Call Us : +91-11-45822333

Amplitude Modulation & Demodulation Kit Manufacturers and Suppliers

YOU ARE IN : Home / Business Directory / Electronic Testing Equipment / Amplitude Modulation & Demodulation Kit

View 34 Products below

  • Tdm Pulse Amplitude Modulation And Demodulation Kit

    Features: Provides Sine waveform output of 250Hz, 500Hz, 1 KHz, and 2 KHz. With Amplitude adjustments of 0 - 5Vp-p. On board 0 to 5V DC source with Amplitude adjustments. Sampling rate of 32 KHz/channel with 8KHz. Channel Identification Signal. On-board features Four Analog Channels TDM Multiplexing/De-multiplexing Clock regeneration at receiver using PLL. 4th order Butterworth Low pass filter with cut off frequency

  • Ppm Demodulation Trainer

    PPM Modulation and Demodulation Trainer Nvis 6577 is a very prominent training product designed for students to elucidate them the concept of Modulation and Demodulation. PPM is a method of encoding information in a signal by varying the position of pulses. The unmodulated signal consists of a continuous train of pulses of constant frequency, duration and amplitude. During modulation the pulse positions are changed t

    Nvis Technologies Pvt. Ltd.

    Indore | More...

  • Amplitude Modulation And Demodulation Kit

    Deals in Fiber Optics Trainer Kits, Pulse Amplitude Modulation & Demodulation, Dual DAC & Relay & Buzzer Interface, Frequency Modulation & Demodulation Kit, DAC & Relay & Buzzer Interface IC, Time Division Multiplexing, Phase Shift Keying Transformer, Amplitude Modulation and Demodulation Kit

    I2c Logic

    Bangalore | More...

  • Pulse Amplitude Modulation & Demodulation Kit

    Deals in Panel For MG set DC To Ac, Pulse Amplitude Modulation & Demodulation Kit, Digital Flux Meter, valve refacer, MPFI Engine, RF Oscillator, Four Stroke Engine, Panel For MG set AC To Dc, vibrator nozzle, Computer Peripherals, Mp3 Players, Digital Colour Pattern Generator, lcd screen desktop computers, two stroke engine, Universal Motor, steering assembly, Panel Electrical Machine Trainer, Desktop Computers, Dig

  • Post your Buy Requirement

  • Tdm Pulse Amplitude Demodulation Transmitter Trainer (vpl-ct-tdm)

    • Multiplexing : Time Division Multiplexing.
    • Modulation : Pulse Amplitude Modulation.
    • Clock Resistance at Receiver : Using PLL.
    • Sampling Rate : 16 KHz / Channel.
    • Low Pass Filter cut – off Freq. : 3.4 KHz.
    • Accessories : Set of Patch Cords, User’s manual.
    • Power : 220V AC ±10%, 50/60Hz mains operated.
    • Sampling Pulse : With Duty Cycle variable from 0 – 90% in decade steps.
    • Interconnections : 2/4 mm socket.
    • Crystal Frequency : 6.4/8 MHz.
    • Fault Switches : 4 nos. through 4 way DIP switch for troubleshooting at different blocks.
    • Analog Input channel : 4.
    • Test Points : More than 50.
    • On – Board Analog Signal :250 Hz, 500 Hz, 1 KHz, 2KHz 500 Hz, 1 KHz, 2KHz, 4KHz (optional). :  
    • Cabinet : Enclosed in ABS plastic cabinet with detachable cover.

    SALIENT FEATURES Crystal controlled Clock. On – Board Sine Generator (Synchronized). On – Board Pulse Generator. 4 Analog input Channels samples and Time Division Multiplexed. Pulse Duty cycle selected. 4 Channel De multiplexer. Generation of clock at Receiver by PLL system. 4th order Butterworth L.P. Filters.   LIST OF EXPERIMENTS  Pulse Amplitude Modulation technique.  Time Division Multiplexing and De multi More...

    Vpl Infotech & Consultants

    Delhi | More...

  • Pam Pwm Ppm Modulation & Demodulation Trainer Kit

    • Group Name : Electronics Engineering Lab Equipments

    PAM PWM PPM Modulation & Demodulation Trainer Kit is yet another product of high performance, offered by us from Howrah, West Bengal, India. We use high-grade casting material to fabricate this kit to help in the study of pulse amplitude modulation and demodulation. It has many interesting features like built-in IC based circuit, patch cords, different test points. Due to the high quality of our kit, we have been More...

    Technolab Of Engineers

    Howrah | More...

  • Delta Modulation Trainer Kits

    7,250/Piece(s)

    Delta modulation and demodulation object: to study delta modulation and demodulation. Features: the board consists of the following built-in parts : 5v d.c. At 100ma ic regulated power supply internally connected ñ12v d.c. At 100ma ic regulated power supply internally connected quad op-amp ic two updown counter ic digital to analog convertor dac ic quad two input nand gate ic timer ic cooperator ic potentiomete

  • Amplitude Demodulation Kit

    Deals in Frequency Response Analyzer, MERCURY ANALYZER, handheld xrf metal analyzer, Ion Analyzer, thermogravimetric analyzer, Hand Held Gas Analyser, Gm Counter, surface area analyzer, Blood Chemistry Analyzer, Biogas Analyzer, Thermogravimetric Analysis Instrument, Battery Analyzer, Frequency Analyzer, Zeta Pote, medical telescope, Chlorine Monitors, Absorption Analyzers, electrochemical analyzer, Amino Acid Analyz

    Unitech Engineering Services

    Port Blair | More...

  • Amplitude Modulation Kit

    Deals in X-band Microwave Test bench (8.2 to 12.4 Ghz), Amplitude Modulation Kit, WR-15 Standard gain Horn Antenna, PAM Modulation Kit, Rectangular To Circular Transition, Waveguide Horn Antenna, C-band Micro strip Trainer kit (4 to 6 Ghz), Ku-band Microwave Test bench, Basic Antenna Trainer Kit, K-band Microwave Test bench, PAM Demodulation Kit, fixed attenuator, Attenuators-SICO, Sband Micro Strip Trainer Kit, J-ba

  • Tdm Pulse Amplitude Modulation And Demodulation Kit

    Provides Sine waveform output of 250Hz, 500Hz, 1 KHz, and 2 KHz. With Amplitude adjustments of 0 - 5Vp-p. On board 0 to 5V DC source with Amplitude adjustments. Sampling rate of 32 KHz/channel with 8KHz. Channel Identification Signal. On-board features Four Analog Channels TDM Multiplexing/De-multiplexing Clock regeneration at receiver using PLL. 4th order Butterworth Low pass filter with cut off frequency of 3.4 KHz

  • Qam Trainer (vpl-ct-qam)

    • Data Coding : Tri-bit data coding for generating C, Q and I signals from 24 bit user data.
    • Sine & Cosine Carrier Generator : 4.5KHz(approx.).
    • Data Sequence : 24 bit User Selectable data with the help of 3×8 Dip Switches.
    • Cabinet : Enclosed in ABS plastic cabinet with detachable cover.
    • Data Speed : Fixed greater than 4.5 KHz
    • Fault Switches : 4 nos. through 4 way DIP switch for troubleshooting at different blocks.
    • Accessories : Set of Patch Cords, User’s manual.
    • Interconnections : 2/4 mm socket.
    • Test Points : More than 35.
    • Power : 220V AC ±10%, 50/60Hz mains operated.
    • Data Format : Synchronous with carrier

    SALIENT FEATURES On – Board 24 data bit generator On – Board 4 phase generator (sine0, cosine0, -sine & -cosine i.e., 0°, 90°, 180° 270°) On – Board Tribit Encoder - Decoder On – Board data switches for I, C & Q On – Board word clock generator On – Board Input / Output Buffer On – Board Test Points & Fault Switches LIST OF EXPERIMENTS  To study and measure the Data Encoding  To describe the bit sp More...

    Vpl Infotech & Consultants

    Delhi | More...

  • Post your Buy Requirement

  • Delta, Adaptive Delta & Delta Sigma Modulation Demodulation Trainer (vpl-ct-adm)

    • Test Points : More than 55.
    • Power : 220V AC ±10%, 50/60Hz mains operated.
    • Interconnections : 2/4 mm socket.
    • Accessories : Set of Patch Cords, User’s manual.
    • Sampling Frequencies : 32 KHz, 64KHz, 128KHz, 256KHz, (switch selectable).
    • Cabinet : Enclosed in ABS plastic cabinet with detachable cover.
    • On – Board Generator : Synchronized & Adjustable Amplitude Sine wave Generator at 250Hz, 500 Hz, 1KHz, 2KHz, Separate variable D.C. Level.
    • Crystal Frequency : 4.096 MHz.
    • LP Filters : 4th order Butterworth (3.4 KHz cut off frequency).
    • Integrator : 4 Integrator gain setting norm, X 2 X 4 X 8.

    SALIENT FEATURES Both Transmitter & Receiver on same board. Clock generation from crystal. 4 switch selectable sampling rates. On – Board Generators at 4 different frequencies (Synchronized). Separate Adjustable DC Level. Selectable integrator gain setting (by switch or control circuit). On – Board 4th order butter worth L.P. Filter. Unipolar to Bipolar conversion On – Board.     LIST OF EXPERIMENTS  Delta M More...

    Vpl Infotech & Consultants

    Delhi | More...

  • Data Reformatting & Carrier Demodulation Receiver Trainer (vpl-ct-drcm)

    • Output : 2 Channel TDM Multiplexed Data Stream.
    • Power : 220V AC ±10%, 50/60Hz mains operated.
    • Input : From Transmitter Kit.
    • Interconnections : 2/4 mm socket.
    • Bi phase clock recovery : by PLL.
    • Accessories : Set of Patch Cords, User’s manual.
    • Test Points : More than 50.
    • De conditioning Options : NRZ (M), RZ, AMI, RB Bi phase (Manchester), Bi phase (Mark), differentially encoded dibit pair to NRZ (L).
    • Cabinet : Enclosed in ABS plastic cabinet with detachable cover.

    SALIENT FEATURES 7 different data conditioning formats NRZ (M) RZ, Bi phase (Manchester), Bi phase (Mark), AMI, RB, Differentially encoded dibit pair to NRZ data. ASK, FSK, PSK, DPSK, & QPSK carrier demodulation  Output gives 2 channel TDM multiplexed data output On – Board Bi phase clock recovery circuit On – Board data squaring circuit and different decoder   Carrier Demodulation  : –  ASK Rectifier Dio More...

    Vpl Infotech & Consultants

    Delhi | More...

  • Tdm Pulse Code Demodulation Receiver Trainer (vpl-ct-pcdm)

    • Accessories : Set of Patch Cords, User’s manual.
    • Test Points : More than 55.
    • Operating Speed : Fast 240-320 KHz/Channel (approx) Slow 1-1.9 Hz/Channel (approx).
    • Baud rate : Selectable from 300 to 2400.
    • Port : 9 Pin D – type Connector 2 nos..
    • Interconnections : 2/4 mm socket.
    • Cabinet : Enclosed in ABS plastic cabinet with detachable cover.
    • Clock : Regulation by PLL.
    • Demodulation : Pulse Code Demodulation.
    • PC – PC Communication : 2 Channel via RS 232.
    • Power : 220V AC ±10%, 50/60Hz mains operated.
    • Error Correction : Off – Odd Even Parity Hamming Code.
    • Fault Switches : 4 nos. through 4 way DIP switch for troubleshooting at different blocks.
    • Low Pass Filter : Butter worth – 4th order 1.4KHz cutoff frequency (2 nos.).
    • Input Channels : 2 TDM serial Input.

    SALIENT FEATURES Input accepts two channel multiplexed data. On – Board De multiplexed PCM receiver. On – Board L.P. Filters. Fast and slow modes do real time operation & examination of control signal and data on LED. On – Bard Sync code Detector Error check code options: Odd or even parity single bit error detection. Hamming code – single but error detection. 4 switched faults for fault simulation. PC – P More...

    Vpl Infotech & Consultants

    Delhi | More...

  • Data Formatting & Carrier Modulation Transmitter Trainer (vpl-ct-dccm)

    • Power : 220V AC ±10%, 50/60Hz mains operated
    • Test Points : More than 38
    • On – Board Carrier : Sine wave Synchronized to transmit data at 1.44MHz, 960 KHz, (0 deg, phase) 960 KHz (90 deg phase)
    • Accessories : Set of Patch Cords, User’s manual
    • Carrier Modulation : ASK, FSK, PSK, DPSK, & QPSK
    • Input : 2 Channel Time Division Multiplexed Data
    • Interconnections : 2/4 mm socket
    • Data Formatting : NRZ (L), NRZ (M), AMI, RB, Biphase (Manchseter), Bi phase (Mark), differentially encoded dibit air
    • Cabinet : Enclosed in ABS plastic cabinet with detachable cover

    SALIENT FEATURES On – Board Carrier generation circuit (Sine waves Synchronized to transmitted data) On – Board in phase and quadrature Phase Carrier for QPSK modulation Different data conditioning formats NRZ (L), NRZ (M) RZ, BiPhase (Manchestor), Bi Phase (Mark), AMI, RB,  Differentially encoded dibit pair ASK, FSK, PSK, DPSK, & QPSK Carrier modulation Variable carrier and modulation offset On – Board 8 b More...

    Vpl Infotech & Consultants

    Delhi | More...

  • Tdm Pulse Code Modulation Transmitter Trainer (vpl-ct-pcm)

    • Modulation : Pulse Code Modulation
    • Multiplexing : Time Division Multiplexing
    • Crystal Frequency : 12/16 MHz
    • Cabinet : Enclosed in ABS plastic cabinet with detachable cover
    • Input Channels : Two
    • Power : 220V AC ±10%, 50/60Hz mains operated
    • Port : 9 Pin D – type Connector 2 nos.
    • Test Points : More than 45
    • Fault Switches : 8 nos. through 8 way DIP switch for troubleshooting at different blocks
    • Error Check Code Off – :  Odd – Even – Hamming
    • Sync Signals : Pseudo Random Sync. Code Modulation
    • Operating Modes : Fast 240 KHz / Channel (approx) Slow 1 KHz Channel (approx)
    • PC – PC Communication : 2 Channel via RS 232
    • Baud rate : Selectable from 300 to 2400
    • Interconnections : 2/4 mm socket
    • Accessories : Set of Patch Cords, User’s manual

    SALIENT FEATURES Crystal controlled Clock & Sine Generator (Synchronized) 2 TDM Analog channels Error Check code option (Odd – Even parity, Hamming code) 4 switched faults can be used for error check & fault simulation. PC – PC communication via RS 232   On – Board Generators  : – Adjustable Amplitude sine Generator of 500Hz & 1KHz  (synchronised) 1 & 2 KHz synchronized frequency (optional) – Variable A More...

    Vpl Infotech & Consultants

    Delhi | More...

  • Tdm Pulse Code Demodulation Kit

    features: 2 channel time division demultiplexed pulse code modulation receiver. mode of operation fast (240 khz/channel approx) & slow (1hz. /channel approx.) pseudo random sync. code generator for frame synchronization. receiver clock generation using pll error detection of none, even, odd, hamming error correction using hamming code technique none, even, odd, hamming parity selections two nos. of 4th order butterwo

  • Qam And Dqam Demodulation Kit

    Receiver clock generated using PLL method Data Format (Decoding) using NRZ-L technique Tribit Decoded data (I , Q & C) Differential Decoded I & Q Bits. Carrier Demodulation Techniques using QAM, DQAM Demodulation On-board features QAM/DQAM Demodulation using PLL and Envelop detectors.

  • Ask Demodulation Trainer Kit

    we are engaged in offering our valued patrons high-quality ask modulation and demodulation trainer kit . With our kit, the customers for the study of amplitude shift keying modulation and demodulation of the signal. We are trusted by global communities, for our high-performing kit. It has some important features like different test points, ic based circuits, and patch cords. The price at which we offer this product i

    Technolab Of Engineers

    Howrah | More...

  • Tdm Pulse Code Modulation Kit

    features: provides sine waveform output of 500hz, 1 khz with amplitude adjustments of 0 - 5vp-p. two nos. Of variable dc source with amplitude adjustments. mode of operation fast (240 khz/channel approx) & slow (1hz. /channel approx.) 2 channel time division multiplexed pulse code modulation transmitter. none, even, odd, hamming parity selections pseudo random sync. Code generator for frame synchronization. pll for b

  • Bpsk/dpsk And Depsk Modulation/demodulation Kit

    Features: Provides synchronized Sine waveform output of 500KHz(0 deg.), 500KHz(180 deg.) On board 8 bit variable NRZ-L pattern Data Simulator using 8 way DIP switch. Clock frequency of 250 KHZ Data Format (Coding) of NRZ-L & Differential Encoded NRZ-L. Carrier Modulation Techniques using BPSK, DPSK, DEPSK modulation On-board features Square Looping Technique used in Demodulation section Carrier Demodulation Technique

  • Qpsk And Dqpsk Modulation Kit

    Features: On board 8 bit variable NRZ-L pattern Data Simulator using 8 way DIP switch. Clock frequency of 250 KHZ . Provides synchronized Sine waveform output of 500KHz(0 deg.), 500KHz(90 deg.), 500KHz(180 deg.), 500KHz(270deg.) Data Format (Coding) using NRZ-L technique Dibit Pair (I & Q), Differential Encoding of I & Q Bits. Carrier Modulation Techniques QPSK, DQPSK modulation (

  • Phase Shift Keying Modulation Kit

    4,200/Piece(s)

    Object: to study the generation of the phase shift keyed output and also to demodulate the psk output features: the board consists of the following built-in parts : �ñ 5v d.c. At 100ma ic regulated power supply internally connected op-amp ic decade counter ic quad op-amp. Ic multiplexer ic quad, 2-input ex-or gate ic mains onoff switch, fuse and jewel light the unit is operative on 230v �ñ

  • Qpsk/dqpsk Modulation Kit

    Features: On board 8 bit variable NRZ-L pattern Data Simulator using 8 way DIP switch. Clock frequency of 250 KHZ . Provides synchronized Sine waveform output of 500KHz(0 deg.), 500KHz(90 deg.), 500KHz(180 deg.), 500KHz(270deg.) Data Format (Coding) using NRZ-L technique Dibit Pair (I & Q), Differential Encoding of I & Q Bits. Carrier Modulation Techniques QPSK, DQPSK modulation

  • Pam/pwm/ppm Modulation/demodulation Kit

      Provides Sine waveform output of 250Hz, 500Hz, 1 KHz, and 2 KHz with Amplitude adjustments of 0 - 5Vp-p Switch selectable sampling clock of 4, 8, 16, 32 KHz. On-board features Analog Sample Circuit/Output, Sample & Hold Circuit/Output, Flat Top Circuit/Output 4th order Butterworth Low pass filter with cut off frequency of 3.4 KHz. PAM, PWM, PPM modulation & demodulation

  • Ask Modulation Trainer Kit

    we are engaged in offering our valued patrons high-quality ask modulation and demodulation trainer kit . With our kit, the customers for the study of amplitude shift keying modulation and demodulation of the signal. We are trusted by global communities, for our high-performing kit. It has some important features like different test points, ic based circuits, and patch cords. The price at which we offer this product i

    Technolab Of Engineers

    Howrah | More...



Related Products

Logic Analyzer | Laser Power Meter | Digital Data Logger | Electrical Machine Trainer

Post your Buy Requirement


Is this page helpful?