Our Products
Model JK 805D 2 Needle 5 Thread Overlock Machine with Direct Drive and Power Saving Motor
Direct Drive 5 Thread High Speed Overlock.
Integrated power saving motor
Adjustable speed.Ease of use, Ease of threading built into this modern designed overlock.
The 5 thread overlock has become the machine of choice for Joining none-stretch fabric seams. This stitch class is known for its strength.
Oil Supply System Optimisation.Fully enclosed needle bar mechanism & oil return mechanism, improve the condition of needle bar abrasion & oil leaking.
Push-button.Stitch Length control.
Differential feed control allowing flat pucker free seams on difficult fabrics.
Built in Led Light.No more struggling with problematic machines. The Jack JK-805D is a
pleasure to use. Silent motor & reliable machine.
Needle
B27 size 11/16 Number of needles 2
Direct Drive Motor.70% saving on standard clutch motor.
Stitch length.4mm
Stitch Width.5mm (Nice and wide)
Presser Foot Height.5mm
Sewing Speed.Adjustable up to 5500 S.P.M
Differential Feed Ratio.0.7 2
Fully LubricatedHigh Speed Overlock. Complete on Formica table top and unit stand.
Model JK 9100B 1 Needle Direct Drive Lock Stitch Sewing Machine With Power Saving Motor
Power saving motor saves 71%Power Saving Motor saves 71% Power Compared with Clutch Motor.
Operation Panel is Easy to Operate, High Speed Adjustment and Accounting.
Stitches can be added freely by Adding Stitch Button.
Once Put Down, the Machine will Stop Working Immediately. (Error NO. 7) Ensure the Safety of Operator.
Easy to observe and ease the tiredness of eyesight.
Tech specs
JK-9100BS |
JK-9100BSH |
JK-9100BS-7 |
Needle | Thread Number | Stitch Length(mm) | Height of Presser Foot(mm) | Sewing Speed(S.p.m) | Thin Material | Medium-heavy Material | Heavy Material | Volume(mm) | Weight(kg) |
---|---|---|---|---|---|---|---|---|---|
DBx1 11-18# | 2 | 5 | 5-13 | 5000 | √ | √ | 635*245*550 | 33.5/40.2 | |
DPx5 18-21# | 2 | 5 | 5-13 | 3500 | √ | 635*245*550 | 33.5/40.2 | ||
DBx1 11-18# | 2 | 7 | 5-13 | 3500 | √ | 635*245*550 | 33.5/40.2 |
Feature of Straight Knife Cutting Machine:
Structure of Straight Knife Cutting Machine:The Straight knife cutting machine consists of a base plate, an up right stand to hold the vertical blade, motor, a handle for moving assembly, a sharpening device and a handle to transfer the whole assembly from one place to another.
Two kinds of power are required to operate a straight knife. Motor power drives the reciprocating blade and operator power drives the knife through the lay. Normally the available blade heights very from 10 cm to 33 cm and normally available strokes vary from 2.5 to 4.5 cm. The greater the blade movement the faster the blade cuts the fabric and more easily the operator can move the machine.