eak acid cation (WAC) resin plays an important role in water treatment. It is usually manufactured from acrylic acid and divinyl benzene (DVB) as a crosslinking agent, although some manufacturers make it from methacrylic acid or its derivatives. It is a widely used unit in demineralisation plants for dealkalisation of water. The total capacity of WAC resin at 210 gl as CaCO3 is higher than other ion exchange resins. The resin is regenerated with dilute acid using near stoichiometric quantity. Hence, the waste water generated during regeneration is almost neutral. WAC resin operates in a alkaline pH range and exhibits large volume change when converted to different forms. Hence, it is called the workhorse of water treatment processes.

The INDION lamella clarifier provides an effective answer for the clarification of water and waste water. The lamella clarifier achieves solid-liquid separation by directing the liquid between a series of inclined plates called lamella. The settling surface of each plate is equivalent to its horizontal projection. Lamellae are normally spaced approx. 50 mm apart, with the result that large settling surfaces are concentrated within a relatively small floor area.

Aerobic Treatment: T aerator bio-zone which is a combined fixed film reactor and active aeration system mounted on a horizontal shaft. The aerator provides a solid surface area for micro-organisms to attach themselves; these then feed on the organic matter present in the effluent. Rotation of the drums aerates the liquid. The bio-zone is self-cleansing and does not require extraneous pumping or sludge return. Final Settlement: The treated effluent then moves to the settlement area. This area contains a lamella parallel plate assembly for settling finer particles. The submersible pump removes sludge to the sludge storage compartment on a regular timed basis.

Multigrade filter is a depth filter that makes use of coarse and fine media mixed together in a fixed proportion. This arrangement produces a filter bed with adequate pore dimensions for retaining both large and small suspended particles. This filter performs at a substantially higher specific flow rate than conventional filters. Specific flow rates of 0.82 – 1.64 ftmin have been successfully obtained for treating waters containing 25 – 50 ppm suspended solids respectively to produce filtrate with less than 5 ppm.

eak acid cation (WAC) resin plays an important role in water treatment. It is usually manufactured from acrylic acid and divinyl benzene (DVB) as a crosslinking agent, although some manufacturers make it from methacrylic acid or its derivatives. It is a widely used unit in demineralisation plants for dealkalisation of water. The total capacity of WAC resin at 210 gl as CaCO3 is higher than other ion exchange resins. The resin is regenerated with dilute acid using near stoichiometric quantity. Hence, the waste water generated during regeneration is almost neutral. WAC resin operates in a alkaline pH range and exhibits large volume change when converted to different forms. Hence, it is called the workhorse of water treatment processes.

Silica in water is present mostly as reactive or dissolved silica. In surface waters, a small quantity of non-reactive silica (in colloidal dimensions) may also be present during some parts of the year, especially during the monsoon. As water passes through and over various soils into our lakes and rivers, the formation of carbon dioxide and organic acids resulting from microbial activity results in acid degradation of the silicate minerals (particularly clay particles). This acid attack on minerals will dissolve the iron, aluminum etc. and interaction of these components with silica results in the formation of colloidal silica that is stabilised with a coating of organic matter.

Ion Exchange Systems & Products Softeners Demineralisation Plants Portables Swift Plus Layered Bed Conventional Dealkalisers Condensate Polishing Unit EDI Ion Exchange Resins Industrial Water Treatment Potable Water Treatment Nuclear Grade Resins Applications Catalyst Grade Resins Hydrometallurgy Applications Food & Beverage Sugar Decolourisation Chemical & Special Process Applications biodiesel Pharmaceutical Grade Resins

Aerobic Treatment: T aerator bio-zone which is a combined fixed film reactor and active aeration system mounted on a horizontal shaft. The aerator provides a solid surface area for micro-organisms to attach themselves; these then feed on the organic matter present in the effluent. Rotation of the drums aerates the liquid. The bio-zone is self-cleansing and does not require extraneous pumping or sludge return. Final Settlement: The treated effluent then moves to the settlement area. This area contains a lamella parallel plate assembly for settling finer particles. The submersible pump removes sludge to the sludge storage compartment on a regular timed basis.

eak acid cation (WAC) resin plays an important role in water treatment. It is usually manufactured from acrylic acid and divinyl benzene (DVB) as a crosslinking agent, although some manufacturers make it from methacrylic acid or its derivatives. It is a widely used unit in demineralisation plants for dealkalisation of water. The total capacity of WAC resin at 210 gl as CaCO3 is higher than other ion exchange resins. The resin is regenerated with dilute acid using near stoichiometric quantity. Hence, the waste water generated during regeneration is almost neutral. WAC resin operates in a alkaline pH range and exhibits large volume change when converted to different forms. Hence, it is called the workhorse of water treatment processes.