

Medan, Sumatera Utara, Indonesia

features : - tamiya 1/10 jeep wrangler cr01 kit 58429 - chassis: cr-01 dedicated crawler chassis with heavy duty ladder frame pressed aluminum channels and resin cross members - drive: four wheel shaft drive - motor: 540 size - ball bearings: full set included - shocks: oil-filled, compressed via pushrods and rocker arms - gearbox: planetary type with 20 tooth pinion gear for a 40.5:1 gear ratio, separately available 16 - 25 tooth pinion gears for gear ratios ranging from 50.6:1 - 32.4:1 - transmission: single speed - tires: rock crawler type 4.9" (125mm) diameter, 2.2" (56mm) wide with foam inserts - wheels: plastic 3-piece beadlock 2.8" (71mm) diameter, 1.4" (35.8mm) wide, black in color - body: lightweight clear polycarbonate - bumper: high impact front plastic - suspension: four link coil spring front and rear - differential: planetary gear - steering: adjustable, direct link with servo saver requirements : - radio: 2-channel with 1 servo - electronic speed control: - radio batteries: (8) aa size - battery: 6-cell stick pack w/standard tamiya connector - charger: ac/dc timed or peak for 6-cell battery - misc. items: paint, building and track equipment model : tamc0856 by tamiya price: $275 (for moq order with 10 units)

specifications : - vehicle- - length: 32.2" (817mm) - front width: 18.1" (460mm) - rear width: 18.9" (480mm) - height: 10" (255mm) with 1g, 11" (280mm) with 0g - ride height: 3" (76mm) - suspension travel: front 3.7" (95mm), rear 3.9" (100mm) - weight: 21.3 lbs (9.6kg) without fuel - wheelbase: 22.4" (570mm) wheels on-center front-to-rear _ - front track: 15.5" (395mm) - rear track: 15.7" (400mm) outer edges of wheels - gear ratio: 8.382:1 - tires- - front: 2.4" (60mm) x 6.7" (170mm) - rear: 3.1" (80mm) x 6.7" (170mm) - body- - length: 22.9" (581mm) - width: 8.8" (224mm) at rear wheels (widest point) 3.25" (82mm) ahead of front wheels (thinnest point) - height: 4.75" (121mm) at highest point model : hpic1610 by hpi price: $420 (for moq order with 10 units)

features : - tamiya 1/14 flatbed semi trailer kit 56306 - aluminum ladder chassis - solid axle suspension - rear double-axle drive mechanism - metal coil shocks - semi-pneumatic tires - servo controlled, constant-mesh, 3-speed gearbox drive train - bevel gear differential - electric rs-540 motor - chrome wheels radial tires - styrene-plastic body (molded in white) - chromed grill, bumper, fuel tanks, exhaust stacks and steps - coupler unit for semi-trailer (trailer not included) - accessory completion guide) specifications : - length: 24.80in (630mm) - width 7.32in (186mm) - weight: 6.83lbs (3100g) - low (1st) gear ratio: 1:32.49 - middle (2nd) gear ratio: 1:17.66 - top (3rd) gear ratio: 1:10.66 requirements : - four channel radio, with two standard size servos (1-steering, 1-shifting) - electronic speed control with reverse - 7.2v flat battery pack - battery charger - paint for body - tools and cement model : tamc6314 by tamiya price: $215 (for moq order with 10 units)

features : - tamiya ford f-350 high-lift kit 58372 - chassis: ladder type, steel channel and resin cross members - drive: four wheel shaft - motor: 540 size - bushings and ball bearings - shocks: four, friction type aluminum bodies - gearboxes: closed - differentials: resin case with planetary gear die-cast gears - transmission: 3-speed with slipper clutch with slipper clutch to protect gears during tough off-road running - body: rigid plastic molded white in color, window set, plated plastic bumpers, roll bar and body trim, plastic light lenses - tires: lug pattern 3.7" (94mm) diameter, 1.2" (32mm) wide - wheels: 6-spoke brushed chrome 1.9" (48mm) diameter, .90" (23mm) wide - bumper: front, brushed chrome finish - suspension: rigid leaf type - camber tie rods: non-adjustable - caster: adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis - steering: bell-crank type with servo saver, 4-wheel steering can be added by installing rear axle tension rod specifications : - vehicle- - length: 20" (508mm) - width: 8.5" (216mm) - height: 10.6" (270mm) - weight: 6.8 lbs (3.1kg) - gear ratio: low gear 1:64.39, 2nd gear 1:35.20, top gear 1:21.14 - tires: 3.7" (94mm) diameter, 1.2" (32mm) wide - body- - length: 18.75" (476mm) - width: 7.25" (184mm) - height: 5.1" (130mm) package contents : tamiya ford f350 hi-lift truck with friction shocks, 540 motor, molded white body, window section, body trim, decals, plastic light lenses, tires, wheels, 16 tooth pinion gear, 54 tooth spur gear molded plastic surfboard with different marrking options, instructions requirements : - radio: 4-channel with 2 servos - radio batteries: (8) aa size - speed control: electronic with reverse - battery: 6-cell stick pack with standard tamiya connector - charger: ac/dc timed or peak for 6-cell battery - misc. items: paint, building and track equipment model : tamc0196 by tamiya price: $250 (for moq order with 10 units)

features : - tamiya 56323 tractor truck scania r620 6x4 highline - chassis: ladder frame with aluminum channels and resin cross members - cabin: tilt forward operation just like full-size truck, removable fenders to depict a low carrying load - drive: shaft driven from front mounted motor to rear axles with are equipped with differentials - motor: rs540 - transmission: three speed servo controlled constant mesh - suspension: die cast metal front axle and reinforced resin rear axles float mounted on metal leaf springs and coil spring shocks - cabin: molded plastic, white in color tilts forward separately from fenders, clear plastic windows, separate grille, mirrors and other accessories add to realism - wheels: chrome plated plastic - tires: ten, treaded rubber construction specifications : - length: 20.5" (520mm) - width: 7.4" (187mm) - height: 11.5" (293mm) - gear ratio: low gear 1:32.49 - 2nd gear 1:17.66 - 3rd gear 1:10.66 requirements : - radio: 4-channel - servos: two standard size for steering and shifting - electronic speed control: forward and reverse - battery: 6-cell stick - battery charger: timed or peak for 6-cell battery - paint, building & track equipment model : tamc0660 by tamiya price: $180 (for moq order with 10 units)

features : - tamiya 58489 avante 2011 kit - chassis: 0.08" (2mm) thick carbon fiber, double deck configuration - drive: four wheel shaft with pin-secured wheel axles - body: polycarbonate with wing and chassis fairing - motor: 25 turn brushed - electronic speed control: teu-104bk, tamm4541 - shocks: oil-filled with gold colored cylinders and bottom caps for easy maintenance - shock stays: 0.14" (3.5mm) thick carbon fiber - suspension: front and rear multi-link double wishbone, adjustable metal arms with radius arm protectors and rear anti-roll bar, - differentials: front and rear planetary, center ball diff - tires: high-grip pin spike with foam inserts - wheels: front, 1" (25.4mm) wide, 2.2" (57mm) diameter rear, 1.4" (35.5mm) wide, 2.2" (57mm) diameter, also four 1.4" (35.5mm) wide, 2.2" (57mm) diameter cam-loc wheels with wheel caps - caster: adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis - caster: adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis - steering: bell-crank type with servo saver and adjustable linkage specifications : - vehicle; - length: 16.5" (420mm) - width: 9.4" (240mm) - height: 4.5" (140mm) - wheelbase: 10.2" (260mm) - tread: 7.9" (200mm) distance from wheel centers, left to right - gear ratio: 1:8.33 - minimum ground clearance: 1.6" (40mm) - weight: 2.9lbs (1300g) - body: - length: 13" (330mm) - width: 5.9" (150mm) - height: 2.4" (61mm) contents : tamiya avante 2011 off-road buggy kit with esc, 25t motor, oil-filled shocks, 22 tooth pinion, set of tradional buggy wheels, set of cam-loc wheels, spike tires with inserts, body, decal sheet and instruction manual requirements : - radio: 2-channel with one steering servo - battery: 6-cell stick pack with standard connector - charger: ac/dc timed or peak for 6-cell battery model : tamc8489 by tamiya price: $250 (for moq order with 10 units)

features : - tamiya 23655 1/14 r/c tractor truck 3-axle reefer semi-trailer - aluminum frame and resin crossmember with durable abs panel construction - refrigeration unit detail (non-functioning) and fully opening tailgate - rear bumper fitted with realistic led taillights - storage boxes under trailer which can be used to store the included chocks and hide the battery box and switches for separately available motorized support legs - each axle supported with its own leaf springs, friction dampers and suspension arms - metal leaf springs feature equalizers just like a full-size truck - manual pull-down support legs retract automatically when connected to tractor requirements : attaching to tamiya 1/14 scale semi tractor model : tamc0659 by tamiya price: $535 (for moq order with 10 units)

features : - tamiya 42106 1/10 trf416 chassis kit - chassis: 0.09" (2.25mm) thick lower deck with 0.08" (2mm) thick upper deck, - drive: four wheel belt drive with front one-way, center direct drive and real ball diff - transmission: - shocks: oil filled with " ( mm) thick shock towers - wheels: white dish " ( mm) diameter, " ( mm) wide - differential: - pinion gear: - ball bearings: - spur gear: - suspension: - shocks: - bumper: front, constructed of foam - steering: bellcrank type with servo saver - caster: adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis - camber: adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle contents : tamiya trf416 touring car chassis requirements : - radio: 2-ch with one standard servo - speed control: - battery: 6-cell saddle pack - radio batteries: 8-aa for transmitter model : tamc1067 by tamiya price: $335 (for moq order with 10 units)

features : - tamiya 1/10 toyota tundra high-lift kit 58415 - the durable ladder frame chassis features steel channels and resin cross members for high strength. - equipped amidships for a lower center of gravity is a 3-speed transmission allowing gear changing and realistic low speed driving. - propeller shafts and slipper clutch efficiently transfer power to all wheels on any type ofterrain. - powered by a type 540 motor. (included) - the full-time 4wd guarantees road hugging performance. - the differential can be locked in place to enable improved performance on any surface it may face. - the newly designed chrome plated wheels with bead lock rings precisely catch the essence of the pick-up truck. because the tundra is fitted with similar side-block tires like the f-350 (58397), it is possible to change them with any other cross country tires. - 4-channel transmitter, esc, and running battery & charger are separately available. - use ts sprays to paint your tundra the desired color - loading the separately available pick-up truck multi-function unit (item 53957) mfc-02 will further enhance the truck and put a wide range of realistic light, sound, and vibration effects at your fingertips. - for dressing-up the model, snow boards (2) and roof racks are included. requirements : - radio: 2-channel with servo(s) - battery: 6-cell flat with standard tamiya connector - charger: ac/dc timed or peak for 6-cell battery - paint: ps for polycarbonate/ts for abs - misc. items: building and track equipment model : tamc0856 by tamiya price: $275 (for moq order with 10 units)

features : includes: tq 2.4ghz high-output radio system with traxxas link™, power cell 3000 mah nimh 8.4v battery pack, and charger 70+mph top speed on 8000mah 3s lipo 45+mph with the included 7-cell nimh sleek new-style body on bandit that allows body removal without removing the wing velineon extreme brushless power system waterproof, high-torque digital steering servo steel internal transmission gears rubber-sealed ball bearings hd 4mm steel turnbuckles with heavy-duty rod ends precision metric hex hardware pre-glued tires on sinister black-chrome wheels technical specs : type: electric 2wd stadium truck scale: 1/10 length: 17.5 in (445mm) width: 12.25 in (311mm) wheelbase: 11.38 in (289mm) weight: 3.7 lbs (1.7kg) chassis: composite nylon modified tub drivetrain: 2wd motor or engine: velineon 3500 brushless speed control: vxl-3s electronic speed control radio: tq 2.4ghz high output with traxxas link gear pitch: 48-pitch wheel size: 2.8" kit/rtr: rtr model : tra3707 by traxxas price: $195 (for moq order with 10 units)

features : t-lock remote locking differentials independently lock and unlock the front and rear differentials from your transmitter transmitter-operated high-low range transmission authentic and functional exocage body system brilliant 10 led lighting system huge 7-inch canyon at tires 3.8-inch geode wheels with 17mm hex and beadlock-style sidewall protectors titan 775 high-torque motor waterproof electronics for running in water, mud and snow smooth center skid plate sheilds the driveline dual digital waterproof steering servos deliver 250 oz-in combined torque & 0.16 sec transit time 17mm aluminum hex hubs and nuts hard anodized, teflon coated gtr shocks with titanium nitride shafts tq 2.4ghz 4-channel radio system and power cell 3000mah nimh 8.4v battery packs scalable battery compartments accept 6 and 7 cell sport packs to lipp power evx-2 16.8-volt fwd/rev electronic spped control with patent pending training mode battery cooling vents brushless ready two-speed transmission with metal center idler gear hex hardware throughout now includes (2) 7-cell nimh 3000mah traxxas battery packs technical specs : type: 4wd off-road scale: 1/10 length: 22.17 inches (563mm) width: 18.48 inches wheelbase: 14.84 inches (377mm) weight: 175oz (4.96kg) chassis: molded tub/composite nylon suspension: ultra-long-travel suspension tire type: canyon at (7.1" x 3.8") motor or engine: titan 775, high-torque speed control: evx-2 forward/reverse/brake radio: 4 channel servos: 125 oz.-in, .16-second speed: 20+mph gear pitch: 32-pitch wheel size: 3.8 inch kit/rtr: rtr shock type: high-tech gtr shocks body: suv-style experience level: intermediate model : tra5607 by traxxas price: $340 (for moq order with 10 units)

• Model NumberHPID61LL
• Brand NameBaja 5SC

features : - hpi 105231 rtr baja 5sc w/2.4ghz - chassis: black anodized 4mm 6061-t6 aircraft grade extruded and cnc milled, chassis guards, extended upper roll cage for spark plug protection - drive: rear wheel gear drive - engine: 2 cycle 1.6 cu in (26cc) gasoline with pull starter, dual element foam air filter, primer, choke, kill switch and built in cooling fan - exhaust: steel muffler routed to rear of vehicle with aluminum pipe - fuel tank: 24oz (700cc) - radio: 2.4ghz spread spectrum dsss with failsafe function that prevents low voltage runaways, steering dual rate, servo reversing switches and flashing led low battery warning, sealed radio box - steering servo: water resistant sfl-11mg2 metal gear ball bearing equipped - receiver battery: 3000mah, five sub c-cell 6v nimh rechargeable pack with standard connector - clutch: high performance 8, 000 rpm - ball bearings: full set included, 23 total - shocks: vvc/hd oil-filled coil over design with 6mm diameter shafts 16 hole rear pistons with sealing ring for consistent damping - shock towers: composite with modified rear brace for increased suspension travel - transmission: 19 tooth transmission top gear for quick acceleration and top speed, all gears are metal - rear dogbones: metal construction with rubber boots - gearbox: sealed - differentials: viscous torque control can be tuned using different weight diff oils, hardened metal planetary gears - brakes: dual disc ventilated steel/aluminum hybrid rotor and semi- metallic pads - tires: hb rodeoo short course with asymmetric tread pattern, sticky rubber compound and wide grooves for the right mix of sliding and gripping - wheels: 10 spoke with heavy duty beadlock rings - body: 0.08" (2mm) thick polycarbonate truck body pre-painted black or white with new body mounting system featuring eight nylon mounting points - bumpers: bar style front and rear - rear wing: molded nylon with integrated rear body brace - roll cage: baja style high impact nylon protects engine and body from crash damage - suspension: long travel, fully adjustable with turnbuckles, double wishbone, front and rear sway bars - caster: adjustable front & rear caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis, new rear hubs allow toe-in adjustments of 0, 1, 2, 3 and 4° - camber: adjustable, front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle - warranty: 2-year limited through manufacturer beginning at date of purchase model : hpid61ll by hpi price: $720 (for moq order with 10 units)

features : - team associated 90006 sc10 4x4 rtr pro comp 2.4ghz - chassis: composite modular construction with low cg and low polar - moment design - motor: reedy 550 sl brushless - electronic speed control: water resistant xp sc700 with cooling fan and removable tray for easy clean up and maintenance - radio: xp3-ss 2.4ghz 3-channel with s2008mg high-torque metal-gear steering servo - drive: hybrid belt/gear drive, four wheel 5mm heavy duty belt system with external tension adjustment, cvas with captured drive pins and heavy duty 6mm alloy axles - slipper clutch: decoupled design allows front and rear wheels to slip independently for greater traction and stability under bumpy conditions - differentials: sealed, fluid filled, 32 pitch planetary gears - shocks: oil-filled aluminum body 13mm big bore with low friction x- ring seals - body: trimmed with lucas oil paint scheme - receiver box: sealed, water resistant - steering: ball bearing with adjustable steering stops - ball bearings: full set included - wheels: 12mm hex drive kmc replica - tires: - caster: adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis - camber: adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle specifications : - vehicle- - length: 21.6" (550mm) - width: 11.5" (293mm) - weight: 6.1lbs (2775g) weight will vary slightly depending on electronics used - wheelbase: 12.9" (327mm) - internal gear ratio: 2.57:1 - body- - length: - width: - height: contents : rtr sc10 4x4 short course racing truck with painted body, esc, brushless motor, 2.4ghz radio w/steering servo requirements : - aa batteries: eight aa - battery: 6-cell nimh or 2-cell lipo with deans ultra plug - battery charger: to match selected battery - building and track equipment model : 90006 by team associated price: $250 (for moq order with 10 units)

the extreme power of the trx 3.3 racing engine™ resonator™ blue-anodized aluminum tuned pipe front & rear sway bars for increased stability asphalt-hugging anaconda™ performance tires mandatory trick wheelie bar aggressive new body graphics 0-60mph in 4.2 seconds 65+mph top speed now includes battery and charger for the ez-start, extra glow plug and fuel bottle best in class suspension travel, 12mm more than other 2wd racing trucks adjustable internal two-speed allows unmatched acceleration and top speed without compromise sealed gearbox protects the two-speed and other sensitive transmission components from dirt and rocks sealed, limited-slip gear differential is fully tunable with standard silicone differential oils unique bellcrank steering system geometry that completely eliminates bump steer revo®-style torque-control™ slipper clutch uses semi-metallic pads and heat-dissipating finned aluminum alloy pressure plates for smooth linear engagement and consistent traction control the semi-metallic brake disk provides smooth stopping power and virtually eliminates fade caused by heat build-up the low-profile 75cc fuel tank is mounted in the center of the chassis to promote superior chassis balance and handling dynamics the trx 3.3 racing engine is mounted in the middle of the chassis allowing near perfect side-to-side weight distribution double-shear connections are used on critical suspension linkage to prevent separation in a collision true constant-velocity u-joint driveshafts use rubber seals to maintain smooth, trouble-free performance tough, 3mm thick 6061 aluminum chassis plate is fully countersunk on the bottom, including the engine mounting screws removable roll hoop helps protect critical chassis components and serves as a convenient carry handle precision gtr™ (revo®-style) shocks with composite bodies provide smooth, consistent damping performance integrated “buggy style” dirt guards join with the body to form a tightly sealed barrier against dirt and rocks enclosed radio box protects sensitive electronics from dirt and fuel spills jato’s exclusive 2-position receiver battery mounting (mid and rear) provides additional tuning options precision metric hex hardware is used throughout jato offers full suspension adjustability including caster, camber, toe, anti-squat, ride height, weight bias, and roll-center set-up dvd and full-color manual are included technical specs : length: 16.53 inches (420mm) width: 12.87 inches (327mm) wheelbase: 11.22" long (285mm), 11.14" short (283mm) weight: 83.03oz (5.19lb) (w/4aa in rear + wheelie bar)(no fuel) chassis: 3mm plate, 6061-t6 aluminum tire type: anaconda 4.1 inches (105mm) motor or engine: trx 3.3 racing engine speed: 65+mph wheel size: 2.8" all-star mirror-chrome shock type: 3.43 inches (87mm), gtr aluminum fuel tank capacity: 75cc model : tra5907 by traxxas price: $227 (for moq order with 10 units)

features : - hpi 105878 e-firestorm 10t flux rtr - chassis: composite nylon tub 3mm (0.12") thick - drive: rear wheel with steel dogbones and axles - motor: hpi flux vektor 4800kv brushless with neodymium magnet, oversized sealed ball bearings, four pole rotor for more torque and triple insulated windings for long life - electronic speed control: hpi flux vapor, waterproof, handles 3s lipo battery, linear torque braking for better control on corner entry sensorless tecnology and cross cut aluminum heat sink - radio: 2.4ghz with high-torque steering servo, failsafe and waterproof receiver box - battery: 8.4v plazma 3300mah nimh with deans female ultra plug - battery charger: ac wall type with standard to deans adapter - transmitter batteries: eight aa - wheels: chrome finish split 5 2.0" (51mm) wide, 2.2" (55mm) diameter with 12mm aluminum hex adapters compatible with all hpi 1/10 scale vehicles - front tires: front line 4" (102mm) diameter, 2.1" (53mm) wide - rear tires: ground assault 4" (102mm) diameter, 2.1" (53mm) wide - transmission: low profile 2.6:1 ratio with all metal gears and dual pad slipper clutch - shocks: four silicone oil-filled composite body - suspension: assembled with captured hinge pins, geometry and components from firestorm 10 - differential: sealed planetary type - spur gear: 87 tooth 48 pitch - pinion gear: 19 tooth 48 pitch - body: pre-painted and trimmed dsx-2 - caster: adjustable front and rear toe-in, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car - camber: adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle with dual pad slipper clutch - steering: bell crank with cam-type servo saver steering arms laydown steering servo position - warranty period: two year limited specifications : - vehicle- - length: 16.7" (425mm) - width: 12.8" (325mm) - height: 5.8" (147mm) at rear wing - wheelbase: 11.4" (289mm) adjustable - body- - length: 16" (406mm) - width: 6.5" (166mm) ahead of rear wheels (widest point) - (141mm) ahead of front wheels (narrowest point) - height: 3.8" (96mm) - thickness: 0.020" (0.5mm) contents : hpi firestorm 10t flux stadium truck, brushless motor, esc, 8.4v 3300mah battery, wall charger, six aa batteries, 2.4ghz radio with steering servo, front line front tires, ground assault rear tires, dsx-2 painted body and instruction manual requirements : building and track equipment model : hpid78a by hpi price: $180 (for moq order with 10 units)

features : - venom 8502 1/10 gambler sc truck brushless rtr red - chassis: composite - drive: rear wheel with vcd captured pin system - motor: v540 3300kv brushless - radio: vr3s 2.4ghz 3-channel with dual rate steering, throttle and steering epa, steering servo, charging jack and sealed radio box - esc: 80a waterproof, fully programmable & low voltage cutoff for - lipo battery protection - battery: 7-cell 3000mah nimh hump pack with ec3 connector - battery charger: 110v wall type - battery compartment: accommodates 6, 7, and 8 cell nimh packs and - 2-3 cell lipo packs - shocks: composite body, oil filled - suspension: racing type with fully adjustable geometry - differential: four planetary bevel gear type - transmission: mordrive system allows adjustment of the center of gravity by changing the position of the transmission from mid motor to rear motor, externally adjustable slipper clutch - body: venom gambler polycarbonate racing body painted red - bumpers: scale tube front and rear with side nerf bars - wheels: 3-piece beadlox with griplox inserts, 2.2" (55.9mm) outer diameter, 3.0" (76mm) inner diameter - tires: pro comp at, ultra soft v1 compound with beadlox tire bead 1.6" (41mm) wide, 2.4" (61mm) diameter with foam inserts - caster: adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis - camber: adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle - venom warrants this truck to be free of material and workmanship defects when new. if a component is defective or was not correctly made, venom will, at its sole discretion, repair or replace it free of charge within 90 days from date of purchase or within 30 days for all electronic components. this warranty does not cover wear and tear, crash damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use. specifications : - vehicle- - length: 21.73" (552mm) - width: 11.65" (298mm) - roof height: 7.89" (200.5mm) - wheelbase: 13.01" (330.5mm) - ground clearance: 1.51" (38.5mm) - body- - length: 21.5" (547mm) - width: 10.1" (257mm) behind rear wheels, narrowest point - 12" (305mm) at rear wheels, widest point - height: 5.75" (146mm) model : vnrc8502 by venom price: $270 (for moq order with 10 units)

features : integrated dual battery compartments with quick release battery doors scalable battery compartments from sport packs to brutal 6s lipo power dual digital waterproof steering servos deliver 125oz-in of torque & 0.16-sec transit time hard-anodized teflon-coated shock bodies with tin coated shock shafts tq 2.4ghz dss radio system sealed pivot ball suspension sealed limited slip differentials hex hardware throughout talon tires on 3.8" black chrome gemini wheels castle creations mamba monster features rated for 6s lipo operation low-voltage detection for lipo use 6.5mm gold-plated bullet connectors castle link compatible for tuning via computer using usb cable 5mm rotor shaft now includes two 7-cell nimh 3000mah traxxas battery packs model : tra3908 by traxxas price: $365 (for moq order with 10 units)

features : includes: tq 2.4ghz high-output radio system with traxxas link™, ez-start battery pack, charger, and more trx 3.3 racing engine with ez-start® electric starting tall 6.3" all-terrain maxx®-sized tires mounted on 3.8" mirror-chrome hurricane™ wheels maxx® resonator™ dyno-tuned dual-chamber pipe sealed, tunable limited-slip differentials digital high-torque steering servo delivers revo®-spec forward-only, autoshifting two-speed transmission torque-control slipper & powerful 42mm disc brake technical specs type: nitro 4wd monster truck scale: 1/10 length: 21.2 in (539mm) width: 16.5 in (417mm) wheelbase: 13.2 in (335mm) weight: 10 lbs (4.5kg) chassis: extended chassis 4mm 6061-t6 aluminum drivetrain: shaft-driven tire type: chrome hurricane™ motor or engine: trx® 3.3 radio: traxxas tq™ 2.4ghz high output with traxxas link™ (3-channel) wheel size: 3.8" kit/rtr: rtr fuel tank capacity: 125cc model : tra4907 by traxxas price: $260 (for moq order with 10 units)

features : factory-installed castle creations mamba monster™ brushless system speeds of 65+ mph two 7-cell 3000mah batteries included heavy-duty brushless ready transmission with steel idler gear and revo®-spec torque-control™slipper clutch tq 2.4ghz dss radio system eliminates crystals and frequency conflicts dual digital waterproof steering servos deliver 250 oz-in of torque & 0.16-sec transit time adjustable four-position wheelie bar precision rubber-sealed ball bearings blue-anodized aluminum antenna crimp nut four-position wheelie bar included fully painted, trimmed, and decaled prographix® body watertight sealed receiver box integrated dual servo bellcrank and servo saver eight fully-adjustable, coil-over ultra shocks technical specs : type: 4wd off road scale: 1/10 length: 22.91 inches (582mm) width: 16.38 inches (416mm) wheelbase: 14.1 inches (358mm) weight: 135oz (3.82kg) chassis: molded composite nylon tub suspension: advanced suspension design drivetrain: shaft-driven 4wd tire type: talon (5.75" x 3.8") motor or engine: castle creations mamba monster 2200kv speed control: castle creations mamba monster forward/reverse/brake radio: traxxas tq 2.4ghz batteries: two nicad or nimh (stick)7.2v or 8.4v (6 or 7 cell) speed: 35+mph (65+mph w/ lipo battery) gear pitch: 32-pitch wheel size: 3.8" gemini (black-chrome) with 17mm splined hex kit/rtr: rtr shock type: precision aluminum shocks body: prographix ball bearings: rubber sealed bearings needed to complete : 8"aa" batteries for transmitter model : tra5608 by traxxas price: $425 (for moq order with 10 units)