Our Products
Shaft Mounted Wheel brushes provide lighter brushing action and Superior finish when cleaning, removing rust and paint, smoothing, Cleaning fettling from cast seams, light Deburring. They are ideal for cleaning polishing and finishing of joints/weld joints or corners and areas that are hard to reach. The standard 6mm shaft attachment makes it an easy to use product with any hand drill.
Shaft Mounted Wheel Brush
Fill Type :1) S. : Steel Wire, Natural hard, crimped.2) S.T : Steel wire, Straight.3) S.S : Stainless Steel Wire, Acid Resistant, Crimped or Knotted.4) B. : Brass wire, Crimped.5) B.S : Brass Plated Steel Wire, Crimped.6) A. : Abrassive Filaments, silicon carbide, or oxide aluminium crimped, grit sizes: 80-320.
ABRASIVE WHEEL BRUSH
Sizes :Available in 2" to 4".
Application :Shaft Mounted Wheel brushes provide lighter brushing action and superior finish when cleaning, removing rust and paint, smoothing, cleaning fettling from cast seams, light deburring.
Used on large surfaces where a great deal of roughing is required. Good for corners and angles, and removal of contaminants such as Scale, concrete, slag, and marine growth.
Fill Type :1) S. : Steel Wire, Natural hard, crimped.2) S.T : Steel wire, Straight.3) S.S : Stainless Steel Wire, Acid Resistant, Crimped or Knotted.4) B. : Brass wire, Crimped.5) B.S : Brass Plated Steel Wire, Crimped.6) A. : Abrassive Filaments, silicon carbide, or oxide aluminium crimped, grit sizes: 80-320.
Sizes :Available in 3" to 6".
Application :For use on large surfaces where a great deal of roughing is required. Good for corners and angles, and removal of contaminants such as scale, concrete, slag, and marine growth.
Disc brushes are the brush of choice for Deburring precisely ground Flat parts; saw cut parts, machined surfaces and other applications Where sharp edges need to be removed without dimensionally Changing the work piece.
Sizes :Available in all sizes as per drawing & specifications.
Application :Disc brushes are the brush of choice for deburring precisely ground flat parts, saw cut parts, machined surfaces and other applications where sharp edges need to be removed without dimensionally changing the work piece.
Nylon strip brushes feature a formable metal structural element known as the channel base, and nylon/metal brush fill that can be varied by trim length, density, and flexibility. A brush strip filled with nylon filament is often used as a flexible brush seal on equipment. A strip brush functions as a flexible shield and curtain against mist, dust, light, heat, or intrusion into a point of operation.
Strip Brushes
Sizes :Available in all sizes as per drawing & specifications.
Application :The offered Strip brushes allows the user to cover the maximum angle. We offer these brushes with dense bristles, which are suitable for all kinds of surfaces. Moreover, we provide customized solution of these brushes to our clients as per their requirements. Customers can avail these products from us at affordable rates in comparison to competitors.
The offered roll brushes allow the user to cover the maximum angle. We offer these brushes with dense bristles, which are Suitable for all kinds of surfaces. Moreover, we provide customized Solution of these brushes to our clients as per their requirements.
Spiral Roller Brush
Sizes :Available in all sizes as per drawing & specifications.
Application :The offered roll brushes allows the user to cover the maximum angle. We offer these brushes with dense bristles, which are suitable for all kinds of surfaces. Moreover, we provide customized solution of these brushes to our clients as per their requirements. Customers can avail these products from us at affordable rates in comparison to competitors.
Standard Knotted Twist Wheel Brushes feature knots that are twisted approximately 75% of the length of the trim. The loosely twisted knots cover a larger surface area and are ideal for heavy-duty Cleaning and surface conditioning. Ideal for weld cleaning, Weld spatter removal, scale removal, cleaning, Deburring, and flash Removal. Designed for root and hot pass weld cleaning in pipe joining applications.
KNOTTED TWIST WHEEL BRUSH
Fill Type :1) S. : Steel Wire, Natural hard, crimped.2) S.T : Steel wire, Straight.3) S.S : Stainless Steel Wire, Acid Resistant, Crimped or Knotted.4) B. : Brass wire, Crimped.5) B.S : Brass Plated Steel Wire, Crimped.6) A. : Abrassive Filaments, silicon carbide, or oxide aluminium crimped, grit sizes: 80-320.
Sizes :Available in all sizes as per drawing & specifications.
Application :Standard Knotted Twist Wheel Brushes feature knots that are twisted approximately 75% of the length of the trim. The loosely-twisted knots cover a larger surface area and are ideal for heavy-duty cleaning and surface conditioning. This is for weld cleaning, weld spatter removal, scale removal, cleaning, deburring, and flash removal.
STRINGER KNOTTED WHEEL BRUSH
Fill Type :1) S. : Steel Wire, Natural hard, crimped.2) S.T : Steel wire, Straight.3) S.S : Stainless Steel Wire, Acid Resistant, Crimped or Knotted.4) B. : Brass wire, Crimped.5) B.S : Brass Plated Steel Wire, Crimped.6) A. : Abrassive Filaments, silicon carbide, or oxide aluminium crimped, grit sizes: 80-320.
Sizes :Available in all sizes as per drawing & specifications.
Application :Stringer knotted wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is desired for controlled, confined surface contact area.
Standard Knotted Twist Wheel Brushes feature knots that are twisted approximately 75% of the length of the trim. The loosely twisted knots cover a larger surface area and are ideal for heavy-duty Cleaning and surface conditioning. Ideal for weld cleaning, Weld spatter removal, scale removal, cleaning, Deburring, and flash Removal. Designed for root and hot pass weld cleaning in pipe joining applications.
KNOTTED TWIST WHEEL BRUSH
Fill Type :1) S. : Steel Wire, Natural hard, crimped.2) S.T : Steel wire, Straight.3) S.S : Stainless Steel Wire, Acid Resistant, Crimped or Knotted.4) B. : Brass wire, Crimped.5) B.S : Brass Plated Steel Wire, Crimped.6) A. : Abrassive Filaments, silicon carbide, or oxide aluminium crimped, grit sizes: 80-320.
Sizes :Available in all sizes as per drawing & specifications.
Application :Standard Knotted Twist Wheel Brushes feature knots that are twisted approximately 75% of the length of the trim. The loosely-twisted knots cover a larger surface area and are ideal for heavy-duty cleaning and surface conditioning. This is for weld cleaning, weld spatter removal, scale removal, cleaning, deburring, and flash removal.
STRINGER KNOTTED WHEEL BRUSH
Fill Type :1) S. : Steel Wire, Natural hard, crimped.2) S.T : Steel wire, Straight.3) S.S : Stainless Steel Wire, Acid Resistant, Crimped or Knotted.4) B. : Brass wire, Crimped.5) B.S : Brass Plated Steel Wire, Crimped.6) A. : Abrassive Filaments, silicon carbide, or oxide aluminium crimped, grit sizes: 80-320.
Sizes :Available in all sizes as per drawing & specifications.
Application :Stringer knotted wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is desired for controlled, confined surface contact area.
Removable of rust, corrosion, paint & primer and generally to produce clean surface.
Shaft Mounted Cup Brushes are especially effective on aluminum, Cast iron, brass, copper and hardened steel. Good for corners and angles, and removal of contaminants such as weld spots, burr, rust and corrosion. The standard 6mm shaft attachment makes it an easy to use product with any hand held drill.
Fill Type :1) S. : Steel Wire, Natural hard, crimped.2) S.T : Steel wire, Straight.3) S.S : Stainless Steel Wire, Acid Resistant, Crimped or Knotted.4) B. : Brass wire, Crimped.5) B.S : Brass Plated Steel Wire, Crimped.6) A. : Abrassive Filaments, silicon carbide, or oxide aluminium crimped, grit sizes: 80-320.
Shaft Size :Standard 6mm
Shaft Height :Standard
Sizes :Available in 2" to 5".Also available in all sizes as per drawing & specifications.
Application :Shaft Mounted Cup Brushes are especially effective on aluminum, cast iron, brass, copper and hardened steels. For use on straight grinders, flexible shafts, and power drills.