Secunderabad, Telangana, India
GST : 36AGRPJ2053M1Z0
Verified
Add Review
Our Product / Services
10 Ton Capacity Push-Pullers, 2 and 3-jaw pullers and specialty pullers in a lockable, rugged storage cabinet
10 ton capacity Strong Box puller set
Heres a set of pullers that gives you almost unheard of versatility. This rugged, lockable metal storage cabinet contains pullers, attachments and extra puller jaws good for a variety of applications. Cabinet may be mounted on a wall, stand, or workbench.
IPS10B – Set Contents
| ORDER NUMBER | DESCRIPTION |
|---|---|
| 927 | 10 Ton Push-Puller® with 172 mm legs |
| 1027 | 2/3 Jaw Puller Manual 5 Ton |
| 1037 | 2/3 Jaw Puller Manual 7 Ton |
| 1101 | 15.75″ Legs Push/Puller 10 Ton |
| 1122 | Bearing Pulling Attachment 17.5 Ton |
| 1123 | Bearing Pulling Attachment 17.5 Ton |
| 1152 | Internal Pulling Attachment 101,6 mm Reach |
| 7393 | Gear and Pulley Puller 139,7 mm |
| 8005 | Puller Threaded Adapter 5/8″ – 18 F x 3/8″ – 16 M (2), 57,2 mm length |
| 8006 | Puller Threaded Adapter 5/8″ – 18 F x 1/2″ – 20 M (2), 57,2 mm length |
| 8007 | Puller Threaded Adapter 5/8″ – 18 F x 1/2″ – 13 M (2), 57,2 mm length |
| 8010 | Puller Threaded Adapter 5/8″ – 18 F x 5/8″ – 11 M (2), 57,2 mm length |
| 8013 | Puller Threaded Adapter 5/8″ – 18 F x 3/4″ – 16 M (2), 57,2 mm length |
| 8015 | Puller Threaded Adapter 5/8″ – 18 F x 3/4″ – 10 M (2), 57,2 mm length |
| 8019 | Puller Threaded Adapter 5/8″ – 18 F x 1″ – 14 M (2), 57,2 mm length |
| 8035 | Puller Threaded Adapter 1/2″ – 20 F x 5/8″ – 18 F (1) |
| 8037 | Puller Threaded Adapter 5/8″ – 18 F x 5/8″ – 16 F (1) |
| 8038 | Puller Threaded Adapter 5/8″ – 18 F x 3/4″ – 16 F (1) |
| 8039 | Puller Threaded Adapter 5/8″ – 18 F x 7/8″ – 14 F (1) |
| 8040 | Puller Threaded Adapter 5/8″ – 18 F x 1″ – 14 F (1) |
| 8050 | Puller Shaft Protector 38,1 mm x 19,1 mm |
| 8051 | Puller Shaft Protector 31,8 mm x 19,1 mm |
| 8052 | Puller Shaft Protector 25,4 mm x 19,1 mm |
| 8053 | Puller Shaft Protector 19,1 mm x 19,1 mm |
| 8057 | Puller Step Plate Adapter 25,4 mm x 19,1 mm |
| 8058 | Puller Step Plate Adapter 28,4 mm x 22,1 mm |
| 8059 | Puller Step Plate Adapter 31,8 mm x 25,4 mm |
| 8060 | Puller Step Plate Adapter 34,8 mm x 28,4 mm |
| 8061 | Puller Step Plate Adapter 41,1 mm x 31,8 mm |
| 8062 | Puller Step Plate Adapter 44,5 mm x 34,8 mm |
| 43892 | Long jaws for 1037 (3) |
| 212867 | Cabinet, Tool Board and Adapter Board |
10 Ton Capacity Hydraulic/Manual Puller Set in Strong Box
This lockable metal Strong Box contains both hydraulic and manual pullers, plus attachments. The rugged storage cabinet keeps the tools organized and secure from unauthorized borrowers!
IPS10HB Set Contents
IDEAL FOR PULLING AND PRESSING.
ASME B30.1 10, 000 PSI/ 700 BAR
Note: Each cylinder complete with threaded cylinder heat insert, cylinder half coupler and cylinder attaching screws.
** The RT1004 has a bypass when full stroke is reached, preventing over-pressurization of the cylinder.
| ORDER NUMBER |
CYLINDER CAPACITY (TONS) |
STROKE (MM.) |
OIL CAPACITY (CU. CM.) |
MOUNTING HOLE (MM.) |
CYLINDER EFFECTIVE AREA (SQ. CM.) |
METRIC TONSAT 700 BAR |
WEIGHT (KG) |
|
|---|---|---|---|---|---|---|---|---|
| PUSH | PUSH | RETURN | ||||||
| RT172 | 17,5 | 50,8 | 116 | – | 8,7 | 22,8 | 16,1 | 6,6 |
| RT302 | 30 | 63,5 | 258 | – | 11,9 | 40,5 | 28,5 | 12,8 |
| RT503 | 50 | 76,2 | 482 | – | 16,7 | 63,3 | 44,5 | 25,4 |
| RT1004** | 100 | 123,8 | 1.583 | 1.037 | 19,8 | 124,1 * | 87,3 | 72,6 |
| Note: Each cylinder complete with threaded cylinder heat insert, cylinder half coupler and cylinder attaching screws. ** The RT1004 has a bypass when full stroke is reached, preventing over-pressurization of the cylinder. |
||||||||
Contains three popular Power Team bar-type pullers. Ideal for servicing off-road construction equipments and machinery
10 ton capacity Bi-Directional Puller set
Contains three popular Power Team bar-type pullers in one versatile set, packed in a handy plastic storage case. Tools included permit damage-free pulling of gears, bearings, harmonic balancers, and other parts having tapped holes. Ideal for servicing off-road construction equipment and machinery.
Set Contents
Order NumberDescription92710 Ton Bi-Directional; 213 mm reach, 54 to 184 mm spread. Comes with 171 mm puller legs, other leg sizes are available separately522Gear and pulley puller; spread range when used with 12, 7 mm cap screws: 50, 8 to 197 mm. Cap screws not included.7393Gear and pulley puller with standard 140 mm forcing screw, plus special 330 mm forcing screw. Includes two hex head cap screws, 3/8 -16 x 76, 2 mm long. Spread range: 38 to 180 mm.
Single-Acting, Spring return. Positive mechanical lock to support load.
POSITIVE MECHANICAL LOCK TO SUPPORT LOAD.
ASME B30.1 10, 000 PSI/ 700 BAR
| ORDER NUMBER |
CYLINDER CAPACITY (TONS) |
STROKE (MM.) |
OIL CAPACITY (CU. CM.) |
BORE DIAMETER (MM.) |
CYLINDER EFFECTIVE AREA (SQ. IN.) |
METRIC TONS AT 700 BAR |
WEIGHT (KG.) |
|---|---|---|---|---|---|---|---|
| RA556L | 55 | 155,5 | 1.109 | 95,3 | 71,2 | 50,1 | 13,4 |
| RA1006L | 100 | 158,8 | 2.116 | 130,2 | 133,0 | 93,5 | 29,1 |
| Note: Supported loads not to exceed the rated capacity of the cylinders. Not intended to support additional dynamic loads, such as those applied by moving vehicles. |
|||||||
Lock-on, jaw-type puller set
Components can be assembled to create several versatile puller versions. The puller head is turned to securely lock the jaws onto the part being removed. Both a 2-way and 3-way puller head are included, plus three long-reach and three short-reach puller jaws in a plastic storage box. Easily removes gears, bearings and other press-fitted parts.
| CONTENTS ORDER NUMBER |
2-JAW | 3-JAW SPREAD | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| INSIDE * | OUTSIDE | INSIDE * | OUTSIDE | |||||||||||
| MINIMUM (MM) |
MAXIMUM (MM) |
MINIMUM (MM) |
MAXIMUM (MM) |
MINIMUM (MM) |
MAXIMUM (MM) |
MINIMUM (MM) |
MAXIMUM (MM) |
|||||||
| 44195 | 38 | 114 | 19 | 127 | 38,1 | 121 | 25,4 | 114 | ||||||
| 44148 | 70 | 140 | 19 | 191 | 83 | 159 | 25,4 | 159 | ||||||
| * Can be used for internal pulling tasks when used with a slide hammer.
|
||||||||||||||
CAUTION: DESIGNED FOR CRIMPING APPLICATION ONLY!
This system should not be used for lifting.
EXTREMELY DURABLE YET LIGHTWEIGHT AND OPERATE UNDER LOW-LINE VOLTAGE CONDITIONS.
PE-NUT PUMP 115V
CAUTION: DESIGNED FOR CRIMPING APPLICATION ONLY!
This system should not be used for lifting.
| ORDER NUMBER |
OIL DELIVERY (L/PER MIN.) |
OIL RESERVOIR (L) |
USABLE OIL (L) |
WEIGHT (KG) |
|---|---|---|---|---|
| PE-NUT | 2,62 at 7 bar | 6 | 2,8 | 12,6 |
| PE-NUTC* | 0,49 at 700 bar | |||
| * | ||||
| ELECTRICAL DATA | |
|---|---|
| ELECTRIC MOTOR | ELECTRIC CONTROL |
| 0,46 kW, 10,000 rpm 115V AC, 50 Hz 11 amp current draw (115V at 700 bar) |
Remote control with 3,1 meter cord |
| * | |
We are one of the most significant exporters and suppliers of Hydraulic Grip Puller Set in Telangana region. This set of equipment has precise hydraulic control which permits fast, proficient and safe pulling. Its high quality forged steel components provide higher reliability and service. Produced in four major capacities of 8, 20, 30 and 50 tons, this set includes Hydraulic hand pump, saddle, hose, gauge and gauge adaptor.
Specifications
|
Model |
AY-BHP-162 |
AY-BHP-251G |
AY-BHP-351 G |
AY-BHP-551G |
|
|---|---|---|---|---|---|
|
Capacity |
8 Tons |
20 Tons |
30 Tons |
50 Tons |
|
|
Include Hydraulics |
|||||
|
Hand Pump |
AY-EP-142 |
AY-EP-392 |
AY-EP-392 |
AY-EP-80 |
|
|
AY Cylinder |
AY-RCH-121 |
AY-RCH-202 |
AY-RCH-302 |
AY-RCH-603 |
|
|
Sadle |
/ |
AY-HP-2015 |
AY-HP-3015 |
AY-HP-5016 |
|
|
Hose |
AY-HC-7206 |
AY-HC-7206 |
AY-HC-7206 |
AY-HC-7206 |
|
|
Gauge |
AY-GF-120B |
AY-GF-813B |
AY-GF-813B |
AY-GF-813B |
|
|
Gaugeadaptor |
AY-GA-4 |
AY-GA-3 |
AY-GA-3 |
AY-GA-3 |
|
|
Model |
AY-BHP-1762 |
AY-BHP-252 |
AY-BHP-352 |
AY-BHP-552 |
|
|
Max Spread(mm) |
2-jaw |
250 |
400 |
594 |
900 |
|
3-jaw |
250 |
500 |
800 |
1100 |
|
|
Max Reach (mm) |
2-jaw |
252 |
300 |
387 |
700 |
|
3-jaw |
252 |
300 |
387 |
700 |
|
|
Jaw (mm) |
Thickness |
15 |
20 |
25 |
30 |
|
Width |
24 |
28 |
38 |
40 |
|
|
Adjusting Screw (mm) |
Thread |
3/4 11 – 16 UNF |
1 11 – 8 UNC |
1 1/4 11 – 7 UNC |
1 5/8 11 – 5, 5 UNC |
|
Length |
400 |
675 |
795 |
975 |
|
Punching capacity
Max. Thickness :
Steel Plate : 10 mm
Copper Plate : 20 mm
Aluminum Plate : 20 mm
Max. Diameter : 20.5 mm
20.5 mm diameter hole with 10 mm thick mild steel.
For angle iron, plates, beams and bus bars.
Specifications :
Throat Depth : 70 mm
Max. Pressure : 700 bar
Oil Required : 116 cc
Max. Output : 31 tons / 305 kN
Punching capacity
Max. Thickness :
Steel Plate : 10 mm
Copper Plate : 20 mm
Aluminum Plate : 20 mm
Max. Diameter : 20.5 mm
20.5 mm diameter hole with 10 mm thick mild steel.
For angle iron, plates, beams and bus bars.
Features :
C-Head made by forging for greater strength.
Convenient handle for easy carrying.
Base stand for easy positioning and accurate punching.
Single action piston / cylinder arrangement reduces iron chippings.
Punch and die changeover tools included.
Operated by any hydraulic pump with rated oil pressure of 700 bar (10, 000 psi).
Efficient and safe to use.
Accessories :
Round Punching Dies for mild steel (10.5, 13.5, 17.5, 20.5 mm)
Hand Pin, 4 mm T-type Wrench
Open throat design makes loading and unloading of work easy.
| C-FRAME STANDARD | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| ORDER NUMBER |
CAPACITY (TONS) |
TYPE OF CYLINDER USED |
STROKE (MM) |
CYLINDER MODEL |
SPEED (MM./STROKE)** |
TYPE PUMP |
PUMP MODEL |
WEIGHT (KG) |
|
| ADVANCE | PRESSING | ||||||||
| SPM256C* | 25 | Single-Acting | 159 | C256C | 3,3 | 0,8 | Hand | P59 | 108 |
| SPX256C* | 25 | Single-Acting | 159 | C256C | 3,3 | 0,8 | ___ | ___ | 108 |
| * SPM256C does not include No. 60846 pedestal base. ** Typical performance based on pump specifications. Actual speeds may vary with operating conditions. | |||||||||
| ORDER NUMBER |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|
| 60846 | Pedestal Base – Provides a stable base for SPM256C. Includes a bracket for mounting the pump on the side of pedestal press. | 34,5 |
12 to 55 cu. in. (197-738 cu cm) Reservoir. Single-Speed, Single-Acting
BEST SUITED FOR APPLICATIONS WHERE THERE IS LITTLE OR NO FREE TRAVEL.
Power Team hand pumps, with the angled fill port, have a built in relief valve protection system. This system is designed to protect over-pressurization of the reservoir from sudden back pressure. This system also works as a seal to prevent oil leaks
| DER NUMBER |
FOR USE WITH | SPEED | VOLUME PER STROKE (CU. CM) |
MAXIMUM PRESSURE (BAR) |
HANDLE EFFORT (KG) |
RESERVOIR | OIL PORT (IN) |
WEIGHT (KG) |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|
| LP | HP | LP | HP | OIL CAPACITY (CU. CM) |
USABLE OIL CAPACITY (CU. CM) |
||||||
| P12 | Single Acting Cylinders* |
1 | — | 1,1 | — | 700 | 34 | 197 | 148 | 3/8 NPTF | 2,6 |
| P23 | 1 | — | 2,6 | — | 210 | 32 | 390 | 333 | 3/8 NPTF | 5,5 | |
| P55 | 1 | — | 2,6 | — | 700 | 66 | 902 | 738 | 3/8 NPTF | 7,2 | |
| * Pump includes 2-Way Valve LP = Low Pressure HP = High Pressure |
|||||||||||
PT-1802F
High impact force: 3, 000 ipm
High Torque: 150 N.m
1/4 Hex Chuck
LED Working Light
Battery Fuel Gauge Indicator
Stepless Variable Speed
Quick-Charging &Long-Lasting Battery Pack
Hanging Design
3 3/4 digits 3999 counts.
Description
| Cladding Diameter |
Fiber Count Coating Diameter |
Cleave length |
Dimensions | Cleaver Blade (5FB-1688-BLADE) |
Individual packing |
| 125 μm | Single fiber 250μm & 900μm |
5-20 mm | 62x60x56 mm |
16 cutting points Material: Tungsten steel |
Color box |
Ideal for measuring of mechanical, chemical, pottery, food, metallurgy, electric power, air condition, high-temperature heat treatment.
MT-4612 Infrared Thermometer
deal for measuring of mechanical, chemical, pottery, food, metallurgy, electric power, air condition, high-temperature heat treatment.
Dual laser
for accurately aiming with fast (500 ms) response time
-50 to 580C (-58F 1076F)
Temperature range
0.10 to 1.00 emissivity adjustable
for accurately measuring different surface types
Distance spot Ratio 16:1
measures smaller surface areas at greater distances
Resolution: 0.1C/0.1F
Ergonomic & rugged
Extra functions:
unit selection, Backlight, Auto power off, Low battery indication, Data hold, Max./Min.value, Max-Min subtracted value, Average value, High/Low temperature alarm
3 1/2 Digital LCR Multimeter
12pcs Torque screwdriver set 12-bits
| MATERIAL | HRC | APPLICATION | OAL.(MM) | |
|---|---|---|---|---|
| Body | Cutting edge | Copper | ||
| S55C | 43Ëš±3Ëš | 53Ëš±3Ëš | Ø 1.0mm | 125 |
Description
WED Series
Torque Capacity :- 139 to 7999 nm
high performace bolting tool with automatic digital torque
Hydraulic Nut Splitter will deliver enough force to split the toughest fused or rusted-on grade 2H nuts.
HYDRAULIC NUT SPLITTERS 15 & 25 TON CAPACITY
Power Team Single Acting load return hydraulic cylinder, tonnages ranging from 55 200
Patented swivel cap provides concentrated load centering up to 5 degrees
Sealing technology provides rod lubrication to reduce friction and wear
Optimized piston gland design resists side loading conditions
Robust retaining ring withstands full load end stop and conforms with ANSI B30.1 standards
Power-Tech+ nitro-carburization surface treatment inhibits corrosion and provides exceptional durability
Base mounting holes standard on all models (they are not maintained to port location)
One high flow 3/8 NPTF female half coupler and carry strap w/ eyelets are included
WHEN PRESSURE HAVE BEEN SETTED, PRESSURE GAUGE CONTROL AUTOCYCLE INSTEAD OF PRESSURE REGULATOR, LESS WEAR, LONG LIFE
-PROGRAM CONTROL AUTO-CYCLE, MORE QUICKLY
-HIGH SPEED AND EFFICIENCY, IMPROVING EFFICIENCY BY 50% OR MORE THAN MANUAL OPERATED PUMP
-AUTO-CYCLE OPERATION, COMPLETE BOLT TIGHTENING AND LOOSING JOB ONLY NEED TO PRESS THE AUTO BUTTON
-POWERFUL ELECTRIC MOTOR, BRUSHLESS, FREE MAINTENANCE, LONG LIFE
-POWERFUL RADIATOR CAN AUTO RUN WHEN OIL TEMPERATURE UP TO 35C, SUITABLE FOR CONTINUOUS OPERATION
-MANUAL OR AUTO-CYCLE MODEL CAN BE SHIFTED BY NEEDS, CONVENIENT FOR OPERATION
-RUNS UP TO 4 HYDRAULIC TORQUE WRENCHES SIMULTANEOUSLY BY MULTIPORT MANIFOLD
| Model | Reservoir
(L) |
Motor Specifications(KW) |
Power source |
Flow Rate (L/min) |
Operating pressure
(MPa) |
Size
(mm) |
Remote Control Line (Standard,m) |
Weight (kg) |
| AE8042K | 7.6 | 1.1 | 220V/50HZ | 8.0@0-6.5MPa 1.8@6.5-32MPa 0.85@32-70MPa |
70 | 375*300*410 | 6 | 25 |
Power and performance The qualities of a champion
Heavy-duty gauges are easy to read and highly visible with a red Day-glo needle.
Heavy-duty gauges are easy to read and highly visible with a red Day-glo needle.
| ORDER NUMBER |
FACE DIAMETER (MM) |
PSI / BAR | TONS | MAJOR GRADUATIONS |
MINOR GRADUATIONS |
SILCONE FILLED |
USE WITH CYLINDER SERIES |
|---|---|---|---|---|---|---|---|
| 9040E | 63,5 | 0-10,000 / .0-690 | – | 2500 psi, 100 Bar | 500 psi, 20 Bar | Yes | All |
| 9041 | 63,5 | 0-10,000 / .0-690 | – | 2500 psi, 100 Bar | 500 psi, 20 Bar | No | All |
| 9051 | 100 | 0-10,000 / .0-690 | – | 1000 psi, 100 Bar | 200 psi, 10 Bar | No* | All |
| 9052E | 100 | 0-10,000 / .0-690 | – | 1000 psi, 100 Bar | 200 psi, 10 Bar | Yes | All |
| 9059E | 100 | 0-10,000 / .0-690 | 0-17.5, 0-30 and 0-50 |
2000 psi, 5 Ton | 200 psi, .5 Ton on 30, 50 Ton Scales; .2 Ton on 17.5 Ton Scale |
No* | RT172, RT302, RT503 |
| 9053E | 100 | 0-10,000 / .0-690 | 0-5 | 2000 psi, 1 Ton | 200 psi, .1 Ton | No | C & RLS |
| 9055E | 100 | 0-10,000 / .0-690 | 0-10 | 2000 psi, 1 Ton | 200 psi, .1 Ton | No* | C, RD, RH, RLS & RSS |
| 9063E | 100 | 0-10,000 / .0-690 | 0-25 | 2000 psi, 5 Ton | 200 psi, .5 Ton | No* | C & RD |
| 9065E | 100 | 0-10,000 / .0-690 | 0-30 | 2000 psi, 5 Ton | 200 psi, .5 Ton | No* | RH†, RLS & RSS |
| 9067E | 100 | 0-10,000 / .0-690 | 0-50 | 2000 psi, 5 Ton | 200 psi, .5 Ton | No* | RH†, RLS & RSS |
| 9069E | 100 | 0-10,000 / .0-690 | 0-55 | 2000 psi, 5 Ton | 200 psi, .5 Ton | No* | C, R, RA & RD |
| 9071E | 100 | 0-10,000 / .0-690 | 0-60 | 2000 psi, 5 Ton | 200 psi, 1 Ton | No* | RH |
| 9075E | 100 | 0-10,000 / .0-690 | 0-100 | 2000 psi, 10 Ton | 200 psi, 1 Ton | No* | C, R, RA, RD, RH, RLS†, RSS† & RT1004† |
| 9077E | 100 | 0-10,000 / .0-690 | 0-150 | 2000 psi, Initial 10 Then 20 Ton |
200 psi, 2 Ton | No* | C, R, RD & RLS |
| 9079E | 100 | 0-10,000 / .0-690 | 0-200 | 2000 psi, 20 Ton 10 Then 20 Ton |
200 psi, 2 Ton | No* | R, RD & RH† |
| 9089 | 150 | 0-10,000 / .0-690 | 0-690 | 1000 psi, 100 Bar | 100 psi, 10 Bar | No* | All |
| * Shipped “dry.” User can convert to “wet” using liquid silicone Order Number 9046. † The tonnage scale on the gauge may vary slightly among different series cylinders due to different effective area. |
|||||||
FOR MAINTENANCE AND CONSTRUCTION APPLICATIONS.
| Available with 115V, 60 Hz motor (to order, remove suffix 50-220 behind pump order number). ** Advance position holds pressure with motor shut off. Advance position holds pressure with motor shut off. Return position advances cylinder with motor running and returns cylinder with motor shut off. Not to be used for lifting. | NOTE:Usable oil is calculated with the oil fill at the recommended level of 38 mm below reservoir cover plate. NOTE:Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17. Some Power Team pumps are available in special configurations not listed in this catalog. Power Team can Assemble to Order pumps with special seals, voltages, valves, relief valve settings, etc. For your special requirements please consult your local distributor or the Power Team factory. | |||||||
| ORDER NUMBER |
FOR USE WITH CYLINDER TYPE |
DESCRIPTION | VALVE TYPE |
VALVE NUMBER |
VALVE FUNCTION |
CONTROL SWITCH | MOTOR | RESERVOIR USABLE (LITER) |
|---|---|---|---|---|---|---|---|---|
| PE172-50-220 | Single-Acting | Base model pump with 0,37 kW pump with 7,6 liter thermoplastic reservoir. |
2-Way | 9517 | Advance Return (Auto†) |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50/60 Hz, Single Phase |
4,72 |
| PE172M-50-220 | Single-Acting | PE172-50-220, except has 9,5 liter aluminum reservoir. | 2-Way | 9517 | Advance Return (Auto†) |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50/60 Hz, Single Phase |
6 |
| PE172S-50-220 | Single-Acting | PE172-50-220, except has solenoid operated valve. |
3-Way | 9570 | Advance Hold Return |
Remote Motor & Valve (7,6 m) |
0,37 kW, 220V* 50/60 Hz, Single Phase |
4,72 |
| PE172SM-50-220 | Single-Acting | PE172S-50-220, except has aluminum reservoir. |
3-Way | 9570 | Advance Hold Return |
Remote Motor & Valve (7,6 m) |
0,37 kW, 220V* 50/60 Hz, Single Phase |
6 |
| PE172A-50-220∞ | Single-Acting | Best suited for crimping, punching, pressing. Not for lifting. Thermoplastic reservoir. |
Auto./Dump Manifold |
45554 | Advance Return |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50/60 Hz, Single Phase |
4,72 |
| PE172AM-50-220∞ | Single-Acting | PE172A-50-220, except has aluminum reservoir. |
Auto./Dump Manifold |
45554 | Advance Return |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50/60 Hz, Single Phase |
6 |
| PE172-E220 | Single-Acting | 0,37 kW pump with 7,6 liter thermoplastic reservoir. Meets CE requirements |
2-Way | 9517 | Advance Return (Auto†) |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50/60 Hz, Single Phase |
4,72 |
| PE172M-E220 | Single-Acting | PE172-50-220, except has 9,5 liter aluminium reservoir. Meets CE requirements |
2-Way | 9517 | Advance Return (Auto†) |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50/60 Hz, Single Phase |
6 |
| PE172S-E220 | Single-Acting | PE172-50-220, except has solenoid operated valve. Meets CE requirements |
3-Way | 9570 | Advance Hold Return |
Remote Motor & Valve (3,1 m) |
0,37 kW, 220V* 50 Hz, Single Phase |
4,72 |
| PE172SM-E220 | Single-Acting | PE172-50-220, except has aluminium reservoir. Meets CE requirements |
3-Way | 9570 | Advance Hold Return |
Remote Motor & Valve (3,1 m) |
0,37 kW, 220V* 50 Hz, Single Phase |
6 |
| PE172A-E220∞ | Single-Acting | Best suited for crimping, punching, pressing. Not for lifting. Thermoplastic reservoir. Meets CE requirements |
Auto./Dump Manifold |
4554 | Advance Return |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50 Hz, Single Phase |
4,72 |
| PE172AM-E220∞ | Single-Acting | PE172A-50-220, except has aluminum reservoir. Meets CE requirements |
Auto./Dump Manifold |
4554 | Advance Return |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50 Hz, Single Phase |
6 |
| PE174-50-220 | Single/ Double-Acting |
PE172-50-220, except has 9500 double-acting valve. |
4-Way | 9500 | Advance Hold Return** |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50 Hz, Single Phase |
4,72 |
| PE174M-50-220 | Single/ Double-Acting |
PE174-50-220, except has aluminum reservoir. |
4-Way | 9500 | Advance Hold Return** |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50 Hz, Single Phase |
6 |
| PE174-E220 | Single/ Double-Acting |
PE172-50-220, except has 9500 double-acting valve. Meets CE requirements |
4-Way | 9500 | Advance Hold Return** |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50 Hz, Single Phase |
4,72 |
| PE174M-E220 | Single/ Double-Acting |
PE174-50-220, except has aluminium. Meets CE requirements |
4-Way | 9500 | Advance Hold Return** |
Remote Motor Control (3,1 m) on/off |
0,37 kW, 220V* 50 Hz, Single Phase |
6 |
Ideal for small pressing jobs; repairing small motors, armatures, removing and installing gears, bearings, other press-fit parts.
PUMP ELECTRICAL SPECIFICATIONS
PE10 Series 220 volt, 50 cycle, single phase.
Also available in 115 volt, 60 cycle, remove suffix -220 to order number.
| ORDER NUMBER |
FRAME | CAP. (TONS) |
TYPE OF CYLINDER USED |
STROKE (MM) |
CYLINDER MODEL |
SPEED (MM./MIN.)† † † | TYPE PUMP |
PUMP MODEL † |
WEIGHT (KG) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| ADVANCE | PRESSING | |||||||||
| SPM1010 | 222481 Bench | 10 | Single-Acting | 257 | C1010C | 1,5 mm./stroke | Hand | P55 | 41,2 | |
| SPH1010 | 222480 Floor | 10 | Single-Acting | 257 | C1010C | 1,5 mm./stroke | Hand | P55 | 77,5 | |
| SPE1010 | 222480 Floor | 10 | Single-Acting | 257 | C1010C | 55,7 | 5,1 | Electric †† | PE102 | 79,3 |
| SP1010A | 222480 Floor | 10 | Single-Acting | 257 | C1010C | 93,7 | 7,6 | Air | PA9H | 78,1 |
| SPE1010D | 222480 Floor | 10 | Double-Acting | 254 | RD1010 | 55,7 | 5,1 | Electric †† | PE104 | 87,0 |
| † Optional air/hydraulic pumps available on request. †† “Advance” position holds pressure with motor shut off. “Return” position advances cylinder with motor running and returns cylinder with motor shut off. ††† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary with operating conditions. |
||||||||||
BEST SUITED FOR APPLICATIONS WHERE THERE IS LITTLE OR NO FREE TRAVEL.
Power Team hand pumps, with the angled fill port, have a built in relief valve protection system. This system is designed to protect over-pressurization of the reservoir from sudden back pressure. This system also works as a seal to prevent oil leaks.
| ORDER NUMBER |
FOR USE WITH | SPEED | VOLUME PER STROKE (CU. CM) |
MAXIMUM PRESSURE (BAR) |
HANDLE EFFORT (KG) |
RESERVOIR | OIL PORT (IN.) |
WEIGHT (KG) |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|
| LP | HP | LP | HP | OIL CAPACITY (CU. CM) |
USABLE OIL CAPACITY (CU. CM) |
||||||
| P157 | Single-Acting Cylinders* | 2 | 10,7 | 2,6 | 97 | 700 | 64 | 2491 | 2245 | 3/8 NPTF | 11,8 |
| P159 | 2 | 42,6 | 2,6 | 22 | 700 | 64 | 2491 | 2245 | 3/8 NPTF | 11,8 | |
| P300 | 2 | 42,6 | 2,6 | 22 | 700 | 64 | 5.700 | 5081 | 3/8 NPTF | 25,1 | |
| P460 | 2 | 120,5 | 4,6 | 22 | 700 | 41 | 9.500 | 7539 | 3/8 NPTF | 24,9 | |
| P157D | Double-Acting Cylinders** | 2 | 10,7 | 2,6 | 97 | 700 | 64 | 2491 | 2245 | 3/8 NPTF | 13,1 |
| P159D | 2 | 42,6 | 2,6 | 22 | 700 | 64 | 2491 | 2245 | 3/8 NPTF | 12,7 | |
| P300D | 2 | 42,6 | 2,6 | 22 | 700 | 64 | 5.700 | 5081 | 3/8 NPTF | 25,9 | |
| P460D | 2 | 120,5 | 4,6 | 22 | 700 | 41 | 9.500 | 7539 | 3/8 NPTF | 26,3 | |
| * Pump includes 2-Way Valve ** Pump includes 4-Way Valve LP = Low Pressure HP = High Pressure |
|||||||||||
Introducing Hands Free Boltings revolutionary new Safety Valve.
Designed to provide an additional element of safety to the tool operator in controlled bolting operations. The Patent Pending Hands Free Bolting Safety Valve fits in-line between the hydraulic power pack and hydraulic torque tool. Whilst the trigger is activated the tool remains in a live position, once the trigger is released hydraulic power is automatically cut and the tool operator is free to re-locate the tool without concern of accidental tool activation.
The Safety Valve works with all leading hydraulic power packs and torque tools and is supplied complete with whip hose and screw couplers to connect to your tool.
8 bar Air lifting bags set has very low insertion height, it enable you to free injured people quickly and smoothly. Lift even heaviest loads in a single smooth movement. Aolai 8 bar Air lifting bags are very versatile applicable: use them to lift, push, press, prise or split as the situation demands- safely and reliably even on difficult inclines. The optimised surface profile on Aolai air lifting bags masters even slippery surfaces such as grass or sand with no problem. The safety coupling prevents unwanted disengagement of the hose from the lifting bags
Applications:
Free trapped people, Traffic accidents, Rockfalls or landslides, Callapsed buildings
Why choose Air lifting bags?
Thin section insertion height only 2.5cm
Especially strong Several layers of Aramid-reinforced material
Anti-slip surface
Safety coupling
Reflective corner markings and clear & distinctive labels
Guaranteed quality:
Safety factor greater than 4:1
700 bar fittings for proper connection of hydraulic components
please see below in list
| 700 BAR FITTING TYPE |
THREAD | Model Number |
|
|---|---|---|---|
| FROM | TO | ||
| 3/8″ NPTF | 3/8″ NPTF | FZ-1616 | |
| 3/8″ NPTF | 1/4″ NPTF | FZ-1615 | |
| 1/2″ NPTF | 3/8″ NPTF | FZ-1625 | |
| 1/4″ NPTF | 1/4″ NPTF | FZ-1608 | |
| 3/8″ NPTF | 3/8″ NPTF | FZ-1619 | |
| 3/8″ NPTF | 3/8″ NPTF | FZ-1617 | |
| 3/8″ NPTF | 3/8″ NPTF | FZ-1614 | |
| 1/4″ NPTF | 1/4″ NPTF | FZ-1605 | |
| 3/8″ NPTF | 3/8″ NPTF | FZ-1613 | |
| 3/8″ NPTF | 3/8″ NPTF | FZ-1612 | |
| 1/4″ NPTF | 1/4″ NPTF | FZ-1637 | |
| 3/8″ NPTF | 3/8″ NPTF | BFZ-16312 | |
| 3/8″ NPTF | 3/8″ NPTF | FZ-1610 | |
| 1/4″ NPTF | 1/4″ NPTF | FZ-1638 | |
| 3/8″ NPTF | 1/4″ NPTF | FZ-1630 | |
| 1/4″ NPTF | 1/2″ NPTF | BFZ-1630 | |
| 3/8″ NPTF | G 1/4″ | BFZ-16301 | |
| G 1/4″ | 1/4″ NPTF | BFZ-16411 | |
| G 1/4″ | 1/8″ NPTF | BFZ-16421 | |
| G 3/8″ | 1/4″ NPTF | BFZ-16323 | |
| G 3/8″ | 3/8″ NPTF | BFZ-16324 | |
| 1/4″ NPTF | 3/8″ NPTF | FZ-1055 | |
| 1/4″ NPTF | 1/8″ NPTF | FZ-1642 | |
| 1/2″ NPTF | 3/8″ NPTF | FZ-1634 | |
| NUMBER OF OIL PORTS |
OIL PORT CONNECTION NPTF |
LENGTH
MM |
Manifold Model Number |
MAXIMUM PRESSURE BAR |
|---|---|---|---|---|
| 7 | 3/8″ | 178 | AR-64 | 700 |
| 7 | 3/8″ | 369 | AR-65 | 700 |
| 6 | 3/8″ | 58 | AR-66 * | 700 |
Designed for use in all positions.
Identify or trace the HV or LV phases at any point of the electrical distribution networks (substations, lines, LV networks, etc.)
Phase Identifier with Unlimited range BT-HT |
USE : The FC4000 makes it possible to identify or trace the HV or LV phases at any point of the electrical distribution networks (substations, lines, LV networks, etc.) from a central reference. The network remains in its normal operating scheme and energized. The FC4000 can prepare accurately and in real time all operations requiring perfect knowledge of the phases: Preparation work setting up recharge, setting service processors. |
| CHARACTERISTICS : The reference unit Placed permanently in a position, it is accessible by conventional telephone CPR. It includes: A tag containing the antenna and GPS receiver for accurate timing measurements. A housing containing the measurement and communication electronics.On the back side is all the connections. This housing can be attached to a relay board or integrated into a 19 4U rack.On the front panel are all function, power, GPS synchronization indicators, presence of reference voltage 1 and 2 and telephone line socket.The mobile unit: It consists of a bag repeater containing all communication and measuring elements. The GPS mobile tag (precise synchronization of measurements). The mobile phone (communication with the reference). Intelligent Sensor Once on, all the functions are automatic and without interpretation. It displays the phase index. It automatically recognizes the following situations: direct voltage phase / earth of the LV network, the resulting tensions capacitive dividers HTA cells. The signals coming from the sensor for the bare networks HT. Usable on open stations and aerial HTA networks, it is autonomous and works only on contact. Reference Unit: voltage references from 50 to 250 Vrms. Power consumption to 1 500 measurements. Sensor for bare MV networks: operating voltages phase / earth 2.5 to 30 kV. infrared communication distance max. 20 m, beam diameter at 6 m: 1 m; Contact measurement. Automatic start-up by presence of voltage. automatic cut-off when the voltage is removed. internal power supply by battery 9V autonomy> to 1 500 measurements. fixation by standard notched tip. |
| MORE PRODUCT: Profit for the phase identification with a central reference: better planning of distribution networks and better economic management of their developments. Reduction or postponement of investments (eg HV / LV transformers overloaded prematurely due to poor distribution of single-phase loads). A reduction in the operating and intervention costs: planned and knowingly implemented intervention, for example additional work durations caused by the lack of prior knowledge of existing indices in an installation. Reduction of customer recharge times (connection of generators). Better security of goods and people. Compliance and installation of visual markings on electrical installations. |
The basic unit transforms into a cutting, bending or punching machine within seconds by changing the working parts.
Benefits:
1. INSULATING TUBES AND STICKS
2.INSULATING TUBES AND STICKS Why a quality tube IEC 60855-1? Guarantee of absolute safety against electrical hazard High insulating power no matter the environment of use origin ( interface foam / fiberglass / resin ) Guarantee of the mechanical strength Guarantee of the performance over time No alteration of the dielectric and mechanical properties High performance varnish(UV)
3.INSULATING TUBES AND STICKS The foam-cored insulating tube IEC 60855-1 Uniform PU closed-cell foam (waterproof) Foam-resin-fiberglass interface Filling the open cells on the surface of the foam 3 longitudinal layers of fiberglass 100% of the resistance operated in flexion 2 transversal layers of fiberglass 100% of its strength operated in torsion and compression
4.INSULATING TUBES AND STICKS The foam-cored insulating tubes (foam filled) What they show you What is hidden
5.INSULATING TUBES AND STICKS CONCLUSION FAMECA manufactures its foam-cored tube differently from its competitors : The tube is manufactured directly around a sealed, rigid core of polyurethane foam instead of filling their tube with foam after the tube has been made ASK FOR FAMECA IEC 60855-1 QUALITY
6.INSULATING TUBES AND STICKS Our solution since 1996 The IEC 60855-1 standard for foam-cored insulating tubes and insulating tubes manufactured in synthetic materials intended for live working tools and materials ( U>1 kV) Applied to all our insulating sticks
Design permits use as both H frame and C frame press
OPEN THROAT PRESSES
Solenoid valve with 12 volt remote control hand switch.
Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 3, 1 meter remote motor control.
Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions.
Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 700 bari: PE17267/81 dBA; PE2170 dBA measured at 0, 9 meter distance, all sides.
PUMP ELECTRICAL SPECIFICATIONS
PE17 Series 1/2 hp, 115 volt, 60 cycle, single phase.
PE21 Series 1 hp, 115 volt, 60 cycle, single phase. Both pumps available in 230 volt, 50 cycle, add suffix -220 to order no.
OPEN THROAT® Presses:
| ORDER NUMBER |
CAPACITY (TONS) |
TYPE OF CYLINDER USED |
STROKE (MM) |
CYLINDER MODEL |
SPEED (MM./MIN.)††† | TYPE PUMP |
VALVE TYPE |
PUMP MODEL † |
WEIGHT (KG) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| ADVANCE | PRESSING | |||||||||
| SPA2514 | 25 | Single-Acting | 362 | C2514C | 249 | 30 | Air | 2-Way Foot | PA6 | 309 |
| SPM2514 | 25 | Single-Acting | 362 | C2514C | 12,4 mm/stroke | 0,8 mm/stroke | Hand | Load-Release | P159 | 314 |
| SPE2514 | 25 | Single-Acting | 362 | C2514C | 1.184 | 84 | Electric | 2-Way†† | PE172-E220 | 301 |
| SPE2514S | 25 | Single-Acting | 362 | C2514C | 1.321 | 102 | Electric | 3-Way† | PE172S-E220 | 344 |
| SPE2514DS | 25 | Double-Acting | 362 | RD2514 | 1.321 | 102 | Electric | 4-Way† | PE174-E220 | 357 |
addedasetofcontrolsystem(importfromGermany)
KLW4100SeriesAutomaticElectricalPump
sharedasamedesignwithKLW4000seriesstandardElectricalPump,
itjustwasaddedasetofcontrolsystem(importfromGermany)onthebasicofKLW4000standardPump,
itinheritedallthecharacteristicsofKLW4000, someothercharacteristicsofthisPumpareasbelow:
-SimpleOperation:
OperatewithoneButton, theoperatorjustpresseddownthebuttononcetimetoachievethetaskoftighteningandloosing.
HighEfficiency:
ComparewiththegeneralPump, KLW4100AutomaticPumphascompactoperationprocesstoreducesomeneedlessactionandincreaseapproximate50%ofworkingefficiency.
-Manual/Automatic
Besidesoftheautomaticoperation, thePumpalsohasthefunctionofmanualoperation, forsomespecialoperation, KLW4100alsocanbeworkedwell.
AdditionallytheKLW4100canwork24hourswithoutstopwithradiator, WRENalsocanmakethePumpwithotherkindsofmotorsaccordingcustomersrequirement.
POSITIVE MECHANICAL LOCK TO SUPPORT LOAD.
| ORDER NUMBER |
CYLINDER CAPACITY (TONS.) |
STROKE (MM.) |
OIL CAPACITY (CU. CM.) |
BORE DIAMETER (MM.) |
CYLINDER EFFECTIVE AREA (SQ. CM.) |
METRIC TONS AT 700 BAR |
WEIGHT (KG.) |
|---|---|---|---|---|---|---|---|
| R552L | 55 | 50,8 | 362 | 95,3 | 71,2 | 50,1 | 15,3 |
| R556L | 55 | 152,4 | 1.087 | 95,3 | 71,2 | 50,1 | 26,3 |
| R5510L | 55 | 254,0 | 1.811 | 95,3 | 71,2 | 50,1 | 36,3 |
| R1002L | 100 | 50,8 | 677 | 130,2 | 133,1 | 93,4 | 30,0 |
| R1006L | 100 | 152,4 | 2.030 | 130,2 | 133,1 | 93,4 | 46,8 |
| R10010L | 100 | 254,0 | 3.383 | 130,2 | 133,1 | 93,4 | 64,5 |
| R1502L | 150 | 50,8 | 1.007 | 158,8 | 197,9 | 139,1 | 53,0 |
| R1506L | 150 | 152,4 | 3.019 | 158,8 | 197,9 | 139,1 | 80,4 |
| R2002L | 200 | 50,8 | 1.355 | 184,2 | 266,3 | 187,2 | 83,1 |
| R2006L | 200 | 152,4 | 4.062 | 184,2 | 266,3 | 187,2 | 117,6 |
| R2802L | 280 | 50,8 | 1.861 | 215,9 | 366,0 | 257,3 | 118,5 |
| R2806L | 280 | 152,4 | 5.583 | 215,9 | 366,0 | 257,3 | 163,0 |
| R28010L | 280 | 254,0 | 9.305 | 215,9 | 366,0 | 257,3 | 208,1 |
| R3552L | 355 | 50,8 | 2.326 | 241,3 | 457,2 | 321,4 | 173.0 |
| R3556L | 355 | 152,4 | 6.975 | 241,3 | 457,2 | 321,4 | 232,5 |
| R4302L | 430 | 50,8 | 2.841 | 266.7 | 558,5 | 392,7 | 252,4 |
| R4306L | 430 | 152,4 | 9.520 | 266.7 | 558,5 | 392,7 | 329,2 |
| R43010L | 430 | 254,0 | 14.201 | 266.7 | 558,5 | 392,7 | 405,9 |
| R5652L | 565 | 50,8 | 3.710 | 304,8 | 729,5 | 512,9 | 368,2 |
| R5656L | 565 | 152,4 | 11.129 | 304,8 | 729,5 | 512,9 | 468,0 |
| R56510L | 565 | 254,0 | 18.548 | 304,8 | 729,5 | 512,9 | 568,0 |
| * Note: Supported loads not to exceed the rated capacity of the cylinders.
Not intended to support additional dynamic loads, such as those applied by moving vehicles. |
|||||||
IDEAL FOR PULLING AND PRESSING.
Model RH203 and RHA306 do not feature the collar thread. See charts in Specifications.
ASME B30.1 10,000 PSI / 700 BAR
| ORDER NUMBER |
CYLINDER CAPACITY (TONS) |
STROKE (MM.) |
OIL CAPACITY (CU. CM.) |
MOUNTING HOLES AND BOLT CIRCLE (MM.) |
CYLINDER EFFECTIVE AREA (SQ. CM.) |
METRIC TONS AT 700 BAR |
WEIGHT (KG.) |
|---|---|---|---|---|---|---|---|
| RH102 | 10 | 65,3 | 91 | 1/4-20 x 60,3 | 14,3 | 10,0 | 4,1 |
| RH108 | 10 | 203,2 | 290 | 1/4-20 x 60,3 | 14,3 | 10,0 | 8,5 |
| RH120** | 12 | 7,9 | 14 | 5/16-18 x 50,8 | 17,8 | 12,5 | 1,4 |
| RH121 | 12 | 41,3 | 74 | – | 17,8 | 12,5 | 3,0 |
| RH121T* | 12 | 41,3 | 74 | – | 17,8 | 12,5 | 3,0 |
| RH123 | 12 | 76,2 | 136 | – | 17,8 | 12,5 | 4,0 |
| RH202 | 20 | 50,8 | 155 | 3/8-16 x 82,6 | 30,4 | 21,4 | 7,3 |
| RH203 | 20 | 76,2 | 193 | 3/8-16 x 82,6 | 25,3 | 17,8 | 9,1 |
| RH206 | 20 | 152,4 | 465 | 3/8-16 x 82,6 | 30,4 | 21,4 | 13,7 |
| RH302 | 30 | 63,5 | 260 | 7/16-20 x 92,1 | 40,9 | 28,8 | 11,6 |
| RHA306 | 30 | 149,2 | 625 | – | 40,9 | 28,8 | 9,9 |
| RH306 | 30 | 152,4 | 625 | 7/16-20 x 92,1 | 40,9 | 28,8 | 17,7 |
| RH503 | 50 | 76,2 | 534 | 5/8-18 x 120,7 | 70,0 | 49,3 | 21,2 |
| RH603* | 60 | 76,2 | 607 | 1/2-13 x 130,2 | 79,4 | 55,9 | 27,2 |
| RH606* | 60 | 152,4 | 1.211 | 1/2-13 x 130,2 | 79,4 | 55,9 | 35,4 |
| RH1003* | 100 | 76,2 | 1.014 | – | 133,0 | 93,5 | 52,2 |
| * Supplied with carrying handles. ** RH120 and RH121T do not have an internal threaded insert, but do have 3/4-16 internal thread. The RH120 inlet port is 1/4” NPTF. |
|||||||
HollowPlungerCylinders
ASME B30.1 10, 000 PSI / 700 BAR
30 to 200 ton capacity
stroke: 76.2 mm to 203.2 mm
700 bar/10, 000 psi
FOR PULLING AND TENSIONING OF CABLES, ANCHOR BOLTS, FORCING SCREWS.
| ORDER NUMBER |
CYLINDER CAPACITY (TONS) |
STROKE (MM.) |
OIL CAPACITY (CU. CM.) |
MOUNTING HOLES AND BOLT CIRCLE (MM.) |
CYLINDER EFFECTIVE AREA (SQ. CM.) |
METRIC TONS AT 700 BAR |
WEIGHT (KG.) |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| PUSH | PULL | PUSH | PULL | PUSH | PULL | PUSH | PULL | ||||
| RH303 | 30 | 15 | 76,2 | 289 | 167 | 3/8-16 x 92,1 | 38,0 | 21,8 | 26,8 | 15,3 | 13,5 |
| RH306D | 30 | 15 | 152,4 | 580 | 333 | 7/16-20 x 92,1 | 38,0 | 21,8 | 26,8 | 15,3 | 20,4 |
| RH3010 | 30 | 20 | 257,2 | 1.082 | 672 | – | 42,2 | 26,1 | 29,7 | 18,3 | 27,7 |
| RHA604D | 60 | 25 | 101,6 | 807 | 338 | 1/2-13 x 130,2 | 79,4 | 33,2 | 55,8 | 25,1 | 16,2 |
| RH605* | 60 | 25 | 127,0 | 1.009 | 423 | 1/2-13 x 130,2 | 79,4 | 33,2 | 55,8 | 25,1 | 33,1 |
| RH6010* | 60 | 40 | 257,2 | 2.181 | 1.427 | – | 84,8 | 55,4 | 59,6 | 38,9 | 54,5 |
| RH1001 | 100 | 45 | 38,1 | 526 | 233 | 5/8-11 x 177,8 | 138,0 | 60,8 | 97,0 | 42,7 | 38,6 |
| RH1006* | 100 | 50 | 152,4 | 1.971 | 1.076 | 1/2-13 x 139,7 | 129,2 | 70,5 | 90,8 | 49,6 | 43,1 |
| RH10010* | 100 | 45 | 257,2 | 3.552 | 1.556 | – | 138,0 | 60,8 | 97,0 | 42,7 | 109,0 |
| RH1505* | 150 | 70 | 127,0 | 2.475 | 1.207 | – | 194,1 | 94,8 | 136,9 | 66,8 | 67,2 |
| RH1508* | 150 | 75 | 203,2 | 3.929 | 2.086 | – | 193,2 | 102,6 | 135,9 | 72,1 | 103,1 |
| RH2008* | 200 | 75 | 203,2 | 5.307 | 2.093 | 1 1/4-7 x 198,1 | 260,9 | 102,9 | 183,5 | 72,4 | 142,0 |
| * Supplied with carrying handles | |||||||||||
POSITIVE MECHANICAL LOCK TO SUPPORT LOAD.
| ORDER NUMBER |
CYLINDER CAPACITY (TONS.) |
STROKE (MM.) |
OIL CAPACITY (CU. CM.) |
BORE DIAMETER (MM.) |
CYLINDER EFFECTIVE AREA (SQ. CM.) |
METRIC TONS AT 700 BAR |
WEIGHT (KG.) |
|---|---|---|---|---|---|---|---|
| R552L | 55 | 50,8 | 362 | 95,3 | 71,2 | 50,1 | 15,3 |
| R556L | 55 | 152,4 | 1.087 | 95,3 | 71,2 | 50,1 | 26,3 |
| R5510L | 55 | 254,0 | 1.811 | 95,3 | 71,2 | 50,1 | 36,3 |
| R1002L | 100 | 50,8 | 677 | 130,2 | 133,1 | 93,4 | 30,0 |
| R1006L | 100 | 152,4 | 2.030 | 130,2 | 133,1 | 93,4 | 46,8 |
| R10010L | 100 | 254,0 | 3.383 | 130,2 | 133,1 | 93,4 | 64,5 |
| R1502L | 150 | 50,8 | 1.007 | 158,8 | 197,9 | 139,1 | 53,0 |
| R1506L | 150 | 152,4 | 3.019 | 158,8 | 197,9 | 139,1 | 80,4 |
| R2002L | 200 | 50,8 | 1.355 | 184,2 | 266,3 | 187,2 | 83,1 |
| R2006L | 200 | 152,4 | 4.062 | 184,2 | 266,3 | 187,2 | 117,6 |
| R2802L | 280 | 50,8 | 1.861 | 215,9 | 366,0 | 257,3 | 118,5 |
| R2806L | 280 | 152,4 | 5.583 | 215,9 | 366,0 | 257,3 | 163,0 |
| R28010L | 280 | 254,0 | 9.305 | 215,9 | 366,0 | 257,3 | 208,1 |
| R3552L | 355 | 50,8 | 2.326 | 241,3 | 457,2 | 321,4 | 173.0 |
| R3556L | 355 | 152,4 | 6.975 | 241,3 | 457,2 | 321,4 | 232,5 |
| R4302L | 430 | 50,8 | 2.841 | 266.7 | 558,5 | 392,7 | 252,4 |
| R4306L | 430 | 152,4 | 9.520 | 266.7 | 558,5 | 392,7 | 329,2 |
| R43010L | 430 | 254,0 | 14.201 | 266.7 | 558,5 | 392,7 | 405,9 |
| R5652L | 565 | 50,8 | 3.710 | 304,8 | 729,5 | 512,9 | 368,2 |
| R5656L | 565 | 152,4 | 11.129 | 304,8 | 729,5 | 512,9 | 468,0 |
| R56510L | 565 | 254,0 | 18.548 | 304,8 | 729,5 | 512,9 | 568,0 |
| * Note: Supported loads not to exceed the rated capacity of the cylinders.
Not intended to support additional dynamic loads, such as those applied by moving vehicles. |
|||||||
Aluminium cylinders from Power Team are single-acting, spring return general purpose actuators, providing hydraulic force from 20 to 100 tons. They are designed for jacking and other non-production applications.
The main advantage of our aluminium cylinders is that they are half the weight of steel cylinders of equal capacity. The hard-coated aluminium piston rod and cylinder bore provide enhanced resistance to wear and corrosion, while also providing increased resistance to sparking in explosive environments.
Heavier models are equipped with carrying handles. This range is also compatible with a wide range of accessories, including aluminium cylinder bases, handles, seal kits, standard couplers and swivel caps.
MODEL NO:- MS31000
Robust construction for long life
Ratio accuracy of+/-5%
Supplied with two reaction bar
Every product attach protection case
|
Model |
Ratio |
Input Drive(in) |
Output Drive(in) |
Max Torque |
A |
B |
C |
D |
Tool weight |
Reaction Arm Weight |
|
|
N.m |
Lb.ft |
mm |
mm |
mm |
mm |
kg |
kg |
||||
|
M3.31000 |
3.3:1 |
1/2″ |
3/4″ |
1000 |
750 |
71 |
85 |
245 / 175 |
130 |
1.35 |
0.77+0.63 |
We are one of the most consistent exporters and suppliers of a quality approved range of Low Height Hydraulic Cylinders in Telangana. The machine is essentially light weight and particularly designed for using in limited space. It’s a single-acting spring return cylinder with plated steel plungers. It also contains a grooved plunger end with threaded holes for mounting tilt saddles. It’s easy to carry for the integral handle on RCS-1002. Its plunger wipes reduce contaminations, prolonging cylinder life. CR-400 Coupler and dust caps are included in all models.
