• Number of axes 1, 2, 3

• Radius / Diameter conversion

• Inch / mm conversion

• INC / ABS

• Zero reset

• Preset

• Dimension define

• Machine referencing

• Homing

• Bolt hole calculation (100 Holes)

• Non-volatile memory backup

• Power saving mode

• Linear machine error compensation

• Programming blocks(100)

• Direction select

• Selectable resolution

• 0.1 / 0.01 / 0.005 / 0.001 mm

• 0 to 9 Keys key board

• Halving function

• Approach zero warning

• All features of Pearl-V2 series

• 2/3/4 axes configuration

• Any axis can be can be configured as linear/angular axis

• High counting frequency up to 15 MHZ

• Multi datums-total 6 datums

• Preset

• Settable refresh time

• Up to 1000 points of circle/Arc/Straight Line/Inclined linear/Frames/Matrix pattern

• Mirroring / Scaling

• Linear error compensation

• Nonlinear error compensation of 200 points each axis

• Angular error compensation also possible

• Angular PCD of 100 points

• Settable encoder resolution

• 0.1/0.01/0.05/0.005/0.001/0.0005/0.0001 mm selectable display resolution/

• Measuring range from -99999.999 to 99999.999 mm

Pearl V3_ Instru

• Constant surface speed Output

• Taper turning

• Taper calculation

• Tool offset-no of tools-20

• Job clock/feed rate display

• Programming blocks (2000 Points)

• Direct loading of DXF file using the software

• Axes summing / vectoring

• Polar coordinates

• Backlash compensation

• Skew

• Serial RS232 interface

• Programmable six relay output-pulse/level type

• Touch probe interfacing

• Infrared remote keyboard

• XY, YZ, XZ interpolation

• Remote console-wireless or wired

• 32 bit real time up / down counter

• Count range from 0 to 4294967295

• Very high speed measures up to 12.5 Mhz input frequency

• Two encoders can be interfaced with EUI-02

• Following facility available through USB input

• Reset , Preset, Reset on index pulse

• USB 2.0 compliant

• No need of external power supply. Connections directly to a computer's USB port

• Quadrature X4 differential 5V TTL input

• Easy to use with window's driver & demo software in VB.net

• Ideal for Data acquisition, PC based control applications

• Selectable interpolation factor 1, 2, 5, 10

• Accepts 11 a or 1 VPP signals

• Maximum input frequency 250 khz

• Maximum output frequency 10 mhz

• Extremely small from factor

• RS422 line driver output

• Fully synchronous operation

• +5V operation

• LS-01 converter for half bridge LVDT probe to analog output

• Din rail mounted

• 24V external power supply required

• Gives +/- 10v output for half bridge LVDT probes

• LS-02 convertor which gives +/- 10 V output for half bridge LVDT probes

• 20V external power supply required

• Plug & play USB LVDT signal conditioner

• USB 2.0 compliant

• Easy to use with windows driver & demo software in VB.net / SDK available

• No need of external power supply. connects directly to computer's USB port

• Excitation frequency 20HZ to 20 Khz (factory settable)

• ADC resolution - 16 bit

• Sampling frequency 167 samples per second

• Compatible to peterhirt, Tesa, Marposs, Mhar inductive probe

• Resolution - 1m, 0.1m or customized (factory programmed)

• Used for gauging, data acquisation, positioning measurement, PC based control applications, hobby projects etc

• Measuring strokes - 500/1000/1500/2500/3000/3500/4000 mm

• Resolution - 0.0001 mm (0.1m)

• Accuracy +/- (2+L (in mm) / 300) m

• Machine bed - granite

• Operating temperature - 10 to 45C

• Thermally compensated

• Calibration Process - laser calibration shall be provided

• Highest precision
• Easy handling
• Shapely design
• Two variations indicator / camera

• Video edge detection

• Profile scanning

• SPC analysis

• Part view with dimensions

• Touch probe

• Magnification 30X200X

• Easy reporting the entire report can be duplicated as an excel workbook

• Led lighting Automated software controlled white LED lighting

• Additional system features

• Fully dimensioned part view

• CAD import / export

• Profile scanning and best fit to CAD master

• SPC batch information including control charts

• Output to exce

• All the functions of IAP-V3

• Color graphical LCD display 5.7' diagonal Size

• User friendly GUI

• 2 / 3 / 4 axis configuration

• Sleek design

• Built in 2D CMM features-check the job on same machine after work is over

• Part tolerance

• Online 2D drawing plotting on LCD display

• • 1:1 scale 2D drawing export to pc in DXF format
  • Touch Probe interface
  • IR Remote Keyboard
  • Foot-switch input
  • Support complex circle / arc / line / frames / matrix hole patterns / programmable XY coordinates / mirroring / scaling.
  • 10000 points storage memory for RUN mode
  • Non linear error correction

• Xtreme+Radial series of DRO's are state of art DRO's with color Graphical LCD display specially designed to work with radial drill machine.

• All the functions of Xtreme + Mill

• Specially designed for radial drill machine

• Converts RQ axes displacement of radial drill machine into XY coordinates

• Color graphical LCD display 5.7' diagonal size

• User friendly GUI

• 2/3/4 axis configuration

• Built in 2D CMM features-check the job on same machine after work is over

• Part tolerance

• Online 2D drawing plotting on LCD display

• 1:1 scale 2D drawing export to PC in DXF format

• Touch probe interface

• IR remote keyboard

• Foot-switch input

• Support complex circle / arc / line / frames / matrix hole patterns / mirroring / scaling.

• Direct loading of DXF file using the software

• 10000 points storage memory for RUN mode

• Non linear error correction

• Number of axes 1, 2, 3

• Radius / Diameter conversion

• Inch / mm conversion

• INC / ABS

• Zero reset

• Preset

• Dimension define

• Machine referencing

• Homing

• Bolt hole calculation (100 Holes)

• Non-volatile memory backup

• Power saving mode

• Linear machine error compensation

• Programming blocks(100)

• Direction select

• Selectable resolution

• 0.1 / 0.01 / 0.005 / 0.001 mm

• 0 to 9 Keys key board

• Halving function

• Approach zero warning

• All features of Pearl-V2 series

• 2/3/4 axes configuration

• Any axis can be can be configured as linear/angular axis

• High counting frequency up to 15 MHZ

• Multi datums-total 6 datums

• Preset

• Settable refresh time

• Up to 1000 points of circle/Arc/Straight Line/Inclined linear/Frames/Matrix pattern

• Mirroring / Scaling

• Linear error compensation

• Nonlinear error compensation of 200 points each axis

• Angular error compensation also possible

• Angular PCD of 100 points

• Settable encoder resolution

• 0.1/0.01/0.05/0.005/0.001/0.0005/0.0001 mm selectable display resolution/

• Measuring range from -99999.999 to 99999.999 mm

Pearl V3_ Instru

• Constant surface speed Output

• Taper turning

• Taper calculation

• Tool offset-no of tools-20

• Job clock/feed rate display

• Programming blocks (2000 Points)

• Direct loading of DXF file using the software

• Axes summing / vectoring

• Polar coordinates

• Backlash compensation

• Skew

• Serial RS232 interface

• Programmable six relay output-pulse/level type

• Touch probe interfacing

• Infrared remote keyboard

• XY, YZ, XZ interpolation

• Remote console-wireless or wired

• 32 bit real time up / down counter

• Count range from 0 to 4294967295

• Very high speed measures up to 12.5 Mhz input frequency

• Two encoders can be interfaced with EUI-02

• Following facility available through USB input

• Reset , Preset, Reset on index pulse

• USB 2.0 compliant

• No need of external power supply. Connections directly to a computer's USB port

• Quadrature X4 differential 5V TTL input

• Easy to use with window's driver & demo software in VB.net

• Ideal for Data acquisition, PC based control applications

• Selectable interpolation factor 1, 2, 5, 10

• Accepts 11 a or 1 VPP signals

• Maximum input frequency 250 khz

• Maximum output frequency 10 mhz

• Extremely small from factor

• RS422 line driver output

• Fully synchronous operation

• +5V operation

• LS-01 converter for half bridge LVDT probe to analog output

• Din rail mounted

• 24V external power supply required

• Gives +/- 10v output for half bridge LVDT probes

• LS-02 convertor which gives +/- 10 V output for half bridge LVDT probes

• 20V external power supply required

• Plug & play USB LVDT signal conditioner

• USB 2.0 compliant

• Easy to use with windows driver & demo software in VB.net / SDK available

• No need of external power supply. connects directly to computer's USB port

• Excitation frequency 20HZ to 20 Khz (factory settable)

• ADC resolution - 16 bit

• Sampling frequency 167 samples per second

• Compatible to peterhirt, Tesa, Marposs, Mhar inductive probe

• Resolution - 1m, 0.1m or customized (factory programmed)

• Used for gauging, data acquisation, positioning measurement, PC based control applications, hobby projects etc

• Measuring strokes - 500/1000/1500/2500/3000/3500/4000 mm

• Resolution - 0.0001 mm (0.1m)

• Accuracy +/- (2+L (in mm) / 300) m

• Machine bed - granite

• Operating temperature - 10 to 45C

• Thermally compensated

• Calibration Process - laser calibration shall be provided

• Highest precision
• Easy handling
• Shapely design
• Two variations indicator / camera

• Video edge detection

• Profile scanning

• SPC analysis

• Part view with dimensions

• Touch probe

• Magnification 30X200X

• Easy reporting the entire report can be duplicated as an excel workbook

• Led lighting Automated software controlled white LED lighting

• Additional system features

• Fully dimensioned part view

• CAD import / export

• Profile scanning and best fit to CAD master

• SPC batch information including control charts

• Output to exce

• All the functions of IAP-V3

• Color graphical LCD display 5.7' diagonal Size

• User friendly GUI

• 2 / 3 / 4 axis configuration

• Sleek design

• Built in 2D CMM features-check the job on same machine after work is over

• Part tolerance

• Online 2D drawing plotting on LCD display

• • 1:1 scale 2D drawing export to pc in DXF format
  • Touch Probe interface
  • IR Remote Keyboard
  • Foot-switch input
  • Support complex circle / arc / line / frames / matrix hole patterns / programmable XY coordinates / mirroring / scaling.
  • 10000 points storage memory for RUN mode
  • Non linear error correction

• Xtreme+Radial series of DRO's are state of art DRO's with color Graphical LCD display specially designed to work with radial drill machine.

• All the functions of Xtreme + Mill

• Specially designed for radial drill machine

• Converts RQ axes displacement of radial drill machine into XY coordinates

• Color graphical LCD display 5.7' diagonal size

• User friendly GUI

• 2/3/4 axis configuration

• Built in 2D CMM features-check the job on same machine after work is over

• Part tolerance

• Online 2D drawing plotting on LCD display

• 1:1 scale 2D drawing export to PC in DXF format

• Touch probe interface

• IR remote keyboard

• Foot-switch input

• Support complex circle / arc / line / frames / matrix hole patterns / mirroring / scaling.

• Direct loading of DXF file using the software

• 10000 points storage memory for RUN mode

• Non linear error correction