Our Products
We offer Panels with diverse specification options for a highly customzed panels upto 6300 amps having fixed and draw out types, including single/double front type. The LT Panels conform to IS 8623-part 1:1993 & IEC 439-1:1985.
Our panels are designed to withstand high humidity, temperature, ambient service conditions and short circuits levels & these make our panels an ideal choice.
Our panels provides superior control & protection of low voltage power equipment & circuits in utility, industrial, commercial installations involving generators, motors, feeder circuits and distribution.
An electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. Such panels are used in industries both for internal and external use and therewfore are quite rugged to withsatnd different climatic conditions. Our LT Panels are designed to work with low electricity consumption that makes them cost effective.
These panels work between two or more different power sources like DG sets to manage power supply. Synchronization helps in making different DG sets behave as a virtual single unit and eliminates sub-division of total load. It helps in transferring loas from one unit to another as during service period, so that the unit requiring service can be easily shut off. In this way the critical load need not be interrupted and there is no production loss. During low load we can run any single unit and synchronize more units as the load increases automatically.
Features
Safety
We manufacture quality Coverter Duty transformers up to 10 MVA capacity in Oil cooled type having various voltage and current ratings as per the relevant IS standard.
Besides all standard fittings as specified in IS standard, optional fittings such as low/high frequency, short circuit and overload protections / cutoffs can be provided as per customers requirement.
We are leading manufacturers of Industrial Voltage Controllers offeringVariac / Dimmer TypeandLinear / Rolling Contact TypeServo Voltage Controllers or LT Automatic Voltage Regulators (LT AVR) conforming to IS: 9815/1994 with latest amendments or as per customer's specifications.
These are designed to overcome and control voltage fluctuations due to diverse loading duties and line losses arising in transmission & distrbution network.
Servo Voltage Controllers are virtually required at all such places where controlled and constant voltage is one of the most important requirements and are suitable where breakdown due to voltage fluctuation results in heavy financial losses such as Hospitals, Laboratories, Various Life Saving & Testing Equipments, Pharmaceuticals, Research Institutes, Defense, Telecommunications, Air Conditioning, Data Processing, Electronics based Industries, Educational Institutes, Food Processing Units, Paper plants, Footwear and Leather Industries, Cement Plants, Textile Industries, Moulding Units, Hotels, Farm Houses, Offices and Residences/ Housing Apartments, etc.
Variac / Dimmer Type |
Linear / Rolling Contact Type |
Input Voltage Range (3 phase) |
Output Voltage (3 phase) |
Average Correction Rate |
Response Time |
Freq. Range |
Efficiency |
Temperature Rise |
Type |
Operating Mode |
Oil Filled Type |
Dry Type |
Contol Panel |
Protections (optional as per customer's requirement) |
It is seen that despite best efforts by many electricity boards / supply undertakings, due to diverse loading duties arising in transmission and distribution network, voltage at consumer's end is never constant.
This low/high voltage is applied to all electrical machines like Transformers, Motors, etc., hence causing loss in substantial electrical energy. Besides voltage fluctuations also play havoc by damaging expensive, sophisticated, CNC/PLC controlled equipment, lighting, elevators, etc. Therefore arising a need to conserve energy as power tariff is ever increasing.
We manufacture HT-AVR that are designed to overcome & control voltage fluctuations due to diverse loading duties & line losses arising in transmission & distribution network. These are designed for balanced as well as unbalanced loads & input voltage supplies.
HT-AVR operates ON Load directly on the HT line and provides a stabilized HT output voltage +/-1% that is fed to the step down transformer resulting in constant/stable LT output. The line diagram is given below showing the same.
Key Features
We manufacture quality Isolation & Ultra Isolation transformers up to 2000 KVA capacity in Air/Oil cooled type having various voltage and current ratings as per the relevant IS standard.
These Isolation transformers are of double wound with electrostatic shielding in between primary, secondary & magnetic core. EC grade copper, high grade CRGO & best quality insulation material is used resulting into low temperature rise. The main features of these transformers are to isolate the high voltage transients, spike noise, EMI interference and DC leakage. These are designed for good common mode noise rejection, coupling capacitance, DC galvanic isolation and good voltage regulation. These can also be designed for step down or step up or 1:1 ratio.
Besides all standard fittings as specified in IS standard, optional fittings such as low/high frequency, short circuit and overload protections / cutoffs can be provided as per customers requirement.
We manufacture fully Automatic Line Voltage Correctors that are designed to overcome & control voltage fluctuations due to diverse loading duties & line losses arising in transmission & distribution network. Our ALVC conforms to IS: 8448/1989 reaffirmed 2003.
Advantages
Feature
We manufacture various modules of Indoor/Outdoor type Compact Sub-Stations upto 2500 KVA capacity, 33KV class of transformers with HT/LT switchgears.
The Compact Sub-Station (CSS) is also known as Unitised Sub-Station (USS) or Packaged Sub-Station (PSS). The Compact Sub-Staton is a compact arrangement, which replaces conventional sub-station arrangement consisting of Load Break Switch / Vacuum Circuit Breaker, Transformer, Distribution Panel, Lightening arresters mounted on a pole structure or on a platform.
CSS is designed, keeping in mind the personal safety & aesthetics, considering HT equipment is located in high density urban places. It is a pre fabricated secondary sub-station consisting of three compartments (i.e.) H.V.Compartment which houses Vacuum Circuit Breaker (VCB) or Load Break Switch (LBS), the transformer compartment which houses dry type /oil cooled transformers & the LV compartment which houses ACB, MCCB, SFU etc. as per client's requirement. All components are housed in an enclosure which protects the equipment against environmental hazards & unauthorized access . The electrical equipments are cooled by natural ventilation.
We manufacture Load Break Switches (LBS) in three pole, manual / motorised operated upto 33KV range. Our LBS is simple but robust design with trouble free mechanism. These are used in application like transformer switching, ring main gears (RMG), condensers, etc.
We offer LBS that can be make / break the normal rated current and make the short circuit current. The design of Load Break Switch is user friendly and easy in operation reliable function. Load Break Switches are manufactured in accordance with IS 9920 / IEC 265.
We manufacture quality Rectifier Duty transformers up to 10 MVA capacity in Oil cooled type having various voltage and current ratings as per the relevant IS standard.
Besides all standard fittings as specified in IS standard, optional fittings such as low/high frequency, short circuit and overload protections / cutoffs can be provided as per customers requirement.