Chennai, Tamil Nadu, India
Our Products
| Models |
| LHD30 , LHD60 , LHD100LHD150, LHD200, LHD300, LHD450LDL600, LDL1200, LDL2000LDL3000 , LDL4000 |
| Hopper capacity in ltr - 30 to 4000Options availableLHD Series - Machine mounted / Floor mountedLDL Series - Only Floor mountedHD Series - Casted bins on requestEnergy efficientCompact and light weightFully insulated aluminium bin with SS claddingPID control of temperatureLarge cleaning window for quick materialchange overOptions availablePneumatic Suction box for line purging |
| LHD 30 | LHD 60 | LHD 100 | LHD 150 | LHD 200 | |
| Hot Air Capacity m3/hr | 25 | 50 | 70 | 100 | 120 |
| Bin capacity lts. | 30 | 60 | 100 | 150 | 200 |
| Connected load (kW) | 1.30 | 2.00 | 2.75 | 4.50 | 5.00 |
| Power supply | 230 V, Single Phase 50 Hz | 415V, 3 Phase 50Hz | |||
| Temp Range oC | 120 | 60 - 140 | |||
| Weight approx kg | 39 | 50 | 75 | 90 | 105 |
| (HxW1xW2) in mm Height Width W1 Width W2 |
893 540 430 |
1036 617 615 |
1190 684 580 |
1364 661 741 |
1635 661 741 |
| Floor Mounted Version | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Models | ||||
| HLE, HLB-E, HLB-E , HBE 3/4 , HLS, SSL06 | ||||
| ||||
| PLC controlledAutomatic cleaning of filter after every cycleLarge discharge openingAlarm when material is not being conveyedSystem loader HLS 02-HLS 75 liters
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Models |
| LSG-1, LSG-5 |
| Scissor Cutting Action.Robust Construction.Safety Switch For Additional Safety.By using near an Injection Moulding Machine along with Hopper Loader and Proportioning Valve, the sprues can be Recycled in Closed Loop. |
| Model | LSG1 | LSG5 |
| Throat (mm) | 200 x 150 | 420 x 200 |
| Rotor ø (mm) | 150 | 180 |
| Speed of rotor (rpm) | 280 | 330 |
| No. of rotating blades | 3 | 3 |
| Rotating blade length (mm) | 195 | 415 |
| Fixed blade length (mm) | 199 | 419 |
| Throughput (kg/h) | 20-30 | 50-80 |
| Standard Sieve hole dia (mm) | 7 | 7 |
| Power (kW) | 1.5 | 5.5 |
| Power supply | 3 phase, 415 Volts, 50Hz | 3 phase, 415 Volts, 50Hz |
| Weight (kg) approx | 150 | 350 |
| Model | LSG1 | LSG5 |
| A | 200 x 150 | 250 x 400 |
| B | 1007 | 1050 |
| C | 550 x 500 | 800 x 720 |
| D | 710 | 715 |
| E | 1160 | 1300 |
| Models |
| LT150i, LT150, LT200 |
| MOULD TEMPERATURE CONTROL UNIT, 90 deg c with water, 150 deg c with oil.Heat Transfer Unit Water/Oil.Insulated Sealed Tank.PID Based Temperature Control.Leak Stop Feature. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pressurised Systems | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Models | ||||
| LMD50, LMD80, LMD120, LMD160, LMD200, LMD250, LMD 400, LMD600, LMD800 | ||||
| ||||
| ||||
| Continuous supply of dry air to the drying binClosed loop regeneration processPLC Control facility to monitor all drying functionsLarge cleaning windows from 100 liter binsIntegrated conveying versions | ||||
| Options for LMD 50, LMD 80 and LMD 120, LMD 160, LMD 250, LMD 400, LMD 600, LMD 800 | ||||
| Pneumatic Operated Suction box for purging operation during conveyingDry air conveyingWater based after cooler for HT version 20 - 40 lpm (Tap / Chilled Water, 2 bar pressure )Dew point based change over with display |
| Data | LMD 50 | LMD 80 | LMD 120 | LMD 160 | LMD 200 | LMD 250 | LMD 400 | LMD 600 | LMD 800 | |||||||||||||||||||||||||||
| Dry air capacity (m3/h) | 50 | 80 | 120 | 160 | 200 | 250 | 400 | 600 | 800 | |||||||||||||||||||||||||||
| Comprersed air pressure (bar) Oil & Moisture free |
Not Required | 5-7 | 5-7 | 5-7 | 5-7 | 5-7 | ||||||||||||||||||||||||||||||
| Air Consumption (l/h) | - | 2.3 | 2.3 | 3.5 | 3.5 | 3.5 | ||||||||||||||||||||||||||||||
| Power Supply | 3 Phase, 415V + N + PE, 50 Hz | 3 Phase, 415V + N + PE, 50 Hz | ||||||||||||||||||||||||||||||||||
| Connected load dryer (kW) (excluding drying bin, loaders) |
1.9 | 2.4 | 5.0 | 6.5 | 5.7 | 6.5 | 11.5 | 27.5 | 28.5 | |||||||||||||||||||||||||||
| Volume of drying bins (litres) |
30 | 60 | 100 | 150 | 60 | 100 | 150 | 250 | 100 | 150 | 250 | 350 | 150 | 250 | 400 | 600 | 100 | 150 | 250 | 600 | 100 | 250 | 450 | 600 | 450 | 600 | 900 | 1200 | 450 | 600 | 900 | 1200 | 600 | 1200 | 1800 | 2400 |
| Standard Combinations (no. of respective bins) |
3 | 2 | 1 | 1 | 3 | 2 | 2 | 1 | 3 | 2 | 1 | 1 | 3 | 2 | 1 | 1 | 5 | 4 | 2 | 1 | 6 | 3 | 2 | 1 | 3 | 2 | 1 | 1 | 4 | 4 | 2 | 2 | 5 | 3 | 1 | 1 |
| Drying temperature oc maximum Standard bin HT-High temperature bin (Dryer equipped with after cooler) |
140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | ||||||||||||||||||||||||||||
| - | - | - | 180 | - | 180 | - | 180 | - | 180 | - | 180 | - | 180 | - | 180 | |||||||||||||||||||||
| Heater (kW) Standard bin HT-High temperature bin (Dryer equipped with after cooler) |
1.5 | 1.5 | 2.5 | 2.5 | 1.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 4.5 | 2.5 | 2.5 | 4.5 | 4.5 | 3.0 | 3.0 | 3.0 | 6.0 | 3.0 | 3.0 | 4.5 | 6.0 | 4.5 | 6.5 | 8.0 | 12.0 | 4.5 | 6.0 | 8.0 | 12.0 | 6.0 | 12.0 | 12.0 | 18.0 |
| - | - | - | 4.5 | 4.5 | - | 4.5 | 6.0 | 6.0 | - | 4.5 | 6.0 | - | 4.5 | 6.5 | 8.0 | - | - | 12.0 | 12.0 | - | 8.0 | 12.0 | 12.0 | - | 12.0 | 18.0 | 24.0 | |||||||||
| Dimension (mm) Length L1 Height H1 Depth |
2170 | 1630 | 1085 | 1085 | 2170 | 1665 | 1665 | 1255 | 2390 | 1775 | 1440 | 1500 | 2400 | 2200 | 1425 | 1490 | 3700 | 3100 | 2400 | 2000 | 4300 | 3100 | 2780 | 2000 | 3800 | 2900 | 2900 | 1220 | 5100 | 9300 | 3520 | 4150 | 11300 | 5520 | 2850 | 2820 |
| 1300 | 1500 | 1705 | 2040 | 1500 | 1705 | 2040 | 1705 | 2040 | 2040 | 2040 | 2040 | 2040 | 2040 | 2450 | 2450 | 1710 | 2040 | 2040 | 2450 | 1710 | 2040 | 2260 | 2450 | 2260 | 2450 | 3030 | 3500 | 2260 | 2450 | 3030 | 3500 | 2450 | 3500 | 3800 | 4400 | |
| 600 | 600 | 840 | 840 | 600 | 840 | 840 | 840 | 1080 | 1080 | 1080 | 1080 | 1080 | 1080 | 1080 | 1080 | 850 | 850 | 880 | 1050 | 850 | 880 | 1060 | 1050 | 1100 | 1100 | 1220 | 1220 | 1060 | 1050 | 1220 | 1220 | 1050 | 1220 | 1550 | 1550 | |
| Weight of drying bin each with frame (kg) approx |
50 | 68 | 70 | 80 | 68 | 75 | 110 | 117 | 70 | 80 | 117 | 120 | 80 | 117 | 120 | 135 | 350 | 320 | 240 | 135 | 420 | 360 | 260 | 135 | 360 | 270 | 220 | 160 | 520 | 600 | 440 | 320 | 650 | 360 | 220 | 320 |
| Weight of dry air generator (kg) approx |
95 | 105 | 140 | 160 | 278 | |||||||||||||||||||||||||||||||
| Benefits of Central Systems: |
| Increased machine uptimeLower scrap/higher yieldImproved quality, reduced rejectionsReduced spillage and wastageImproved or gained floor spaceImproved safetyReduced labour and maintenanceReduced energy costsNeat and clean shop floorBetter aestheticsUser friendly & Modular |
| Drying System : |
| Reduce drying costsand improve dryingperformanceDrying systems are energyefficient.Modular & flexible |
| VOLUMETRIC BLENDER |
| Consistent dosing brush less motorPLC supported controlSaving on additivesInclined Screw Setting for accurate dosingOptional: Loader mounting provision |
| GRAVIMETRIC BLENDER |
| Precise Dosing of pelletsPLC with touch panelSaving on additivesUp to 100 Receipe storageDedicated PLC Module for Load CellInventory ManagementSelection of Volumetric / Gravi ModeIntelligent self optimising control |
| SPECIFICATION | UNIT | LTMG-150 | LTMG-300 |
| Max blending rate Max no of Blending materials Dosing percentage(Main component) Dosing percentage(Additive) Capacity of storage bin Load cell capacity Power supply 1PH+N+E Mixer Motor power Mixer Motor Speed Compressed air supply Compressed air Consumption Total connected load Weight(Aprox) |
(kg/h) nos % % lts kg Volts/Hz kw rpm bar m³/h kw kg |
150 4 5-100 0.8-10 15 0-3 230/50 0.12 50 5 to 7 0.3 1 60 |
300 4 5-100 0.8-10 50 0-3 230/50 1.2 30 5 to7 0.32 1.5 100 |
Off the Self Controller controls the conveying operation with a normal display or with a touch panel. Option of Bin Selection, Pre Drying Hours Confirmation, Throughput monitoring and other user required pages can be programmed to suit the needs of the operation.
The Central Blower Station Coupled with Central dust filter does the function of vacuum conveying . The fine dust from the raw material is collected at the dust filter. After the preset conveying time the by pass valve at the dust filter opens removing the load on the Blower.
Precise metering of the dried material into the vacuum stream is done by the pneumatic operated suction box. The purging feature ensures no material is trapped in the pipe lines and hoses after every conveying cycle. Optional : Dry Air Conveying.
