Indian Precision Engineers

Konanakunte, Bangalore, Karnataka

We are offering spring applied brakes.The braking of high flywheel inertia is possible by the brakes with large heat capacity and high heat dissipation.The electromagnetic fail safe brakes are designed to interrupt the torque transmission in the event of power failure. The braking torque is applied by spring force when power supply to the coil is interrupted.These brakes meet the requirements in machine tools, winches, conveyors etc, where for safety reasons, instant and reliable braking is required. The braking torque is produced by multiple coil springs acting on the plates and released by the magnet coil.Torque range 7.5 nm --- 350 nmvoltage 24 v.d.c

We are offering torque limiters. Safety clutches are used as safety devices to protect large components from overload in machine tools. Safety clutches are designed to be used as safety devices and have proven successful in machine tool and other industries in eliminating torque peaks. They protect gears, shafts, and other machine elements against over load and breakage. The actuation pressure is produced by multiple springs, and the clutches are adjustable within certain limits to meet variations in required drive or slipping torque. Safety clutches are tailor made suitable to customer requirements.Clutches are supplied with either dry or wet running.Torque range: 05 nm --- 500 nm

Our Electromagnetic Fail Safe Brakes are designed with perfection to interrupt the torque transmission in the event of power failure. The braking torque is applied by the spring force when supply to the coil is interrupted. These Electromagnetic Fail Safe Brakes are suitable for both wet and dry conditions. The operating voltage of Electromagnetic Fail Safe Brakes can be modified as per the requirements. Suitable For

• Both wet and dry applications

Torque range

• 10 Nm-500 Nm

Voltage

• 24 V DC

Holding Electromagnets are D C operated units that generate an electromagnetic field when an electric current passes into the device. Holding Electromagnets are used for the purpose of holding or manipulating the ferrous material. These Holding Electromagnets are applied in automations such as sorting machine, assembly line, mechanical arm, etc. The force range of Holding Electromagnets is 380N 7500 N and the voltage on which they operate is 12 / 16 /24 V D C. Specifications

• Force Range : 380N 7500 N
• Voltage : 12 / 16 /24 V D C

Telescopic Brushes are used for feeding DC voltage to clutches. We provide more than 100 types of Telescopic Brushes and inserts that are used on Electromagnetic Clutches, which are equal to ZF type SK4, TSN 8, TSN 6/16, and TSL with extended length. Our Telescopic Brushes are available with shock-proof and light weight holders. We make available Telescopic Brushes of different brands like Stromag, Ortlinghaus, Heid and other international brands.

We also manufacture large quantity of clutch plates to a variety of customer specification and sizes. The Plates are supplied in three basic combinations.

• Steel / Steel
• Steel / Sintered Lining
• Steel / Organic Friction Lining

Our Plates are employed in a large variety of applications such as automatic or manual gearbox for highway vehicles, main drive boxes for tractors, winch drives, machine tool transmissions, marine reversing gears and general engineering. We keep Most of the plates in stock.

Solenoids basically are electrical devices used to convert electrical energy into linear mechanical motion. The energy produces within a solenoid can either be used to provide a straight linear pulling action, or it may be converted to provide rotary action. In either case the magnetic pull force increases as the air gap is reduced between armature and core.
We offer the following type of solenoids in variety of sizes.

• Single Action linear Solenoid  --- A linear stroke motion from the start position to the end position. The return action is effected by some other external force / mechanism. Depending on the solenoid design, the force can be applied in a ‘PUSH’ or ‘PULL’ sense.
• Double Acting Linear Solenoid  --- This in effect is two solenoids back to back, the stroke obtained by energizing in one of the two opposing directions from neutral.
• Rotary Solenoid   --- Utilizes rotary motion from a neutral position when the solenoid is energized. Standard travel is 25 - 95º. Return action is via some other external means.

Various factors and their relations such as Force, Stroke, Duty cycle, pushing or pulling should be considered when selecting the right solenoid. Our D.C. Solenoids are most often sought by industrial segments for various applications such as automations, printing, packaging, textile, elevators, Automobile industries and general machine tools. 

Multidisc clutches/brakes are known for their smooth acceleration. high operating performance. They are surrounded by magnetic field. These type of clutches requires no maintenance. particularly suitable for wet applications. The special feature of all our multi disc clutches/brakes are that the outer periphery of the outer plates are provided with finger springs which help in faster disengagement. minimal residual torque. These Clutches / Brakes are being extensively used by original equipments machine tool manufacturers, SPM Builders, Printing and packaging industries, textile industries etc.

 

Mechanical Clutches are used in most engineering sectors such as machine tools, marine engineering, earth moving equipments and construction machinery depending on the requirements. The clutches are available for wet and dry running. Types:

• Multi plate single acting clutches with standard sleeve flange, shoulder, cup or hub housing.

Safety clutches are used as safety devices to protect large components from overload in machine tools. Safety Clutches are designed to be used as safety devices and have proven successful in machine tool and other industries in eliminating torque peaks. They protect gears, shafts, and other machine elements against over load and breakage. The actuation pressure is produced by multiple springs, and the clutches are adjustable within certain limits to meet variations in required drive or slipping torque. Safety clutches are tailor made suitable to customer requirements. Clutches are supplied with either dry or wet running.

Electromagnetic Multi Disc Brakes offered by us are known for their smooth acceleration and high operating performance. For faster disengagement and minimal residual torque, these Electromagnetic Multi Disc Brakes have high quality finger springs installed. We manufacture our Electromagnetic Multi Disc Brakes adhering to industrial parameters, and with fluctuating voltage endurance. Electromagnetic Multi Disc Brakes: Types Available

• Plates surrounded by magnetic field: For wet applications
• Plates not surrounded by magnetic field: For dry applications

Torque range

• 10 Nm-1600 Nm

Voltage

• 24 V DC

With complete help and support of our team members, we deliver high grade and excellent range that commensurate to globally accepted standards. We are a high-flying name when it comes to superlative Electromagnetic Brakes!