Post Buy Requirement
Industrial Consultant Corporate
Pune, Maharashtra, India
gstGST : 27AINPP8446N1Z9 Verified Add Review

Products / Services

PIR Sensor

750 - 1,200 /Each Get Latest Price
  • Good quality sensor element white ABS plastic body
  • compact size good aesthetical look
  • ceiling or wall mounting option , low power consumption

We are offering sensor, sensor switch, pir, motion sensor, occupancy sensor, energy saving, energy saver. The pir sensor is used to curtail wastage of electrical energy. This passive infra-red sensor detects heat radiated from moving persons objects and uses this ability to automatically switch on or off lights, air conditioners etc these products can be used in all places where electrical energy is wasted in absence of human presence, like office cabin, back office area, lobby, conference room, changing room, recovery room, cloak room, corridor, staircase, storage places, warehouse, car parking, toilet, kitchen, pantry, garden, etc. to know more about the product please read the following, the sensors installed will detects when somebody or a moving object ( say a car in car parking area opening of a door ) enters in its detection range and will switches on the lights and will turned off the lights when person leaves out the movement stops. Clearly, the sensor is intended to operate lights at an area corresponds to movement occupancy. I.e. On the lights when there is movement occupancy and off the lights when there is no movement occupancy. Apart from this energy saving aspect, it also offers a convenience that it is not needed to often switch on or off the lights; it is in automatic operation. there are three knobs in the sensors, the lux knob, the time knob and the sensitivity knob. The lux knob is used to make the lights on at a desired lux level. The time knob is used to make the light lights off at a desired time period ( of 1 minute to 15mnts). Ex: if the time is set for 3minutes, the lights will turn off after 3 minutes, if there was a movement at the end of 2minutes, then the lights will be off only after 5minutes(=3+2). This way if there is an occupancy movement in the detection area distance the lights will remain on. The sensitivity knob is used to increase decrease the detection distance area. Every sensor has a detection distance, ( for the ceiling mount sensor, when erected at a height of 3.00 mtrs, it covers a an area of 6mtr radius) it can be mounted on ceiling wall, the mounting height varies from 1.8 mtr to 3.8 mtrs. An electrician can easily install this device. Every sensor is attached with an installation manual showing connection diagram.

Additional Information:

Payment Terms :

View Complete Details

Motion Sensor LED Luminaire

  • Warranty 2years
  • Sensor Type Microwave
  • Lumen Output 1800 Lumens
  • Size 40 x 600mm
  • Input voltage 180volts to 265Volts
  • Driver efficiency Greater than 85%
  • Surge Protection 3.5KVA

Features :



  • Color rendering index greater than 75

  • Detection range 360degree x 8mtrs

  • Installation height: 5 to 8 Mtrs

  • Wattage at bright 15watts

  • Wattage at dim 3watts

  • Bright to dim time 1minute

  • Power factor greater than 0.9

Brochure


Download Detail File : Click Here
View Complete Details

PIR Motion Sensor Switch SM04

750 - 2,100 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Set(s)
  • Material ABS PLASTIC
  • Voltage 230VAC
  • Operating Temperature 60-80deg C
  • Frequency 50HZ
  • Power 10-15Amp
  • Connector Sensor Switches
  • Hole Diameter Holes not required
  • Setting Range Not applicable
  • Brand Name PIR MOTION SENSOR SM04
  • Size COMPACT
  • Application ENERGY SAVING DEVICES
  • Max. Current 16 AMPS
  • Max. Voltage 220-240 VOLTS
  • Mechanical Life 2 YRS
  • Color WHITE

PIR Motion Sensor (Model : SM04) are energy saving devices used for home energy saving and industrial energy saving. This infrared motion sensor switch detects movement like human movement, opening of a door, movement of a car in a car parking area and keeps the lights, fans etc ON. IT turns OFF the appliances when itsdetection area is vacant, saving a considerable amount of energy.



Features



  • (dual sensor element) Top


quality Fresnel lens,



  • Relay Protection circuit



  • Detection range: 360degree x12 mtrs



  • ON time adjustable from 10 SEC. TO 15 MINUTES (10, 30, 90 second And 3, 7, 15 minute).



  • Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level.

Additional Information:

Payment Terms : L/C

Packaging Details : BOX

Delivery Time : IMMEDIATE

View Complete Details

Programmable Time Switch

  • Min. Order (MOQ) 1 Piece(s)
  • Max. Voltage 220V, 240V
  • Application Switching USe
  • Max. Current 10-15amps, 15-20amps
  • Feature Accuracy, Adjustable, Durable, High Quality, Long Working Life, Optimum Efficiency
  • Working Pressure 12kg/cm2, 3kg/cm2

This programmable Time Switch is a 24 hour timer switch with multiple inputs and outputs and can be used for automatic lighting control, street lights control, air conditioner controls etc. The device control different electrical circuits automatically as per user defined time settings. Four circuits can be controlled independently. Each circuit can be programmed with four different programmes in a day (four ON and four OFF) and in seven different ways in a week. The output can again be over ride with out put control programmes / menu. The device can be connected to input devices such as motion sensors and day light sensors.

Application : The product finds application in controlling street lighting circuits, garden lights, shop floor lighting, outdoor lightings, housing societies common lighting, car parking lighting, hoardings, sign boards, air conditioning circuits etc.

Specification :

  • Rated voltage : 440V AC, 3 phase, 50Hz.
  • For controlling higher loads the product can be used with power contactors.

Additional Information:

Delivery Time : immediate

Brochure


Download Detail File : Click Here
View Complete Details

Street Light Control Panel

  • Application Control Panel
  • Power 1-3kw, 3-6kw, 6-9kw, 9-12kw
  • Power Source Electric
  • Phase Double Phase, Single Phase, Three Phase
  • Autoamatic Grade Automatic
  • Warrenty 5 Years

This street lighting control panel can be used for automatic light control, street lighting control and industrial lighting controls. This Programmable Lighting Control Panel can again be used as an air conditioner control panel also. With this electricity energy saver product, four or more electrical circuits can be controlled simultaneously and independently. Each circuit can be turned ON / OFF four times in a day (for ON and four OFF) as per user defined time settings. User can have different ON / OFF timings from Monday to Sunday. The device can be connected to input devices such as motion sensors and day light sensors.

Features : Out put is through 32 amps, 3phase 4 pole power contactors (4 Nos). 32Nos of terminal blocks for cable IN and OUT, Clock Display, battery back up. Panel size: 230mm (Depth)x 550mm (Width) x700mm (Height), made of 16SWG CRCA sheet, powder coated, double door with glass window and locking arrangement. Option for manual operation, Astronomical ON/OFF of circuits. 24 months warrantee. custom made units are also available

Specification : Rated voltage : 440V AC, 3 phase, 50Hz.

Application : The product finds application in controlling street lighting circuits, Garden lights, Shop floor lighting, outdoor lightings, Housing societies common lighting, car parking lighting, hoardings, sign boards, air conditioning circuits etc

View Complete Details

Programmable Panel

  • Model No. PLP4

This programmable panel can be used for controlling differ-ent electrical circuits automatically as per user setting. Four circuits can be controlled independently. Each circuit can be programmed with four different programmes in a day (four ON and four OFF) and in seven different ways in a week. The output can again be over ride with out put con-trol programmes / menu. The device can be connected to input devices such as motion sensors and day light sensors

Features :
Out put is through 32 amps, 3phase 4 pole power contactors (4 Nos). 32Nos of terminal blocks for cable IN and OUT, Clock Display, battery back up. Panel size: 230mm (Depth)x 550mm (Width) x700mm (Height), made of 16SWG CRCA sheet, powder coated, double door with glass window and locking arrangement. Option for manual operation, Astronomical ON/OFF of circuits. 24 months warrantee. custom made units are also available.

Application
The product finds application in controlling street lighting circuits, Garden lights, Shop floor lighting, outdoor lightings, Housing societies common lighting, car parking lighting, hoardings, sign boards, air conditioning circuits etc.

Brochure


Download Detail File : Click Here
View Complete Details

PIR Motion Sensor (Model : SM04)

  • Supply voltage 220 to 240 volts
  • Frequency 50 / 60Hz,
  • Safe Load 500watts
  • Detectable motion speed 0.6 to 1.5 mtr/sec
  • Relay capacity 16 Amps at 2 2 0 to 240 volts

Features :



  • Very attractive shape & compact size, White ABS plastic body,

  • Good quality sensor element (dual sensor element) Top quality Fresnel lens,

  • Relay Protection circuit

  • Detection range: 360degree x 12 mtrs

  • ON time adjustable from 10 SEC. TO 15 MINUTES (10, 30, 90 second And 3, 7, 15 minute).

  • Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level.

Brochure


Download Detail File : Click Here
View Complete Details

Industrial Electrical Contractor

ICC is a reputed Electrical Contractors offering electrical turnkey projects, maintenance contracts, electrical contract services for the industrial and commercial sectors in India. We are a Pune based company having a wide clientele on a pan-India basis. Our success among stiff competition is a result of a robust infrastructure, which in turn is managed by a team of expert professionals. Understanding the ever-changing dynamics of the market, our objective is to change the face of electrical installations and support our client with the best quality and professional service. We ensure that clients always have an up-to-date system functioning through our services that are rendered at the best rates in the industry.

Owing to vast technical expertise, we have been doing time bounded project & maintenance works in sugar factories, cement factories, power plants, chemical and other process industries, infrastructure projects, high-rise commercial buildings etc. Our experienced team has been playing a pivotal role in achieving the new heights of success. We have recruited the best talents in the organizations, who are well versed with every aspect of rendering effective services. All their industrious efforts lead to provide utmost level of satisfaction to the clients.

We are backed by high technology equipment and tools that assist us in executing the projects effectively.


Why Us?

  • Rich industry experience
  • Team of well qualified experts
  • Timely completion
  • Totally client centric approach
  • Economical rates
View Complete Details

PIR Motion Sensor (Model : SM02)

PIR Motion Sensor (Model : SM02)  are energy saving devices used for home energy saving and industrial energy saving. This infrared motion sensor switch detects movement like human movement, opening of a door, movement of a car in a car parking area and keeps the lights, fans etc ON. IT turns OFF the appliances when its detection area is vacant, saving a considerable amount of energy.

Features

  • Very attractive shape & compact size, White ABS plastic body,
  • Good quality sensor element (dual sensor element) Top quality Fresnel lens,
  • Semi conductor re-settable fuse,
  • Short circuit and supply surge protection, Zero cross switching,
  • Ceiling / wall mounting option - Can be erected on ceiling or wall,
  • Detection range : 360degree x 8 mtrs
  • ON time adjustable from 70 seconds to 20 min,
  • Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level.
  • Detection area adjustable from low to high
  • 24 months warrenty.


Specifications

  • Supply voltage : 230 volts +/- 10%age
  • Safe Load : 500watts
  • Detectable motion speed : 0.5 to 1.5 mtr/sec

Brochure


Download Detail File : Click Here
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • D. Sathya Babu (Industrial Consultant Corporate)
  • Survey No: 7/3, Flat No: 14, Building No: 15, Rakshak Nagar Phase-1, Near Zensar, Kharadi, Pune-411 014, Maharashtra. - 411014
  • Share us via
  • Call 08068051317 Ext. 357
programmable panel Retailer from Pune, Maharashtra
Post Buy Requirement
Industrial Consultant Corporate
Pune, Maharashtra, India
gstGST : 27AINPP8446N1Z9 Verified Add Review

Products / Services

PIR Sensor

750 - 1,200 /Each Get Latest Price
  • Good quality sensor element white ABS plastic body
  • compact size good aesthetical look
  • ceiling or wall mounting option , low power consumption

We are offering sensor, sensor switch, pir, motion sensor, occupancy sensor, energy saving, energy saver. The pir sensor is used to curtail wastage of electrical energy. This passive infra-red sensor detects heat radiated from moving persons objects and uses this ability to automatically switch on or off lights, air conditioners etc these products can be used in all places where electrical energy is wasted in absence of human presence, like office cabin, back office area, lobby, conference room, changing room, recovery room, cloak room, corridor, staircase, storage places, warehouse, car parking, toilet, kitchen, pantry, garden, etc. to know more about the product please read the following, the sensors installed will detects when somebody or a moving object ( say a car in car parking area opening of a door ) enters in its detection range and will switches on the lights and will turned off the lights when person leaves out the movement stops. Clearly, the sensor is intended to operate lights at an area corresponds to movement occupancy. I.e. On the lights when there is movement occupancy and off the lights when there is no movement occupancy. Apart from this energy saving aspect, it also offers a convenience that it is not needed to often switch on or off the lights; it is in automatic operation. there are three knobs in the sensors, the lux knob, the time knob and the sensitivity knob. The lux knob is used to make the lights on at a desired lux level. The time knob is used to make the light lights off at a desired time period ( of 1 minute to 15mnts). Ex: if the time is set for 3minutes, the lights will turn off after 3 minutes, if there was a movement at the end of 2minutes, then the lights will be off only after 5minutes(=3+2). This way if there is an occupancy movement in the detection area distance the lights will remain on. The sensitivity knob is used to increase decrease the detection distance area. Every sensor has a detection distance, ( for the ceiling mount sensor, when erected at a height of 3.00 mtrs, it covers a an area of 6mtr radius) it can be mounted on ceiling wall, the mounting height varies from 1.8 mtr to 3.8 mtrs. An electrician can easily install this device. Every sensor is attached with an installation manual showing connection diagram.

Additional Information:

Payment Terms :

View Complete Details

Motion Sensor LED Luminaire

  • Warranty 2years
  • Sensor Type Microwave
  • Lumen Output 1800 Lumens
  • Size 40 x 600mm
  • Input voltage 180volts to 265Volts
  • Driver efficiency Greater than 85%
  • Surge Protection 3.5KVA

Features :



  • Color rendering index greater than 75

  • Detection range 360degree x 8mtrs

  • Installation height: 5 to 8 Mtrs

  • Wattage at bright 15watts

  • Wattage at dim 3watts

  • Bright to dim time 1minute

  • Power factor greater than 0.9

Brochure


Download Detail File : Click Here
View Complete Details

PIR Motion Sensor Switch SM04

750 - 2,100 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Set(s)
  • Material ABS PLASTIC
  • Voltage 230VAC
  • Operating Temperature 60-80deg C
  • Frequency 50HZ
  • Power 10-15Amp
  • Connector Sensor Switches
  • Hole Diameter Holes not required
  • Setting Range Not applicable
  • Brand Name PIR MOTION SENSOR SM04
  • Size COMPACT
  • Application ENERGY SAVING DEVICES
  • Max. Current 16 AMPS
  • Max. Voltage 220-240 VOLTS
  • Mechanical Life 2 YRS
  • Color WHITE

PIR Motion Sensor (Model : SM04) are energy saving devices used for home energy saving and industrial energy saving. This infrared motion sensor switch detects movement like human movement, opening of a door, movement of a car in a car parking area and keeps the lights, fans etc ON. IT turns OFF the appliances when itsdetection area is vacant, saving a considerable amount of energy.



Features



  • (dual sensor element) Top


quality Fresnel lens,



  • Relay Protection circuit



  • Detection range: 360degree x12 mtrs



  • ON time adjustable from 10 SEC. TO 15 MINUTES (10, 30, 90 second And 3, 7, 15 minute).



  • Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level.

Additional Information:

Payment Terms : L/C

Packaging Details : BOX

Delivery Time : IMMEDIATE

View Complete Details

Programmable Time Switch

  • Min. Order (MOQ) 1 Piece(s)
  • Max. Voltage 220V, 240V
  • Application Switching USe
  • Max. Current 10-15amps, 15-20amps
  • Feature Accuracy, Adjustable, Durable, High Quality, Long Working Life, Optimum Efficiency
  • Working Pressure 12kg/cm2, 3kg/cm2

This programmable Time Switch is a 24 hour timer switch with multiple inputs and outputs and can be used for automatic lighting control, street lights control, air conditioner controls etc. The device control different electrical circuits automatically as per user defined time settings. Four circuits can be controlled independently. Each circuit can be programmed with four different programmes in a day (four ON and four OFF) and in seven different ways in a week. The output can again be over ride with out put control programmes / menu. The device can be connected to input devices such as motion sensors and day light sensors.

Application : The product finds application in controlling street lighting circuits, garden lights, shop floor lighting, outdoor lightings, housing societies common lighting, car parking lighting, hoardings, sign boards, air conditioning circuits etc.

Specification :

  • Rated voltage : 440V AC, 3 phase, 50Hz.
  • For controlling higher loads the product can be used with power contactors.

Additional Information:

Delivery Time : immediate

Brochure


Download Detail File : Click Here
View Complete Details

Street Light Control Panel

  • Application Control Panel
  • Power 1-3kw, 3-6kw, 6-9kw, 9-12kw
  • Power Source Electric
  • Phase Double Phase, Single Phase, Three Phase
  • Autoamatic Grade Automatic
  • Warrenty 5 Years

This street lighting control panel can be used for automatic light control, street lighting control and industrial lighting controls. This Programmable Lighting Control Panel can again be used as an air conditioner control panel also. With this electricity energy saver product, four or more electrical circuits can be controlled simultaneously and independently. Each circuit can be turned ON / OFF four times in a day (for ON and four OFF) as per user defined time settings. User can have different ON / OFF timings from Monday to Sunday. The device can be connected to input devices such as motion sensors and day light sensors.

Features : Out put is through 32 amps, 3phase 4 pole power contactors (4 Nos). 32Nos of terminal blocks for cable IN and OUT, Clock Display, battery back up. Panel size: 230mm (Depth)x 550mm (Width) x700mm (Height), made of 16SWG CRCA sheet, powder coated, double door with glass window and locking arrangement. Option for manual operation, Astronomical ON/OFF of circuits. 24 months warrantee. custom made units are also available

Specification : Rated voltage : 440V AC, 3 phase, 50Hz.

Application : The product finds application in controlling street lighting circuits, Garden lights, Shop floor lighting, outdoor lightings, Housing societies common lighting, car parking lighting, hoardings, sign boards, air conditioning circuits etc

View Complete Details

Programmable Panel

  • Model No. PLP4

This programmable panel can be used for controlling differ-ent electrical circuits automatically as per user setting. Four circuits can be controlled independently. Each circuit can be programmed with four different programmes in a day (four ON and four OFF) and in seven different ways in a week. The output can again be over ride with out put con-trol programmes / menu. The device can be connected to input devices such as motion sensors and day light sensors

Features :
Out put is through 32 amps, 3phase 4 pole power contactors (4 Nos). 32Nos of terminal blocks for cable IN and OUT, Clock Display, battery back up. Panel size: 230mm (Depth)x 550mm (Width) x700mm (Height), made of 16SWG CRCA sheet, powder coated, double door with glass window and locking arrangement. Option for manual operation, Astronomical ON/OFF of circuits. 24 months warrantee. custom made units are also available.

Application
The product finds application in controlling street lighting circuits, Garden lights, Shop floor lighting, outdoor lightings, Housing societies common lighting, car parking lighting, hoardings, sign boards, air conditioning circuits etc.

Brochure


Download Detail File : Click Here
View Complete Details

PIR Motion Sensor (Model : SM04)

  • Supply voltage 220 to 240 volts
  • Frequency 50 / 60Hz,
  • Safe Load 500watts
  • Detectable motion speed 0.6 to 1.5 mtr/sec
  • Relay capacity 16 Amps at 2 2 0 to 240 volts

Features :



  • Very attractive shape & compact size, White ABS plastic body,

  • Good quality sensor element (dual sensor element) Top quality Fresnel lens,

  • Relay Protection circuit

  • Detection range: 360degree x 12 mtrs

  • ON time adjustable from 10 SEC. TO 15 MINUTES (10, 30, 90 second And 3, 7, 15 minute).

  • Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level.

Brochure


Download Detail File : Click Here
View Complete Details

Industrial Electrical Contractor

ICC is a reputed Electrical Contractors offering electrical turnkey projects, maintenance contracts, electrical contract services for the industrial and commercial sectors in India. We are a Pune based company having a wide clientele on a pan-India basis. Our success among stiff competition is a result of a robust infrastructure, which in turn is managed by a team of expert professionals. Understanding the ever-changing dynamics of the market, our objective is to change the face of electrical installations and support our client with the best quality and professional service. We ensure that clients always have an up-to-date system functioning through our services that are rendered at the best rates in the industry.

Owing to vast technical expertise, we have been doing time bounded project & maintenance works in sugar factories, cement factories, power plants, chemical and other process industries, infrastructure projects, high-rise commercial buildings etc. Our experienced team has been playing a pivotal role in achieving the new heights of success. We have recruited the best talents in the organizations, who are well versed with every aspect of rendering effective services. All their industrious efforts lead to provide utmost level of satisfaction to the clients.

We are backed by high technology equipment and tools that assist us in executing the projects effectively.


Why Us?

  • Rich industry experience
  • Team of well qualified experts
  • Timely completion
  • Totally client centric approach
  • Economical rates
View Complete Details

PIR Motion Sensor (Model : SM02)

PIR Motion Sensor (Model : SM02)  are energy saving devices used for home energy saving and industrial energy saving. This infrared motion sensor switch detects movement like human movement, opening of a door, movement of a car in a car parking area and keeps the lights, fans etc ON. IT turns OFF the appliances when its detection area is vacant, saving a considerable amount of energy.

Features

  • Very attractive shape & compact size, White ABS plastic body,
  • Good quality sensor element (dual sensor element) Top quality Fresnel lens,
  • Semi conductor re-settable fuse,
  • Short circuit and supply surge protection, Zero cross switching,
  • Ceiling / wall mounting option - Can be erected on ceiling or wall,
  • Detection range : 360degree x 8 mtrs
  • ON time adjustable from 70 seconds to 20 min,
  • Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level.
  • Detection area adjustable from low to high
  • 24 months warrenty.


Specifications

  • Supply voltage : 230 volts +/- 10%age
  • Safe Load : 500watts
  • Detectable motion speed : 0.5 to 1.5 mtr/sec

Brochure


Download Detail File : Click Here
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • D. Sathya Babu (Industrial Consultant Corporate)
  • Survey No: 7/3, Flat No: 14, Building No: 15, Rakshak Nagar Phase-1, Near Zensar, Kharadi, Pune-411 014, Maharashtra. - 411014
  • Share us via
  • Call 08068051317 Ext. 357