Digital Printer Store

Surabaya, Indonesia

we are providing HP Scitex FB910 GEN3 slave Print Head.This GEN3 slave printhead is suitable for HP Scitex FB910 and ColorSpan Legacy DisplayMaker UV models. This is the original HP part (number CH971-91156).

we offer JV34-260 Print Head ID Set.This print head ID set is suitable for Mimaki JV34-260 and TS34-1800A printers. This is the original Mimaki part Printer compatibility: Mimaki JV34-260 TS34-1800A

The Konica Minolta KM1024 LH print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 LH print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 LH print head has 1024 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. The print head has an integrated heater, which makes it ideal for UV inks, but suitable for solvent inks as well. This print head is also known as the Konica Minolta KM1024 LHB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. Specifications Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)Native Resolution: 360 dpiCal. Droplet Size: 42 pico litreMax. Drops in Greyscale: 8 dropsTot. Amount of Nozzles: 1024 (512 nozzles per line)Nozzle Spacing: 70.5 micronsPrint Width: 72 mmFiring Frequency: 6.7 kHzInk Compatibility: UV and Solvent InksHeater: integrated Printer compatibility: IIJ ColourPrint 72 MonoPrint 72 ColourPrint 144 MonoPrint 144 ColourPrint 282 MonoPrint 282 ColourPrint 352 MonoPrint 352

we are providing Konica KM1024 LNB 42PL.The Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 LN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 LN print head has 1024 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 LNB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.This Printhead is used for white ink on Agfa printers. Specifications Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)Native Resolution: 360 dpiCal. Droplet Size: 42 pico litreMax. Drops in Greyscale: 8 dropsTot. Amount of Nozzles: 1024 (512 nozzles per line)Nozzle Spacing: 70.5 micronsPrint Width: 72 mmFiring Frequency: 6.7 kHzInk Compatibility: Oil based and Solvent InksHeater: not integrated Printer compatibility: Agfa :Anapurna M2540 FB :Anapurna M2050 :Anapurna M1600, Allwin S16 C8 C12

The Konica Minolta KM1024 MH print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MH print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MH print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head has an integrated heater, which makes it ideal for UV inks, but suitable for solvent inks as well. This print head is also known as the Konica Minolta KM1024 MHB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. Specifications Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)Native Resolution: 360 dpiCal. Droplet Size: 14 pico litreMax. Drops in Greyscale: 8 dropsTot. Amount of Nozzles: 1024 (512 nozzles per line)Nozzle Spacing: 70.5 micronsPrint Width: 72 mmFiring Frequency: 12.8 kHzInk Compatibility: UV and Solvent InksHeater: integrated Printer compatibility: Dilli Neo Titan UV-1604DW Neo Titan UV-1604DS Neo UV-LED Flatbed, IIJ ColourPrint 72 MonoPrint 72 ColourPrint 282 ColourPrint 352 MonoPrint 352 ColourPrint 142 HQ, sun Neo UV-LED Flatbed, Tecom TIJ 2048C400, Jetrix 3015FQ, Orbotech Inkjet Legend Printers

The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MN print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 MNB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. Specifications Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)Native Resolution: 360 dpiCal. Droplet Size: 14 pico litreMax. Drops in Greyscale: 8 dropsTot. Amount of Nozzles: 1024 (512 nozzles per line)Nozzle Spacing: 70.5 micronsPrint Width: 72 mmFiring Frequency: 12.8 kHzInk Compatibility: Oil Based and Solvent InksHeater: not integrated Printer compatibility: Agfa :Anapurna M1600 :Anapurna M :Anapurna M2050 :Anapurna M2540 FB , Allwin C8

The Konica Minolta KM1024 SHB print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 SHB print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 SHB print head has 1024 nozzles with a droplet size of 6 pico litre and a native resolution of 360 dpi. The print head has an integrated heater, which makes it ideal for UV inks, but suitable for solvent inks as well. This print head is also known as the Konica Minolta KM1024 SHB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. Specifications Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)Native Resolution: 360 dpiCal. Droplet Size: 6 pico litreMax. Drops in Greyscale: 8 dropsTot. Amount of Nozzles: 1024 (512 nozzles per line)Nozzle Spacing: 70.5 micronsPrint Width: 72 mmFiring Frequency: 26 kHzInk Compatibility: UV and Solvent InksHeater: integrated Printer compatibility: Docan M2, AOJet APro 320F, Yinghe YH-3304X, IIJ Colourprint 72 Monoprint 72 Colourprint 282 Monoprint 282 Colourprint 352 Monoprint 352 Colourprint 142HQ

The Konica Minolta KM256 LN print head is an entry level, compact, shear mode, piezo on-demand print head that is usable in binary mode only. It is suitable for both wide format and industrial applications. The Konica Minolta KM256 LN print head has 256 nozzles with a droplet size of 42 pico litre and a native resolution of 180 dpi. It is compatible with oil based and solvent inks. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. Specifications Technology: On-Demand Piezo ElectricNative Resolution: 180 dpiCal. Droplet Size: 42 pico litreTot. Amount of Nozzles: 256Ink Compatibility: Oil Based and SolventHeater: not integrated Printer compatibility: Aestrik InWear S3304K2 InWear S3308K2, Megagraphic Extreme Compact Solvent XK 320

The Konica Minolta KM512 LH print head is a robust, shear mode, piezo on-demand print head that is usable in binary mode only. The Konica Minolta KM512 LH print head has 512 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. It has an integrated heater, which makes it ideal for oil based and UV inks, but it works with solvent ink as well. The heater can be heated up to 55C. This print head is also known as the Konica Minolta KM512 LHX. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. Specifications Technology: On-Demand Piezo ElectricNative Resolution: 360 dpiCal. Droplet Size: 42 pico litreTot. Amount of Nozzles: 512 (256 nozzles per line)Nozzle Spacing: 70.5 micronsPrint Width: 36.1 mmFiring Frequency: 7.6 kHzInk Compatibility: Oil Based, Solvent and UV InksHeater: integrated Printer compatibility: Dilli Neo Titan UV-1606W, Docan 2512 UV (only for white ink) 2518 UV (only for white ink) 2518-16 UV (only for white ink) 3020 UV (only for white ink), Gerber Solara Ion V Solara Ion X, Grapo Manta Slim Octopus II, Leopard UVB, Ampla Digital Targa Pro.

The Konica Minolta KM512 LN print head is a robust print head , shear mode, piezo on-demand print head that is usable in binary mode only. The Konica Minolta KM512 LN print head has 512 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. It is compatible with oil based, solvent and UV inks. This print head is also known as the Konica Minolta KM512 LNX. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. On the Agfa :Anapurna Mv and :Anapurna Mw printers, the KM512 LN 42PL is used for Varnish (Mv) or White Ink (Mw). For all other colours, PPHKM512MN is used. Specifications Technology: On-Demand Piezo ElectricNative Resolution: 360 dpiCal. Droplet Size: 42 pico litreTot. Amount of Nozzles: 512 (256 nozzles per line)Nozzle Spacing: 70.5 micronsPrint Width: 36.1 mmFiring Frequency: 7.6 kHzInk Compatibility: Oil Based, Solvent and UV InksHeater: not integrated Printer compatibility: Agfa :Anapurna Mv :Anapurna Mw Aestrik InWear S3304K5 InWear S3308K5, Allwin C8 C12 H8, Anhui Liyu Apollo PT-KL Apollo PTP1804-KL Apollo PTP1806-KL Apollo PTP1808-KL Apollo PTP3204-KL Apollo PTP3206-KL Apollo PTP3208-KL Apollo PTP183202-KC Apollo PTP183204-KC Apollo PTP183206-KC Apollo PZ3204-KX Apollo PZ3206-KX Apollo PZ3208-KX, JHF Vista 2506 3306 S5004F S5006FS H8 3308F H8 3304F H8 3306F, Myjet WB320 LB320 LE320, Rodin K4320-A K4320-B, Skynet PC-series HS-series

The Konica Minolta KM512 LNX-35 print head is a robust print head , shear mode, piezo on-demand print head that is usable in binary mode only. This Konica Minolta print head has 512 nozzles with a droplet size of 35 picolitre and a native resolution of 360 dpi. It is compatible with oil based, solvent and UV inks. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. Specifications- Technology: On-Demand Piezo Electri- Native Resolution: 360 dpi- Cal. Droplet Size: 35 pico litre- Tot. Amount of Nozzles: 512 (256 nozzles per line)- Nozzle Spacing: 70.5 microns- Print Width: 36.1 mm- Firing Frequency: 10 kHz- Ink Compatibility: Solvent- Heater: not integrated Printer compatibility: Aestrik InWear S3304K5 InWear S3308K5, Allwin C8 C12 H8, Anhui Liyu PT-KL Apollo PTP1804-KL Apollo PTP1806-KL Apollo PTP1808-KL Apollo PTP3204-KL Apollo PTP3206-KL Apollo PTP3208-KL Apollo PTP183202-KC Apollo PTP183204-KC Apollo PTP183206-KC Apollo PZ3204-KX Apollo PZ3206-KX Apollo PZ3208-KX Maxima PZ3204-KX Maxima PZ3206-KX Maxima PZ 3208-KX, JHF Vista T903316LNX T903312LNX V12 Vista3306 S5004F S5006FS, Myjet WB320 LB320 LE320, Rodin K4320-A K4320-B, Skynet PC-series HS-series