Hashing Techno

Malang, Indonesia

• MOQ 1 Piece(s)

We are offering Hash Speed: 300 - 400khs Gridseed Infinity Dualminer 300~400khs Scrypt ASIC Miner In stock! Immediate Shipping!! I provide everything you need to setup the miner straight away. It comes with software and instructions on how to use. This miner has two modes: scrypt (litecoin, etc) only and dualmining scrypt + SHA256 (, etc) mode What you get when you buy from me: 1 x Gridseed Dualminer 300-400 khs Scrypt ASIC Miner 1 x 12v 5A power supply (both 110v or 220v are available) (EUUKUS Plug) 1 x mini usb cable 1 x instructions to setup 1 x software to run miner Dimensions 9.5cm x 7cm Weight 418 grams Power input 12v DC input Cooling Large heatsink and fan ensure it runs cool Hashing Speed SHA256 () Scrypt (litecoindogecoin) Power Consumption (watts) Dual Mode 8 ghs 300 khs 60 watts Scrypt only Mode OFF 330 khs 7 watts Supported Operating Systems Windows XP, Windows 7, Windows 8, Windows 8.1, Raspberry Pi, Ubuntu, Linux

• MOQ 1 Piece(s)

We are offering ANTMINER S7-LN with power supply Specifications: 1. Hash Rate: 2.7 THs ±5% 2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp) 3. Power Efficiency: 0.25 JGH + 10%(at the wall, with Enermax, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. Chip quantity per unit: 90x BM1385 6. Dimensions: 306mm(L)*150mm(W)*275mm(H) 7. Cooling: 2x 12038 fan 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet 10. Default Frequency: 700M 11.PSU:1000W Enermax golden power supply Notes: 1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter. 2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 10A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. 3.Connections of the power supply:Connect the AC plug to the power source, turn the power switch to the "一".If the power is still off , please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !! 4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.

• MOQ 10 Piece(s)

We are offering Specifications: * Max Hash Rate: 63 GHs ±5% * Power Efficiency: 1WattGHs on wall at 0.83V * Voltage: DC 12V input, 6A * Chip Quantity per unit: 4 * One 80mm fan * Noise: ~25 DB at 25 °C ambient temperature * Hashrate and VDD core voltage can be adjusted via cgminer command line * USB connection * 12V ACDC power brick of 6A, but power line not included * Certificate Compliance: FCCCE Note: 1) Power consumption: Quoted figures depend on your PSUs efficiency, the ambient temperature and the accuracy of the power meter. 2) PSU: You must provide your own a power line. Features: Scalable: Multiple U3 miners can be maintained by one controller running cgminer due to its USB port. Hassle free: Setup consists of plugging in the USB and power cables and running Antminer CGMiner. Cool: U3s remain cool and quiet due to its 80mm fan which quietly exhausts air out the side of the case. Stable and Accurate: Based on the tried and tested BM1382 chip, the U3 is extremely stable and is able to run 24 hours a day without problems. Exquisite: The refined design of the U3 allow it to blend on any desk or shelf without standing out.

• MOQ 1 Piece(s)

We are offering Specifications 3.5THs guaranteed hashrate 2800W ±5% (at wall) power consumption 6U rack enclosure 35°C nominal intake air temperature 0.78JGH typical efficiency (at wall). Features 24 Hash card slots 11 Hash cards with 120 Bitfury chips each Optional voltage control for maximum efficiency Status display* with 5 programmable buttons 3 months guarantee extendable to 12 months Optional remote admin and troubleshooting

• MOQ 1 Piece(s)

We are offering litecoin mining.

• MOQ 1 Piece(s)
• Brand NameMinerslab
• Number Of FlowerMiner Bitcoin

We are offering Brand MinersLab Hashing Speed 20THs Hashing Algorithm SHA-256 Embedded PSU 2100 Watts Estimate power consumption 0.102 Watt per 1GHs Chip 16nm HPP (High Performance Process) Control unit Embedded, with pre-installed OS and mining software Data Interface USB 3.0, Ethernet 100 Mbps Wireless connection Wi-Fi (802.11a, 802.11bgn, 802.11ac) Warranty 5-year Created by experienced specialists in building of mining hardware, SMART Miner 3.0 is the most powerful and power efficient SHA-256 miner for today. Ultrafast 20THs miners will be supplied in a convenient 4U Rackmount case and fully ready for mining (PSU, control unit, cables and easy setup included). Plug-and-Mine. It doesn’t matter if your a pro or a newbie in mining – start mining in just 5 minutes. SMART Miner 2.0 SE has a built-in controller and is shipped with pre-installed operating system and software. It is easy to maintain and need only some minor setup. 1xDVI and 1xHDMI ports for monitor connection. 2хUSB 3.0 ports for mouse and keyboard connection. 2xLAN Ethernet for connection a network in cascade mode SMART Miner 3.0 units can be connected in cascade mode by using 100 Mbps Ethernet LAN, in this case they can be controlled by one of the miners.

• MOQ 10 Piece(s)
• Brand NameBitfury

We are offering Hash Speed: 4 - 5 GHs From the team that brought you the red and blue fury miners, comes the Twin Fury USB Miner. These usb miners have two bitfury chips so the hash rate is between 4-5 ghs and they pack a lot of punch. Comes with everything you need to start mining straight away! Simply plug and play into any USB socket and you are off! Specifications - Each miner has two Bitfury Chips - Hash rate speed of 4 ghs - Can be overclocked to 5 ghs - Power draw of

• MOQ 1 Piece(s)

We are offering Hash Speed: 5200 - 5800khs Gridseed Blade 5200~5800khs Scrypt ASIC Miner In stock! Immediate Shipping!! I provide everything you need to setup the miner straight away. It comes with software and instructions on how to use. This miner can mine any scrypt coin such as litecoin, dogecoin, worldcoin, digitalcoin, etc Specifications - There are 2 PCB Panels in each Miner - Each Panel has 40 GC3355 chips. Each panel has it’s own power socket and usb port - One 80-chip blade miner is equivalent to 16 Gridseed 5-chip USB miners - Official Scrypt hashrate is 5.2M (2.6M on each panel) - Power consumption: 140 watts What you get when you buy from me: 1 x Gridseed Blade 5200-5800 khs Scrypt ASIC Miner 1 x 12v 30A power supply (both 110v or 220v are available) 2 x mini usb cable 1 x USB Hub 1 x instructions to setup 1 x software to run miner Weight 9 kg Power input 12v 30A DC input (provided) Cooling Large fan ensure it runs cool Hashing Speed Scrypt (litecoindogecoin) Power Consumption (watts) 1 x miner 5200 - 5800 khs 140 watts Supported Operating Systems Windows XP, Windows 7, Windows 8, Windows 8.1, Raspberry Pi, Ubuntu, Linux

• MOQ 10 Piece(s)

We are offering Hash Speed: 70khs This is a ASIC scrypt miner that is made to specifically miner scrypt such as litecoin, dogecoin, worldcoin, digitalcoin, novacoin, etc. It is also the worlds first multiple coin USB miner. That means it can mine both and litecoin at the same time!! For example, it can mine any SHA 256 such as , peercoin, namecoin, zetacoin, emercoin, etc and any scrypt coin of your choosing. It has two mining modes: scrypt only and dualmining. Simply plug and play and you are ready to go. It comes with GUI software to run and instructions on how to setup. Hashing Speed SHA256 () Scrypt (litecoindogecoin) Dual Mode 500 mhs 40 khs Scrypt only Mode OFF 70 khs Colours Gold, black, or blue (there is no choice, colours are assigned randomly) Requirements 1. Currenly only the following Windows operating systems are supported: Windows XP, Windows 7, Windows 8, Windows 8.1 2. GUI Cgminer (comes with product) Size 7 cm x 2.5cm x 0.3cm Weight 41 grams (in packaging)

• MOQ 1 Piece(s)

We are offering Brand BLESSINGHASH Hashing Speed 1200MHs Scrypt Mining Algorithm Scrypt Mining Power Consumption 1000 Watts Chip Minion2 ASIC Chip Scrypt Miner Data Interface USB 3.0 , USB 2.0 and Ethernet 100 Mbps Warranty 10 Years BlessingHash LEOPARD 1200MHs – one of the most expected device on ’ market – Litecoin miner witch can be also used for other with Scrypt-based mining algorithms. To create it we used all our positive experience in building miners and most cutting-edge technologies for computations, using Scrypt algorithm. That allowed us to reach a completely new level of creating miners for Litecoins, Dogecoins, etc. Few of these miners are successfully used for mining contracts in our data center. BH LEOPARD 1200MHs Scrypt Miner allows you to be a step ahead of the others. Only quality parts and materials are used in its construction, they provide for long service life and failure-free performance. Extended warranty within 10 years covers all possible failures, although the possibility of their occurrence is extremely low. BH LEOPARD has a built-in controller and pre-installed software. Setup and installation will take just a few minutes even if you are new to mining. 1xHDMI port for monitor connection. 1xUSB 3.0 ports for high speed data transfer. 2хUSB 2.0 ports for mouse and keyboard connection. 2xLAN Ethernet for connection a network in cascade mode For serious professionals and investors it is possible to connect up to 10 units BH LEOPARD Scrypt Miners in cascade mode via 100 Mbps Ethernet LAN, they will be controlled by one of the miners.