We are offering integratingsphere.
diameter: is-0.3m (0.3m)is-0.5m (0.5m)is-1.0m (1.0m)is-1.5m (1.5m)is-1.75m (1.75m)is-2.0m (2.0m). Other sizes can be designed according to the customers request.
the painting of integrating spheres is according to cie pub.no.84(1989)
material: pure barium soleplate (baso4)
baso4 coating: ()0.96(450nm800nm) and ()0.92(380nm450nm)
fine diffuse reflection: reflectance0.8 and accuracy of ()

We are offering dc load.
M9811 is applicated in production line(cell phone charger, cell phone battery, electric vehicle battery, switching power supplier, linear power supplier, led driver), research insititutes, automotive electronics, aeronautics and astronautics, ships, solar cells fule cell, etc.b.
Feature:
six high speed operation modes: cc, cr, cv, cw, cc+cv, cr+cw
over current, over voltage, over power, over heat, polarity reversed protection
high-luminance vfd screen with two lines& four channels display
intelligent fan system fan will be automatically initiated according to the temperature
soft start time setting, carrying the power supplier according to the voltage value set
battery testing and short-circuit function
available of dynamic testing and rising edge and falling edge setting
supporting external trigger input and output
external current waveform monitor terminal
supporting remote voltage compensation and multi-data storage
power-on-self-test, software calibration and standard rack mount
it can do led power driver test, compactible with simulating the capacitances sensitive driver
arbitrary waveform editing in list function
communication mode: rs232rs485usb.

We offer goniometer.
Measurement:
luminous intensity data, luminous intensity distribution, zonal luminous flux, luminaries efficiency, luminance distribution, coefficient of utilization, luminance limitation curves glare, maximum ratio of distance to height, equal illuminance diagrams, curves of luminaires vs lighting area, lsocandela diagrams, efficient luminescence angle, etc.
Features:
many national patents pending on hardware and software.
cie class a & constant temperature photo detector (class l detector can be optional).
high degree of intelligent and test function is complete.
the rotation motor is from japan mitsubishi motors and it uses german angle decode system, it will help smoothly and high accuracy rotation. It is very stable when start and stop.
the working principles are according to iesna and cie. This instrument is specially recommended by lm-75, lm-79 and cie121-1996.
with some optional instruments, it has good expanding functions
the position and working state remain the same as it is under working.
special collimation device with laser cross line, conveniently and accurately fix the position of the tested luminaries.
Specifications:
the tested luminaire rotates around the mirror with an angle of ()180(or 0-360) and the tested luminaire rotates around itself with an angle of (c)180(or 0-360).
the accuracy of angle: 0.0016 resolution of angle: 0.01
accuracy of photometry: cie class a (standard class) or class l.
the test result can be exported as cie, ies, ldt and other format files. This kind of format files can be transferred by other illumination and luminaire design software such as dialux.
rs-232c standard interface can be connected to pc, english version software can run in winxp or win7

We are offering spectrometers.
Lms-9000alms-9000b is according to lm-79 clause 9.1. It is designed to have a capability of producing any visible spectral distribution, mimicking various light sources in the visible region by feedback control of the radiant power emitted by individual leds. This led test system will be used as a transfer standard for photometric, colorimetric and radiometric applications.
Lms-9000b is quick test with high accuracy, it used in scientific lab test. Due to the test speed and lms-9000b can work with lsg-1600blsg-1800blsg-1900lsg-2000 goniophotometer to do the spatial color and spectrum test.
Measures:
colorimetric: chromaticity coordinates, cct, color ratio, peak wavelength, half bandwidth, dominant wavelength, color purity, cri, spectrum test
photometric: luminous flux, luminous efficiency, radiant power, pupil flux, pupil flux efficiency, pupil factor, cirtopic flux
electrical: voltage, current, power, power factor
specifications:
spectral range wavelength: 380nm800nm
spectral wavelength accuracy: 0.5nm, wavelength reproducibility: 0.2nm
sample scanning steps: 0.1nm
accuracy of chromaticity coordinate (x, y): 0.003 (lms-9000a) and 0.002 (lms-9000b)
correlated color temperature cct: 1, 000k100, 000k, cct accuracy: 0.3%
color rendering index range: 0100.0, accuracy: (0.3%rd0.3)
photometric linear: 0.5% (lms-9000a) and 0.3% (lms-9000b)
stray light:

We are offering automatic lightning surge generator (or lightning surge immunity) sg61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the iec 61000-4-5, en61000-4-5 and gbt17626.5 standards.
Specifications:
product model sg61000-5 sg61000-5t sg61000-5h
wave generator combination wave combination wave combination wave ccitt(option)
output voltage (open) 1.250s20% 1.250s20% 1.250s20% 10700s20%
output current (short) 820s20% 820s20% 820s20% 5320s20%
output impedance 2 2 2 and 500 40
output voltage range 06kv10% 06kv10% 010kv10% 06kv10%
output current range 03ka10% 03ka10% 05ka10% 0150ka10%
operation mode automatic
surge repetition 19999 times 19999 times 19999 times 19999 times
interval time 209999s 209999s 209999s 209999s
polarity positive, negative or positivenegative automatic
phase shift asynchronous, synchronization 0 360 or specific angle na
couplingdecoupling network (cdn) includes a 16a single phase cdn includes a 20a 3phases cdn includes a 20a 3phases cdn built-in 30a 3phases cdn
working power ac220v(option 110v)10%, 5060hz
dimensions (wxdxh) 44x45x35cm 44x45x20cm and 44x45x35cm (cdn) 44x45x20cm and 44x45x35cm (cdn) 56x69x157cm (with cabinet)
gross weight about 30kg about 48kg about 48kg about 300kg
touch screen with super big lcd and built-in windows ce

We are offering battery testing service as per is 1651
as per iec: 60896-11
a. Verification of constructional requirement
a. Capacity test
b. Marking & packing
b. Charge retention test
c. Verification of dimension
c. Endurance in discharge-charge cycle
d. Ah and watt hr efficiency test
d. Endurance in over charge

e. Test for suitability for floating battery operation

f. Short circuit and internal resistance test

We are offering household applience testing.
Motor operated kitchen appliances, electric irons, floor treatment machines, warming plates, refrigerators, appliances for heating liquids, appliances for skin and hair care, ice makers, hair dryers, vacuum cleaners, heating appliances, air conditioning devices, washing machines, pumps, insect killers, ironers , stoves, humidifiers etc.

Testing as per iecen 60335 , is 302

We can do testing as per is standard of the led driver , luminary , cables , control panel , lab instrument , testing instruments , power supply , information technology equipments , pda , keyboards , junction box , cable tray , electric motor , process control instruments , etc.

We are offering led luminaires testing services.
Fixed general purpose luminaries, luminaries for road and street lighting, aquarium luminaries, lighting chains, emergency lighting,

general safety testing for luminaries
marking
construction
external and internal wiring
provision for earthing
protection against electric c shock
resistance to dust, solid objective and moisture
insulation resistance and electric strength.
Creepage and clearances distances
endurance and thermal test
resistance to heat , fire and tracking
screw terminals
screwless terminals and electrical connections

led-lamps , led bulb , led based street lights , flood lights , tube lights , dc or ac supplied electronic control gear for led modules , indoor-outdoor led luminaires etc

popular standards for led product testing are lm 79 , is 16106:2012 , iec 61347-2-13 , iec 62384, iec62722-2-1, iec 62031, is 15885(part2sec13), is 16103, is 16102, iec 62612, iec 60969 etc

We, ITC India, are a leading testing companylaboratory having a NABL (Certificate No. T 1811) accreditation. The Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO 17025 by NABL and IABCBL.
Our lab is totally equipped with following high accuracy testing instruments to provide a total testing solution for LED based product
High Precision CCD Spectroradiometer
Digital Power Meter (RS-232 Model)
Digital CC and CV DC Power Supply
Integrating Sphere (Diameter=2.0M)
Standard Light Source (24V50W)
LED Power Driver Tester
Electrical Safety analyzer and more
We can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc
Also we can help you to get CE Certification.

We can do safety testing against below international standard like
iec 61010-1 : lab instruments
iec 60204-1 : control panel
iec 60595 : led luminary
iec 61347 : lamp control gear
iec 60950 : information technology equipments
iec 60601 : electromedical equipmets
iec 60065 : audio video & similar product
iec 61439 : low voltage switchgear & control gear assemblies
iec 60034 : rotating electrical machine and more contact us for more information.

We have developed a special testing facility against solid particle protection & liquid ingress protection generally called as the ip testing. We have below test facility at present in our lab;
1. Ip 1x, ip 2x, ip 4x for protection of machine against penetration by solid foreign objects
2. Ip 5x for dust protection
3. Ip 6x for dust protection
4. Ip x7, ip x8, ip x5 & ip x6 for protection against ingress of water.

also we can offer you lm 79 testing for ssl product.

We are offering cable gland testing services.
Bs 6121: specification for mechanical cable glands for elastomer and plastics insulated cables en 62444: cable glands for electrical installations test carries out under this standard.
Cable retension test cable anchorage test cable anchorage twist test impact test
torque test ingress protection (ip) test electrical continuity test insulation resistance test and more

We focus on the following industries product emcemi testing:
industrial electronics
consumer electronics
telecommunications
medical
we can do the following emc testing on your product.
Test
as per standard
electrostatic discharge immunity test(esd test)
iecen 61000-4-2
electrical fast transientburst immunity test
iecen 61000-4-4
surge immunity test
iecen 61000-4-5
voltage dips, short interruptions and voltage variations immunity tests
iecen 61000-4-11
limits for harmonic current emissions (equipment input current 16 a per phase)
iecen 61000-3-2
limitation of voltage changes, voltage fluctuations and flicker
iecen 61000-3-3

We are offering environmental testing services as per is 9000 & iec 60068-
- dry heat
- dry cold
- damp heat(steady state)
- damp heat(cyclic)
- damp heat(composite)
- humidity freeze(cyclic)
- temperature cycling & more.

We are offering transformer testing services.
Iecen 61558-1: safety of power transformers, power supply units and similar -- part 1: general iecen 61558-1: safety of power transformers, power supply units and similar -- part 1: general requirements and testssome of the test carried out on transformer
as per iec 61558

protection against electric shock
protection against harmful ingress
output voltage and output current
insulation resistance, dielectric
no-load output voltage
construction
short-circuit voltage
creepage distances, clearances
short-circuit and overload protection