Jacco Cables Pvt. Ltd.

Vishwas Nagar, Delhi

JACCO 3 core flat submersible cables are manufactured keeping in mind the severe and difficult conditions in which they are required to perform. Submersible cables are used for submersible pumps in deep well. Jacco submersible cables are manufactured keeping in mind the hostile environment of installation of the cable in which they have to be performed. Conductor Each cable is manufactured with electrolytic grade bright annealed bare copper conductor, uniformly bunched to ensure flexibility and uniform resistance, which also helps in saving electricity. Insulation The cable is insulated with specially formulated superior grade of PVC compound which offers high insulation resistance and necessary electrical strength. The insulation is resistance to moisture, oils, etc giving long life and electrical safety. Sheath The cores are laid up in flat parallel position. The outer sheath of the cable is made from a special grade of abrasion resistance PVC compound resistant to water, alkalies, moisture, etc. Quality Assurance High quality standards are built into every 'JACCO' product. Rigid tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that JACCO Cables meet customer satisfaction. Packing The above cables are supplied in coils of 90Mtrs. Length or wooden drum of 500 Mtrs.

JACCO Coaxial Cables are widely use today in buildings, offices, hotels, hospitals, residential complexes etc., and has gained confidence among viewers by delivering quality transmission of True Picture & True Sound. Conductor JACCO Coaxial Cables are made of high conductivity electrolytic grade annealed bare solid copper conductor. Dielectric Gas Injected Physical Foam Polyethylene. Shielding Poly-aluminium Tape Braided With Aluminium Alloy with Minimum 60% Coverage. This double screening provides better attenuation values compared with cable with single screen. Jacket After screening the outer jacket is extruded with special grade PVC which is abrasion resistant. Quality Assurance High quality standards are built into every 'JACCO' product. Rigid tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that JACCO Cables meet customer satisfaction. Typical Application JACCO coaxial cable is the most common cable used for Transmission of audio and Video Signals and in CATV System.

JACCO Power Cables are used for transmission of power in power plants, industries, projects and all other electrical installations. The power cables manufactured by us are reckoned for its wide range and applications in various industries. Conductor Aluminium Conductor conforming to IS: 8130:1984. Insulation Conductor is insulated with specially formulated superior grade of PVC compound as per IS: 5831:1984 which offers high insulation resistance and necessary electrical strength. The insulation is resistance to moisture, oils, etc giving long life and electrical safety. Pairing Two cores are uniformly twisted together to form a pair with maximum lay length 80 mm. The lay shall be so chosen as to minimize cross talk in the cable. Laying of Cores Cores are laid up with a suitable lay. The Final layer direction shall be kept right hand lay./p> Sheath The outer sheath of cable is done with special grade PVC Compound, conforming to IS: 5831:1984. Quality Assurance High quality standards are built into every 'JACCO' product. Rigid tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that JACCO Cables meet customer satisfaction. Voltage These cables can be used on Voltage grade upto & including 1100 V. For complete details refer to our brochure Dislcaimer: All the information given here is in good faith. Jacco Cables Pvt Ltd will not be liable for any kind of damages arising out of incorrect usage or interpretation.

"JACCO" brand PVC Insulated & PVC Sheathed Multicore Flexible Cables are conforming to IS: 694/1990 and are suitable for Fixed Wiring & Flexible Operation. These cables have a wide range of application in machinery, tools, appliances, control panels and industries. Conductor Each cable is manufactured with electrolytic grade bright annealed bare copper conductor, uniformly bunched and having uniform resistance, which also helps in saving electricity. Insulation The cable is insulated with specially formulated superior grade of PVC compound which offers high insulation resistance and necessary electrical strength. The insulation is resistance to moisture, oils, alkalies, grease etc giving long life and electrical safety. Sheath In Multicore cables, the cores are laid up to form the core assembly. The cores are coded with a colour scheme as per IS 694/1990. The sheathing is applied with specially formulated PVC compound to facilitate not only easy stripping but also to ensure toughness to with stand mechanical abrasion while on use. Quality Assurance High quality standards are built into every 'JACCO' product. Rigid tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that JACCO Cables meet customer satisfaction.

Each cable is manufactured with electrolytic grade bright annealed bare copper conductor, uniformly bunched and having uniform resistance, which also helps in saving electricity. Insulation The cable is insulated with specially formulated superior grade of PVC compound which offers high insulation resistance and necessary electrical strength. The insulation is resistant to moisture, oils, alkalies, etc. The insulation process is carried out on modern high speed extrusion lines with accuracy, ensuring consistent perfect eccentricity and overall diameter of wires. Quality Assurance High quality standards are built into every 'JACCO' product. Rigid tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that JACCO Cables meet customer satisfaction.

Today communication has become the basic need in our lives. JACCO telecommunication cables are designed to reduce cross talking and to increase voice clarity. Our telecommunication cables are most suitable for use in offices, buildings, hospitals, industries, PBX and in central exchange for interconnection of distribution framer switching and transmission equipments, etc. Conductor Solid Annealed High Conductivity, uniform coated with Tinned, Electrolytic Grade Copper Conductor of diameter 0.5mm. Insulation Specially formulated high grade PVC Compound capable of withstanding higher conductor temperature in different colours. Pairing Two cores are uniformly twisted together to form a pair with maximum lay length 80 mm. The lay shall be so chosen as to minimize cross talk in the cable. Laying of Pairs The Layers in cables shall be stranded with a suitable left hand lay. The Stranding lay of all other cable cores shall be alternate. The cable shall be wrapped with polyester tape. Rip Cord A nylon rip cord shall be laid up longitudinally under the sheath for effective means of slitting the sheath longitudinally to facilitate removal without damaging the insulated cores. Sheath The Laid up of pairs are covered with specially formulated PVC Compound of Grey colour. The sheath shall be uniform and tightly fitted of overall diameter.

CAT 5E UTP (Unshielded Twisted Pair) cables are very effective network cabling system used in modern computer networks. CAT 5 UTP Cables are eminently capable of handling 100 Mbps data rates. The Jacket of LAN cable is made of special grade PVC Compound.