Ipwt Corporation Mumbai, Maharashtra

Heavy duty power rodding machine is designed to remove hard chokes, roots of the trees and obstructions from the storm water drain, ducts and sewer lines. The machine shall get a drive from the chassis engine through a Power Take Off (P.T.O). The machine shall be capable of pushing, pulling and rotating 10mm diameter sectional steel sewer rods using various cleaning tools to clean and remove obstruction from storm and sanitary sewer lines. The unit shall be suitable to carry rod storage reel and necessary tools.

COMPAK®is especially designed to make the task of garbage collection in the city main streets, easy and effective. These units are state of the art and can be parked at one central collection point. COMPAK® units are designed not only to compact garbage but also to safely store high liquid content wastes in a safe controlled environment. It provides economy in garbage compaction resulting in lesser number of trips to landfill, saving on fuel cost. The refuse is loaded directly into the compactor head, which packs the refuse into the container. Application: 1. For collection and hygienic storage of garbage in markets and densely populated localities 2. Allows high volumes of garbage storage 3. The main central garbage collection and compacting container in the continuous relay system resulting in achievement of large volume of garbage transfer. Advantages: 1. Carries the garbage load of 5 conventional trucks. 2. Enables the ram to dwell against the compacted waste longer for superior compaction ratios. 3. Quick Clean Tank eliminates troublesome fuild build-up behind the ram. 4. Odour elimination device available. 5. Low noise operation.

Mobile Auto Tipper The Auto tipper shall be useful for transportation and refuse collection from narrow lanes, individual houses to its disposal point. The operation of unloading i.e. tilting of container to its disposal point shall be hydraulic. The capacity of FRP container hopper shall be approximately 1.5 cu.m. Application 1. Mechanical tipping arrangement 2. Easy to operate as no special skill is required 3. Popular system : low capital cost 4. Quick turn-around as garbage transferred to main collection container or point 5. Very low maintenance cost 6. Modern equipment : increases dignity of labour Advantages: 1. Mechanical tipping arrangement 2. Easy to operate as no special skill is required 3.Popular system : low capital cost 4. Quick turn-around as garbage transferred to main collection container or point 5. Very low maintenance cost 6. Modern equipment : increases dignity of labour

Dumper Placer / Skip Loader: The Twin Dumper Placer shall be useful for transportation of refuse, silt, grit or any other waste from the collection point to its disposal point by two containers at a time. The operation of lifting and placing the container on the vehicle, transporting to its disposal point and unloading shall be hydraulic. The lifting capacity of steel garbage container bin shall be 2.5 cu.m. The equipment shall be operated hydraulically. Applicarion: 1. Suitable for handling wet refuse. 2. Suitable for primary collection from main streets using container relay system. 3. Achieves large volumes of garbage transfer in a continuous relay system. 4. Allows safe, hygienic containerised collection and storage of refuse. 5. Allows multi-point pick-up application of truck through specially designed containers. Advantages: 1. Machanized skip bin-lifting arrangement. 2. Easy to operate as no special skill is required. 3. Popular system: low capital cost. 4. Quick and efficient lifting, transportation and unloading. 5. Need not be positioned precisely for hooking the container. 6. Very low maintenance cost. 7. Modern equipment: increases dignity of labour.

The IPWT Sidepak® Garbage Compactor is the most suitable system for solid waste transportation from market places, industrial and commercial places approachable through streets, narrowest lanes, and by-lanes. The IPWT Sidepak® is capable of manual loading of refuse from the side towards the foot-path into the refuse body (6m3). Once the garbage is loaded into the extreme front side of the unit body, it is pushed hydraulically toward the rear till the body is full. The garbage is dumped from the rear full cross section open able door by means of hydraulically operated push plate. Application: -Allows point-to-point collection of refuse. -Convenient manual mechanised side loading and unloading. -High pressure positive garbage compaction. -Hygienic transportation in fully enclosed body. Advantages: -Carries garbage load of two conventional trucks.Limited dimensions, suitable to operate on smaller streets. -Side – loading prevents cross-parking, thus avoiding traffic pile-up. -Mechanised bin-lifting arrangement option for ease of operation. -Maintenance is virtually nil for the first few years. -Easy to operate as no special skill is required.

The rear loading compactor shall be mounted on suitable 16 Ton GVW chassis. The compactor shall comprise of three main parts. 1. The body and Ejection Barrier 2. The Hopper and compaction hydraulic unit at rear body. 3. The bin lifter Mechanism. Application: 1. Allows point-to-point collection of refuse. 2. Convenient manual mechanised rear loading and unloading. 3. High pressure positive garbage compaction. 4. Hygienic transportation in fully enclosed body. Advantages: 1. Carries garbage load of two conventional trucks. 2. Unique compaction mechanism. 3. Mechanised bin-lifting arrangement for ease of operation. 4. Noticeable time and fuel-saving, lesser polluion. 5. Low maintenance cost. 6. Easy to operate as no special skill is required. 7. High Pressure Self washing system 8. Sump Tank 9. Limited dimensions, suitable operate on smaller streets.