Inner Space Mumbai, Maharashtra

Kebao steel cement tile is made out of high grade cold roll steel sheets, available in 600 x 600mm & 610 x 610mm size, in30mm & 35mm thickness. Top & bottom plate joint with 100 spot welding & cavity is filled with light weight cement for solid load baring capacity. It is coated on all sides with epoxy powder coating for long life. Top finish is with high pressure antistaticlaminate or PVC. Four edges are cover with black conductive edge beading for conductivity. These tiles are placed on to the steel understructure pedestal & stringer (rigid grid type) at required height. Finish surface is anti-skit for walking comfort & safety. It is fire rated non-combustible material. Available in Different models to suit low & high weight requirements. The system is fully access able & panels can be change anywhere in any direction. This product is ideal for control room, server room, laboratory’s, HUB rooms, switch room, UPS rooms, etc.  

This system is the modern concept in the flooring for large high-tech open offices for managing different services (data, power & voice cables, fire pipes, under floor A/c systems, etc…). The system consists of steel cement tile, steel pedestals & PVC cap. Panels are made out of cold-roll steel sheets which are punched; spot welded & epoxy powder coating. Inside of panel is filled with formed cement. Holes are made at four corners for locking the tile to the pedestal with screws from top. Anti-vibration caps are placed between the pedestal top tile for walking comfort & low noise. This system can be directly installed on the RCC slabs in new building with the minimum height as low as 100mm to save the space & accommodate all services. Floor covering can be done by carpet or PVC tile. This product is suitable for large open offices

These panels are made out of high density calcium sulphate material bonded with raisins, provides excellent load baring capacity & very high fire resistance. The calcium sulphate core panels is finished with antistatic laminate or PVC on top & bottom covered with 0.5mm G. I. sheets, four sides covered with conductive black PVC stripes. The self load of the system is high compare to wood & steel floors. Calcium sulphate access floor systems are ideally used in the area where the fire requirement stringent such as oil refineries, gas stations, offshore platforms, etc…  

This is an advance access floor system to manage the different cables running through out the office in a systematic way as per the workstation design. The thick steel trays with the top cover of size 100mm or 150mm wide are installed between the access floor panels on to the pedestal.   All service cables such as voice data power are run systematically through this tray. Isolation of power & data is possible by putting two rows at a distance. Installation and maintenance can be done by opening the flap from top without opening the access floor panel. Conventional way of cable trenching & junction boxes can be avoided by using this system in less cost & time. Panels & trays are fixed on aluminum die cast pedestal, low lock type with anti-vibration cap between the tile & pedestal. This system can be directly installed on the RCC slabs in new building with the minimum height as low as 100mm to save the space. Top finishing can be done by carpet or PVC tiles. All other technical features are as per the corner lock system. This product is suitable for large open offices.

• TypeBathroom Towel Rail
• MaterialBrass, Stainless Steel
• ApplicationBathroom Fittings
• Thickness0-5mm, 10-15mm, 15-20mm, 20-25mm, 25-30mm
• ColorGolden, Silver
• AppearanceCommon, Contemporary
• FinishingNon Polished, Polished
• InstallationWall Mounted
• FeatureCorrosion Proof, Easy To Fit, Fine Finished, High Quality

This system is the modern concept in the flooring for large high-tech open offices for managing different services (data, power & voice cables, fire pipes, under floor Ac systems, etc…). The system consists of steel cement tile, steel pedestals & PVC cap. Panels are made out of cold-roll steel sheets which are punched; spot welded & epoxy powder coating. Inside of panel is filled with formed cement. Holes are made at four corners for locking the tile to the pedestal with screws from top. Anti-vibration caps are placed between the pedestal top tile for walking comfort & low noise. This system can be directly installed on the RCC slabs in new building with the minimum height as low as 100mm to save the space & accommodate all services. Floor covering can be done by carpet or PVC tile. This product is suitable for large open offices.