Vadodara, Gujarat, India
Our Products
Paraffin Dispersant (IPD-3320)
| Product Use | A continuous feed of IPD-3320 to prevent deposition of paraffin and other solids in tubing, flowlines, treaters, and stock tanks should be injected at a point which insures efficient mixing of the chemical in the produced fluids. |
|---|---|
| Description | IPD-3320 is a unique blend of organic surface-active compounds combined with multiple aromatic solvents that are designed to eliminate depositions of paraffin. IPD-3320 is particularly effective in removing accumulated paraffin deposits across the vast spectrum of waxes and since it is also a dispersant, it serves to retain the paraffin in the oil phase. The solvents in IPD-3320 facilitate the dispersion of the paraffinic crystals. IPD-3320 is typically utilized in any surface equipment where accumulations of paraffin occur as well as in flow lines and down hole. It can also be used for tank bottom cleanup, back washing filters, and to promote cleanup during well work over operations. |
| Application : Enhanced Oil Recovery | IPD-3320 is generally applied batch-wise by pumping IPD-3320 as the leader followed by a flush of oil or water down the annulus, or in the case of gas lift wells, pumping down the tubing. 15 gallons of IPD-3320 per foot of perforation is the recommended ratio for the treatment. |
| Handling | It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be avoided with copious amount of water. On Ingestion/Eye contact with the product, medical attention should be sought immediately. |
Physical Data
| Appearance | Brown Liquid |
|---|---|
| Flash Point | 700F |
| Density LBS/GAL | 7.7 |
| Pour Point | < -500F |
Polyelectrolyte/ Deoiler (DE - 161)
| Product Use | DE 161 is a liquid organic cationic polymer used to remove oil and suspended solids from water. It can be used alone or together with coagulants and flocculants such as iron salts, etc. |
|---|---|
| Description | DE 161 is a cationic polyacrylamide based compound. |
| Application | DE 161 is suitable for use in air flotation separation, gravity settling and direct filtration. When used in conjunction with standard flocculants, it produces an excellent flock in treatment range 5 â?? 20 PPM. Proper dosage rates have to be determined for each water. DE 161 may be pre-diluted with water or injected as supplied. |
| Handling | DE 161 can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Use of safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On ingestion / eye contact with the product, medical attention should be sought immediately. |
Physical Data
| Appearance | Viscous clear liquid |
|---|---|
| Specific Gravity | 0.98 ± 0.05 at 250C |
| Color | Pale yellow |
| Viscosity | < 100 CPS at 250C |
| pH Range | 5.5 - 7.5 |
| Boiling Point | > 100 0 C |
| Flash Point | > 100 0 C |
| Freezing Point | < -10 0 C |
| Solubility | Soluble in water in all proportions and insoluble in Aromatic Hydrocarbon Solvents. |
| Availability : 50 / 100 / 200 Kg. Net in New HDPE Carboys / Barrels. | |
Proppant Sand (IPS-2040)
| Sieve Size | 20/40 | |
|---|---|---|
| Bulk Density | (g/cm3) | 1.65-1.80 |
| Apparent Density | (g/cm3) | 3.00-3.30 |
| Crush Resistance | 52Mpa / 7500 PSI 69Mpa / 10000 PSI | 5 9 |
| Roundness | (1max) | 0.9 |
| Sphericity | ((1max) | 0.9 |
| Tubidity | (NTU) | <100 |
| Acid Solubility (12%HCL +3%HF) | (%) | <7 |
| Packing | 50 Kgs, 1000 Kgs, 1500 Kgs | 50 Kgs, 1000 Kgs, 1500 Kgs |
