Our Products
Include manual end cutter for maximum edge banding thickness 0.3 to 1mm.
Include manual edge trimmer for maximum edge banding thickness 0.3 to 0.6mm.
Model No | Unit | J-1000.in |
Minimum work piece length | mm | 200 |
work piece thickness range | mm | 10 - 40 |
Edge Banding Thickness for PVC & ABS in coil form | mm | 0.4 - 3.0 |
Min-Radius for curved Edging | mm | 20 |
Feed speed | m/min | 4 |
Front table tilt angle | degree | n/a |
Heating element | kw | 0.75 |
Electric motor | kw | 0.15 |
Power supply | voltage / ø | 220V , 1ø |
Heavy duty precision Sliding Table
Runs on large rollers sandwiched between hard chromed guide bars. Hollow multi-chamber alu. extrusion guarantees optimal torsion resistance & rigidity
Lifting and tilting of saw unit by means of hand wheels on the machine. Both wheels are placed on front side for more convenience. Along with user friendly control panel with Electronic Digital readout of saw unit tilt.
The rubber drum can be fitted on both ends to fully utilize the entire spindle.
1 no. ele motor 1 HP/1440 RPM, 05 nos different sizes of rubber rolls, table inserts, electrical switch, toolkit & m/c manual.
Model | J-802 |
mm / inch | |
Table size | 610 x 610 / 24" x 24" |
Oscillation per minute | 75 |
Oscillation stroke | 40 / 1½" |
Spindle speed - RPM | 1440 |
Table tilt - degree | 45° |
Size Of Dust Collecting Port - Dia | 100 / 4" |
Power required - HP/RPM | 1 / 1440 |
Approx. Weight of machine - kg | 170 |
Sanding platen can be adjusted horizontally or vertically for surface sanding.
1 no. ele motor 1.5 HP/2800 RPM (3-phase), sanding belt, mitre gauge, end table, starter, toolkit & m/c manual.
Model | J-800 |
mm / inch | |
Sanding belt size | 150 x 1220 / 6" x 89" |
Table size | 750 x 254 / 29.5" x 10" |
Spindle (RPM) | 2800 |
Power required - HP/RPM | 1.5 / 2800 |
Approx. Weight of m/c - kg | 125 |
Heavy duty machine with specific chisel tool makes chisel mortising so easy for single component square slots. Pneumatic head lowering for greater safety, precision and easy operation.
01 no. electric motor of 1 HP-2800 RPM-3 phase, R/F Switch, " chisel set, drill chuck, toolkit & m/c manual.
Note:Must use better quality Chisel for good performance of Machine.
Model | J-1920 |
mm / inch | |
Table size | 530 x 200 / 21" x 8" |
Max. Chisel Capacity | 6mm to 19mm |
Max. depth of cut | 90 / 3½" |
Cross movement of table | 100 / 4" |
Longitudinal movement of table | 305 / 12" |
Max. height of workpiece of table | 150 / 6" |
Up/Down movement of table | 90 / 3½" |
Air pressure required (kg / cm²) | 5 to 7 |
Power required (HP / RPM) | 1 / 2800 |
Approx. Weight of machine - kg. | 235 |
Heavy duty machine with specific chain tool makes chain mortising so easy for single component of rectangle slots.
1 no. electric motor of 3 HP/1440 RPM-3 phase, " chain set, R/F switch, oil bowl, grinding wheel & V-belt fitted in grinding attachment, toolkit & m/c manual.
Note:M/c with motor of 1.5 HP 1-phase at extra cost.
Model | J-930(H) |
mm / inch | |
Table size | 560 x 255 / 22" x 10" |
Up/Down movement of table | 90 / 3½" |
Cross movement of table | 100 / 4" |
Longitudinal movement of table | 305 / 12" |
Max. depth of cut | 140 / 5½" |
Power required HP/RPM | 3 / 1440 |
Approx. Weight of machine - kg. | 340 |
Heavy duty machine with specific chain tool makes chain mortising so easy for single component of rectangle slots.
1 no. electric motor of 3 HP/1440 RPM-3 phase, " chain set, R/F switch, oil bowl, grinding wheel & V-belt fitted in grinding attachment, toolkit & m/c manual.
Note:M/c with motor of 1.5 HP 1-phase at extra cost.
Model | J-930 |
mm / inch | |
Table size | 550 x 290 / 21½" x 11½" |
Up/Down movement of table | 75 / 3" |
Cross movement of table | 100 / 4" |
Longitudinal movement of table | 305 / 12" |
Max. depth of cut | 140 / 5½" |
Power required HP/RPM | 3 / 1440 |
Approx. Weight of machine - kg. | 400 |
Heavy duty wood clamping facility for accurate tenoning with easy table movement.
2 no. electric motor of 2HP / 2800 RPM ( 3-phase), 2 nos. carbide cutter blocks, mitre gauge, mitre guage with wood clamping facility, toolkit & m/c manual.
Model | J-919 |
mm / inch | |
Table size | 535 x 203 / 21" x 8" |
Table movement | 200 / 8" |
Max. Length of tenon | 150 / 6" |
Top cutter block horizontal adustment | 12.5 / ½" |
2 Nos. Electric motor - Tenoning (HP/RPM) | 2 / 2800 |
Approx. weight of machine - kg | 275 |
Tenoning width & depth is adjustable within specified limits, The tenoning axis can be horizontal, vertical or 45 by changing the data in PLC unit.
Model No | J-1941 |
mm / inch | |
Max. width of tenon | 100 / 4" |
Max.depth of tenon | 70 / 2¾" |
Max.thickness of tenon | 25 / 1" |
Diameter of cutter | 30 / 1"/16" |
Spindle speed-RPM | 9500 |
Motor power-kw | 2.2 |
Grinding process by handwheel is so smooth dua to gear type design.
Grinding wheel safety guard, motor pulley, motor plate
Extra Accessories :Grinding wheel
Model | J-234 | J-235 | J-236 |
mm / inch | mm / inch | mm / inch | |
Max. grinding capacity | 330 / 13" | 455 / 18" | 610 / 24" |
Grinding wheel Diameter | 150 / 6 " | 150 / 6 " | 150 / 6 " |
Power required - HP / RPM | 0.5 / 1440 | 0.5 / 1440 | 0.5 / 1440 |
Approx. wt. of machine - kg. | 70 | 80 | 90 |
Grinding process by handwheel is so smooth dua to gear type design.
Grinding wheel safety guard, motor pulley, motor plate
Extra Accessories :Grinding wheel
Model | J-234 C | J-235 C | J-236 C |
mm / inch | mm / inch | mm / inch | |
Max. grinding capacity | 330 / 13" | 455 / 18" | 610 / 24" |
Grinding wheel Diameter | 100 / 4 " | 100 / 4 " | 100 / 4 " |
Power required - HP / RPM | 0.5 / 1440 | 0.5 / 1440 | 0.5 / 1440 |
Approx. wt. of machine - kg. | 75 | 85 | 95 |
Grinding process is saw basic and easy by moving top slide.
Grinding wheel safety guard, motor pulley.
Extra Accessories :Grinding wheel
Model | J-124 | J-125 |
mm / inch | mm / inch | |
Max. grinding capacity | 330 / 13" | 455 / 18" |
Grinding wheel Diameter | 150 / 6 " | 150 / 6 " |
Power required - HP / RPM | 0.5 / 1440 | 0.5 / 1440 |
Approx. wt. of machine - kg. | 30 | 35 |
Widely used for low air suction capacity with single bag construction.
Statically balanced high speed impellers give vibration free efficient suction.
Widely used for medium & high air suction capacity with double bag construction.
Statically balanced high speed impellers give vibration free efficient suction.
Model No | Unit | DC 21.in | DC 31.in | DC 32.in | DC 52.in | DC 72.in |
Micron rating of fabric filter bag | - | 30 | 30 | 30 | 30 | 30 |
Air suction capacity | m3/hr | 1500 | 2000 | 2200 | 4000 | 6500 |
Motor-3 Ø | hp | 2 | 3 | 3 | 5 | 7.5 |
Sturdy Multi Chamber section
The multi-chamber system builds superior torsion-resistance and maximizes the rigidity of the double roller carriage, assuring precision movement
The multi-chamber system builds superior torsion-resistance and maximizes the rigidity of the double roller carriage, assuring precision movement
For the professionals who value multi-functionality and precision workmanship
Combiplaners are combined Surfacer & Thicknesser m/cs. These are same high value machines like Combimax, but with fixed top. Combining precision and multi functionality in a machine that can work wonders for a professional set-up.
Easy & fast changing of saw-scoring blades
The machine allows the ease of scoring adjustment from front side. Entire saw unit is on heavy duty cast-iron trunnion.
Smooth-running and powerful saw unit
It is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly, because it is electronically balanced as a fully assembled unit, and extensive use of cast components in the making. The high precision vertical movement of the unit is linear with maintenance -free guide bearings & allows the whole unit to tilt easily & precisely to exactly the correct angle.
Eye-level operating panel for the ease of operation
All major control functions are always visible. The panel pivots into the most convenient position & is accessible from both sides of the machine.
Digital Read Out (DRO) Optional
Crosscut mitre fence is equipped with DRO that displays the job length digitally. This enables a setting precision accuracy of +/- 0.1 mm.
Advanced Saw Carriage:An advanced saw carriage with high feed rate driven by rack / pinion and guided on hard guide rods that ensures high cutting accuracy. A uniform holding pneumatic clamping beam ensuring synchronized cylinder actuation at both ends.Saw Carrige Drive Motor:The saw carriage is driven by a motor. Variable feed speed for different applications.
Scoring Saw blade Adjustment:Can be adjusted vertically for depth of cut control. Once wear occurred, adjust its position for compensation.The scoring saw blade also can be adjusted laterally for alignment to main saw blade
Model No | Unit | J-320 MB |
Capacity | ||
Cutting dimensions | mm | 3200 |
Max. cutting thickness | mm | 80 |
Main saw unit | ||
Max. blade diameter | mm | 355 |
Arbor diameter | mm | 30 |
Main saw blade speed | rpm | 5600 |
Main blade projection | mm | 85 |
Scoring saw unit | ||
Max. blade diameter | mm | 160 |
Arbor diameter | mm | 20 |
Scoring saw blade speed | rpm | 7200 |
Saw carriage | ||
Feed speed | m/min | 6-30 |
Retract speed | m/min | 30 |
Motors | ||
Main saw unit, motor | hp | 15 |
Scoring saw motor | hp | 1 |
Saw carriage motor | hp | 3 |
Floating table blower motor | hp | 4 |
Other Specifications | ||
Working air pressure | kg/cm2 | 5 to 6 |
Dust extraction port diameter | mm | 100 |
Round Cornering :
A)Compact and powerful high frequency two motors guarantees best finish on edge, sliding on two heavy prismatic guideways with recirculation ball bearings
B)Trimmer 2R cutter for PVC/ABS gives perfect rounding on edge of straight, chamfered and post formed panel
Buffing :Independently adjustable buffing wheels, for cleaning & polishing of the panel edges. It can be adjustable at a particular angle to maximize it's effect for better finishing of work piec and increase the life of buffing wheels.
Control Panel :Easy accessible user friendlySmart TouchPLC control panel positioned at machine in-feed, for easy & quick operations
Pre -Milling (For J-5700PRc.in) :
A)An optimal unit for panel edge pre-milling with two high frequency compact motors
B)Individual pneumatic cylinder prepares perfect panel for gluing
C)Smooths the panel for achieving perfect joint line of the edge
The Feed Track :Robust feed chain & conveyor system with German gearbox gives straight movement & effective pressure on small / big panels
Edge Scraping & Cleaning Agent :
A)Gives the best finishing touch to the PVC/ABS edges , leaving no trimming marks on the panel
B)Unit complete with rotating copiers
C)Scraping unit with an extraction hood complete with a suitable container and filter for long chips.
D)In order to prevent glue to adhere on panel, this liquid is sprayed to lower & upper edge surface of the panel