Printpartin

Makassar, Indonesia

genuine ricoh gen4 7pl printheadthe gen4 printhead is suitable for water-based, solvent, oily, uv ink, with an integrated heater and thermistor, has two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet. it is also the most widely used nozzle in recent years. it not only has a long service life, but also has a very good color and fineness. the resolution can be close to the effect of epson nozzles. close to the original figure about 85%, suitable for the current market use of painting, relief, varnish process.
physical:
size - 63(w) x 63(d) x 16.2(h) mm (excluding cables)head materials - sst, ni & epoxy adhesive (direct contact with ink)nozzle plate surface - non-coated sstnumber of nozzles - 2x 192 channelsink inlet port - 2x dual portspiezo type - d33 stacked pztdrop ejection mode - piston pusher with metallic diaphragm plateintegrated electronics - low-voltage serial to high-voltage parallel converter with 2-bit shift resistors and transmission gate outputs.temperature control - integrated heater and thermistoroperating temperature range - up to 60 c
inks:compatible jetting fluids - water, solvent, oil, uv curableviscosity range - 10-12 cp (at operating temp.)surface tension - 28-35 dynes/cm
performance:native drop volume - 7 pico-literdrop volume range / variation - 5-25 pico-liter with grey-scale / 10%drop velocity nominal / variation - 8 m/sec / 10%crosstalk - 10% or less with all channels firingjet straightness 1 sigma - < 3.5 milli-radian from nozzle centerlineoperating jetting frequency - native drop; up to 30khz / grey-scale; up to 20khzlife - 100 billion actuations per nozzle

genuine print head efi vutek jetpack hs100this asm, jetpack print head grey scale platinum is suitable for vutek gs-series printers. this printhead includes the heating element and the smoothing electronic board. the jetpack also includes a set of two jet clamps (part number 45083572 / 45093679 / 45095093) and screws to install and aligne the printheads on the vutek printer. this is the original vutek part (number replacing numbers 45083572 / 45093679 / 45095093 / 45093679). this is the latest upgraded head that comes with the connector.printer compatibility: vutek gs2000 / gs2000 pro / gs2000lx / gs2000lx pro / gs3200 / gs3200 pro / gs3250 / gs3250 pro / gs3250lx / gs3250lx pro / gs3250r / gs5000r / qs2 pro / qs3 prodp part number : pphvu12817specifications:- drop size: 12pl- grey scale levels: 7- nozzles: 508 nozzles- firing frequency: 18 khz- active print width: 72 mm- damper: integrated, quick dry break connector

spectra nova ja 256/80 aaa printheadthe dimatix (spectra) nova ja 256/80 aaa print head is a high performance, robust and reliable jetting assembly designed for a broad range of industrial and commercial printing applications such as wide format graphics, textiles, addressing and packaging at resolutions up to 450 dpi.

description:
the dimatix (spectra) nova ja 256/80 aaa is a high performance, robust and reliable jetting assembly designed for a broad range of industrial and commercial printing applications such as wide format graphics, textiles, addressing and packaging at resolutions up to 450 dpi.
thedimatix (spectra) nova ja 256/80 aaa is a compact ink jet jetting assembly designed specifically for applications using a variety of jetting fluids and requiring multiple printheads packed tightly together.
four electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 256 jets. the nozzles are arranged in a single line, at a 0.011 inch distance between nozzles.
the fluid interface and electrical connection are at the top of the jetting assembly. several mounting configurations are possible. this arrangement permits extremely tight packing in the print process direction. the dual ported fluid interface facilitates flushing for quick change-overs and for displacing drying fluids with inert fluids during periods of non-use.
this jetting assembly contains serial-to-parallel converters for selecting which jets to fire; all jets can be fired simultaneously or individually. by using an optional head interface board, image data can be daisy-chained into one serial stream to reduce the data interface hardware requirements. a high voltage fire pulse with controlled slew rates is used to actuate the pumping chambers within each channel.
optional temperature control components are available for precise control of fluid viscosity. optional deaeration hardware is also available.
to be used: hjii3200/5000se, yishan ps-3204s, yishan polajet ps-3204dx, yishan ys5008-ee, vutek ultravu3360, teckwin teckpro s3200.

the total length of this printhead is 248mm including cables. (manual measurement, there may be 1cm error of physical)
this gen5 uv printhead is suitable for a range of uv and solvent printers. it supports up to four colours and has a total of 1.280 nozzles. it is built with longevity and robustness in mind and used in the latest industrial inkjet printers. this is ricoh original printhead part (number mh5420) and it is covered by a manufacturer warranty. this ricoh gen5 is available in two different cable lengths (connector included): 140mm or 390mm.
product specifications
dimensions: 89 x 25 x 69 mm (excluding cables)
head materials: sst, nickel alloy and epoxy adhesive
nozzle plate surface: coated sst
number of nozzles: 4 x 320 nozzles
nozzle spacing: 0.1693 mm
nozzle density: up to 600 npi
piezo type: d33 stacked pzt
a-starjet : 5.0, 5.0 l
agfa : jeti mira mg2716 s/hs, jeti mira mg2732 s/hs, jeti tauro h2500, jeti titan hs, jeti titan s
akad : novajet uv m6
amicasystems : fg2512
aojet : apro 250f
cet color : q5-1000, q5-1000h, q5-250, q5-250h, q5-500, q5-500h
docan : 1212 uv. fr3210. frt3116. m10. m6. m8
flora : lj180g, lj320g, pp 3220uv, pp1612uv-g, pp2512uv-g
handtop : ht1600uv hr4, ht1610uv fr4, ht2500uv hr8, ht2512uv-d fr8, ht3116uv fr8, ht3200uv hg12, ht3200uv hr8
indask : f1212 uv, f2030 uv, f2518 uv, fr2510 uv, frt3215 uv, frt3225
jhf vista : r3300
lavaprint : 4896-hrc, 78118-hrc
m&r : m-link x
mantis : mts-uv1513ri
mehta : power 4s, power pro 3200
metha : rasterjet rj2030, rasterjet rj2512, rasterjet rj2512h
mtutech : mt-rh1510r
rose maxcan : rgp-mc48-g5, rgp-mc45-g5
sprinter : turecolor tc-fg2030, turecolor tc-f2030, turecolor tc-fr2512, turecolor tc-f2512, turecolor tc-f1212
titanjet : 3302-g5n
twinjet : mc - f2030g, mc - f2513g
vivex : cs 3300
temperature control: integrated heater and thermistor
operator temperature range: up to 80 c
native drop volume: 7 pl
drop volume range: 7 - 35 pl
drop velocity: 7 m/s
jetting frequency: up to 60 khz
ink compatibility: uv inks
life: 100 billion actuations per nozzle
genuine new ricoh gen5 / 7pl-35pl printhead
ricoh gen5 / 7pl-35pl printhead (two color, short cable)
printer compatibility: handtop, docan flatbed uv printers
manufacturer: original

genuine printhead seiko spt255/35pl
the seiko spt255/35pl printhead offers high-resolution (720dpi) and high-speed.
this original print head is used on grand format digital printers such as infiniti fy 323b.

specification:
model:spt 255
spt255-35pl printhead
fast firing frequency, high precision, long useable life
high quality with competitive priceproduct:spt255/35pl printhead
number of nozzles: 254
native resolution: 180dpi
max. resolution: 720dpi
printhead width: 35.7mm
drop size: 34pl
firing frequency: 8.01khz
type of ink: solvent
place of origin: japan
the sii printek spt series is designed for integration into a variety of printing applications.

genuine printhead seiko spt510/50pl
fully equipped with 510 active nozzles for high-resolution (720dpi) and high-speed (50 pl) printing and steel-plate protection for a longer life, this durable printhead lasts 4-5 times longer than many common128 printheads.

specifications:
- technology: drop on demand piezo electric
- active nozzles: 510
- native resolution: 180 dpi
- max resolution: 720 dpi
- drop volume: 50 pl
- firing frequency: 6-8 khz
to be used with: crstaljet f1804spt510_50pl, crstaljet f3304iispt510_50pl,
crstaljet f4304spt510_50pl, crstaljet f4308spt510_50pl, crstaljet
s4306spt510_50pl, crstaljet s6306iispt510_50pl, crstaljet f6308iispt510_50pl
remarks: original

original mimaki printhead 5540. this is the original mimaki part number m015372
manufacturer: epson
printer compatibility: mimaki jv150 / jv300 / cjv150 / cjv300
this printhead 5540 is suitable for mimaki cjv300 & jv300 series printers. this is the original mimaki part (number m015372 replacing number m015307). the calbe of this printhead is 354mm long and 30 mm wide.
printer compatibility: mimaki cjv300-130 / cjv300-130bs / cjv300-160 / cjv300-160bs / jv300-130 / jv300-130a / jv300-130bs / jv300-160 / jv300-160a / jv300-160bs / cjv150-130 / cjv150-160 / cjv150-75 / cjv150-130bs / cjv150-160bs / cjv150-75bs / jv150-130 / jv150-160 / jv150-130bs / jv150-160bs

mutoh valuejet vj-1638 / vj-1638w / vj-2638 printhead - dg-43345
to be used with: mutoh valuejet 1638 / valuejet 1638w / valuejet 2638 / valuejet 1638wx / valuejet 1638x / valuejet 1938wx
remarks: original
part no.: dg-43345


specifications:
model:prh-mim-005
technology:micro-piezo
native resolution:360 dpi
min. droplet size:1.5 pico litre
tot. amount of nozzles:1440 (8 lines x 180 nozzles)
firing frequency:8 khz
ink compatibility:eco-solvent and mild solvent
damper type:requires dx6 valve dampers

genuine printhead xaar 1001 gs12/gs6the xaar 1001, available in two drop size variants, is a unique piezoelectric drop-on- demand printhead that delivers unrivalled reliability for single-pass printing applications such as labels, packaging, ceramics, advanced manufacturing and other product decoration.
the xaar 1001 printhead combines xaars tf technology and hybrid
the xaar 1001 also delivers outstanding print quality as its high native resolution together with its greyscale capability provide an effective resolution of over 1000 dpi so that images are amazingly life-like and text is pin sharp.
in addition, this capability eliminates the need for additional colours, for example light magenta and light cyan, which reduces the cost per copy and contributes to the printheads low cost of ownership.
fast time to market is ensured because the xaar 1001 is easy to integrate, and both the xusb drive electronics and hydra recirculating ink system are easily configured and optimised with the printhead.
the xaar 1001 is the flagship printhead from xaar, a world leader in the development and manufacture of piezoelectric drop-on-demand inkjet technologies.
the company, which was established in 1990, is headquartered in the uk, and also has offices in sweden, usa, brazil, china and india. today, xaars state-of-the-art printhead manufacturing lines in europe are among the most innovative in the world.

quick details :
brand name:xaar
model number:xaar 1001
type:printhead
use:solvent printer
printing type:inkjet printer

km1024lnbthe konica minolta km1024 ln print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
the konica minolta km1024 ln print head is a vast improvement over the km512 print head series, offering twice the print width and double the level of greyscale. konica minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the km1024 reduces power consumption even further.
the konica minolta km1024 ln print head has 1024 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. the print head is compatible with oil based and solvent inks.
this print head is also known as the konica minolta km1024 lnb. this is konica original print head and it includes the head id and the necessary waveform information. it carries a product warranty.this printhead is used for white ink on agfa printers.

specifications:
technology: on-demand piezo electric (shared wall 3 cycle)
native resolution: 360 dpi
cal. droplet size: 42 pico litre
max. drops in greyscale: 8 drops
tot. amount of nozzles: 1024 (512 nozzles per line)
nozzle spacing: 70.5 microns
print width: 72 mm
firing frequency: 6.7 khz
ink compatibility: oil based and solvent inks
heater: not integrated

Genuine Printhead StarFire SG1024/SCThe StarFire SG1024/SC is a compact, self-contained unit built to withstand the harsh environment of industrial ceramics production. It uses field proven materials to deliver consistent output over a long service life with continuous ink recirculation and two-color operation at 400 dots-per-inch. Equipped with a single replaceable metal nozzle plate that is designed to withstand abrasion and resist damage. The unit is compatible oil-based ceramic inks.

genuine printhead seiko colorpainter 64s/100s
this is the konica minolta km512 mn print head, it is a robust, shear mode, piezo on-demand print head that is usable in both binary and 4 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
the konica minolta km512 mn print head has 512 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. it is compatible with oil based, solvent and uv inks. this print head is also known as the konica minolta km512 mnx. this is konica original print head and it includes the head id and the necessary waveform information.

specifications:
compatible manufacturers: seiko
nozzle number: 512
remark: original
sizes: 110*100*60(mm3)
suitable for printers:seiko colorpainter 100s, seiko colorpainter 64s
volume weight: 0.15
weight: 0.3lb (0.15kg)
the km512 mn 14pl is not suitable for the varnish or white ink on the agfa :anapurna mv and :anapurna mw printers. please order km512ln (prh-kon-005) if you need print heads for varnish (mv) of white ink (mw).

genuine printhead xaar 128/40w - light grey
compact footprint, light and powerful, light carriage and weighing only
15.5g, it is ideal for applications where weight is a key design requirement

up to 8.3 khz firing frequency
available in two drop-size variants (40 pl and 80 pl)
robust and cost effective solution
360 dpi (native) printhead resolution.
easy to integrate
adaptable across multiple digital print markets
compatible with an extensive range of oil-based, solvent-based and uv inks
simple electronic interface promoting quick and easy integration
wide operating latitude for lower cost inks.
wit-color 720t / wit-color 860+, allsign hx3204s / hx3208s / hx3212s /
hx3216s, teckwin teckstar 18 / teckstar 25, dgi xp-3204t

spectra polaris pq 512/15 aaa printheadspectra polaris printhead pq-512/15 aaa has 512 independent channels arranged in multiple rows at 200 dots-per-inch spacing for single color operation, or 100 dots-per-inch spacing for two color operation.
the polaris pq-512 / 15 aaa printhead has 512 independent channels arranged in multiple rows at 200 dots-per-inch spacing for single color operation, or 100 dots-per-inch spacing for two color operation.
spectra polaris printhead is designed for binary jetting using a 15-picoliter native drop size with 8-meters per second nominal drop velocity for jetting fluids in the 8 to 20 centipoise range. using versadrop jetting technology, the printhead is capable of adjustable binary operation at drop sizes up to 30 picoliters with resolutions up to 1000 dpi.
building upon the legendary reliability and performance of the spectra nova and galaxy printheads, the polaris pq-512 aaa family of printheads uses field proven materials and a repairable design to deliver a long service life and consistent output. and by leveraging the inherent flexibility of the q-class platform, the
polaris pq-512 aaa offers even greater jetting performance, nozzle packing density, and configuration flexibility.
the pq-512 / 15 aaa printhead is compatible with a broad range of inks, including uv-curable, aggressive organic solvent and aqueous inks and associated maintenance fluids.
warm tips: the printhead should be installed by technical person

specifications
- technology: piezo electric
- max. resolution: 1000 dpi
- cal. droplet size: 15 pico litre
- adj. range for droplet size: 15-30 pico litre
- tot. amount of nozzles: 512
- nozzle spacing: 127 microns (1 colour) or 254 microns (2 colours)
- firing frequency: 40 khz (20 khz for 30 pico litre droplets)
- operating temperature: up to 60c
- ink compatibility: solvent water-based and uv inks

genuine roland dx4 eco solvent print head-1000002201roland soljet proii sj-540, sj-645ex, sj-655ex, sj-740, sj-745ex, sj-1045ex, sj-1000, sc-540, sc-545ex,
roland versacamm sp-300v, sp-540v, vp-300, vp-300i, vp-540i,
roland soljet pro iii xj-640, xj-740, xc-540, xc-540w, xc-545mt,
roland versacamm print & cut vs-540/540i,
roland versaart rs-640,
mimaki jv3(jv3-130, jv3-130sp, jv3-160, jv3-160sp, jv3-250, jv3-250sp etc.)
mutoh rh-ii(falcon2), rh-3, mutoh rj-8000, spitfire 65, spitfire 90,
blizzard 65, blizzard 90, my-44743.