Delhi, India
Our Products
| Size | A1 | B1 HABØ |
C1 | D1 | E1 | F1 Ø |
F1 KEY WAY. |
M1 | W1 | L1 |
| B 1107 | 4.45 | 17/16 | 3.46 | 2.40 | 2.05 | ¾ | 1/8 x 1/8 | 3.35 | 3.62 | 3.22 |
| C 2115 | 4.65 | 115/16 | 3.66 | 2.48 | 2.17 | 15/16 | 3/16 x 3/16 | 3.54 | 3.82 | 3.56 |
| D 3203 | 5.16 | 23/16 | 4.41 | 2.76 | 2.40 | 11/8 | ¼ x ¼ | 3.94 | 4.13 | 3.62 |
| E 4207 | 5.67 | 27/16 | 5.70 | 3.07 | 2.60 | 11/8 | ¼ x ¼ | 4.11 | 4.64 | 4.00 |
| F 5215 | 6.45 | 215/16 | 5.90 | 3.50 | 2.95 | 1¼ | ¼ x ¼ | 4.60 | 5.04 | 4.00 |
| G 6307 | 7.54 | 37/16 | 6.14 | 4.00 | 3.54 | 1¾ | 3/8 x 3/8 | 5.15 | 5.98 | 5.50 |
| H 7315 | 8.39 | 315/16 | 6.34 | 4.45 | 3.94 | 115/16 | ½ x ½ | 5.78 | 6.69 | 6.47 |
| J 8407 | 8.73 | 47/16 | 7.28 | 4.60 | 4.13 | 2¼ | ½ x ½ | 6.10 | 7.71 | 6.47 |
Shaft Mounted Screw Conveyor Units are designed with tapered roller bearings on the output end to take in end thrusts. The important characteristics of shaft mounted screw conveyor units are;
| The gear units are available in Imperial bores and keyways. | |
| CEMA bolt on adaptor flanges features double lip seals on both sides. | |
| The adaptor center is open for contaminate to drop out for optimized sealing. | |
| 3 Holes drilled drive shafts are available in various sizes |
| Size | A1 | B1 HABØ |
C1 | D1 | E1 | F1 Ø |
F1 KEY WAY. |
M1 | W1 | L1 |
| B 1107 | 4.45 | 17/16 | 3.46 | 2.40 | 2.05 | ¾ | 1/8 x 1/8 | 3.35 | 3.62 | 3.22 |
| C 2115 | 4.65 | 115/16 | 3.66 | 2.48 | 2.17 | 15/16 | 3/16 x 3/16 | 3.54 | 3.82 | 3.56 |
| D 3203 | 5.16 | 23/16 | 4.41 | 2.76 | 2.40 | 11/8 | ¼ x ¼ | 3.94 | 4.13 | 3.62 |
| E 4207 | 5.67 | 27/16 | 5.70 | 3.07 | 2.60 | 11/8 | ¼ x ¼ | 4.11 | 4.64 | 4.00 |
| F 5215 | 6.45 | 215/16 | 5.90 | 3.50 | 2.95 | 1¼ | ¼ x ¼ | 4.60 | 5.04 | 4.00 |
| G 6307 | 7.54 | 37/16 | 6.14 | 4.00 | 3.54 | 1¾ | 3/8 x 3/8 | 5.15 | 5.98 | 5.50 |
| H 7315 | 8.39 | 315/16 | 6.34 | 4.45 | 3.94 | 115/16 | ½ x ½ | 5.78 | 6.69 | 6.47 |
| J 8407 | 8.73 | 47/16 | 7.28 | 4.60 | 4.13 | 2¼ | ½ x ½ | 6.10 | 7.71 | 6.47 |
| Size | D2 | M2 | N2 | BUSHES ØB | |
| STD | Other Available | ||||
| B | 78 | 84 | 162 | 30 | 20, 25, 1", ¾" |
| C | 81 | 87 | 168 | 40 | 35, 32, 30, 1¼", 1½" |
| D | 86 | 94 | 180 | 50 | 48, 45, 42, 40, 38, 1¼", 1½", 1¾" |
| E | 92 | 102 | 194 | 55 | 50, 45, 42, 1½", 1¾", 2" |
| F | 101 | 115 | 216 | 65 | 60, 55, 50, 2", 2¼", 2½" |
| G | 112 | 123 | 235 | 75 | 70, 65, 60, 2¼", 2½", 2¾" |
| H | 120 | 134 | 254 | 85 | 80, 75, 70, 2½", 2¾", 3" |
| J | 130 | 145 | 275 | 100 | 90, 95, 80, 75, 3", 3½", 4" |
| S | 155 | 169 | 324 | 120 | 110, 100, 95, 4¼", 4", 3½" |
We have customized the Shaft Mounted Speed Reducer and designed a keyless gear unit. It is a quick release taper bushing and easier to install and remove that any comparable bushing system. The bushing comprises of a taper sleeve and threaded collar which ensures grater gripping power.
However, in order to prevent fretting corrosion and easy removal, shaft mounted taper clamps and the support bushes are manufactured in stainless steels. Taper clamps are available in various sizes of bores and securing easy method of mounting on different shaft sizes.
| Size | D2 | M2 | N2 | BUSHES ØB | |
| STD | Other Available | ||||
| B | 78 | 84 | 162 | 30 | 20, 25, 1", ¾" |
| C | 81 | 87 | 168 | 40 | 35, 32, 30, 1¼", 1½" |
| D | 86 | 94 | 180 | 50 | 48, 45, 42, 40, 38, 1¼", 1½", 1¾" |
| E | 92 | 102 | 194 | 55 | 50, 45, 42, 1½", 1¾", 2" |
| F | 101 | 115 | 216 | 65 | 60, 55, 50, 2", 2¼", 2½" |
| G | 112 | 123 | 235 | 75 | 70, 65, 60, 2¼", 2½", 2¾" |
| H | 120 | 134 | 254 | 85 | 80, 75, 70, 2½", 2¾", 3" |
| J | 130 | 145 | 275 | 100 | 90, 95, 80, 75, 3", 3½", 4" |
| S | 155 | 169 | 324 | 120 | 110, 100, 95, 4¼", 4", 3½" |
