Our Products
It is used for compaction and widely used for compaction of gravel, silt as well as asphalt pavement. It is most useful in places where road roller is unable to reach.
This versatile machine is self driven and self propelled with power and librations mode. It is very easy to handle and move from site to site. It is known for high performance, excellent speed and load bearing capacity. These cater to the needs of varies industries. Our range is fabricated from high grade material with rigid frame structure and chassis.
Description | JWRS10 | JWRS20 |
Working Weight | 180-220 kgs | 450-550 kgs |
Working Width | 560 mm | 560 mm |
Actual load | 2.9 kg/cm | 6.3 kg/cm |
Walking speed | 1.6 km/hr | 1.6 km/hr |
Frequency | 4620/rpm | 4620/rpm |
Centrifugal Force | 10 Kn | 20Kn |
Motor /engine | 5hp (electric/Petrol) | 10 hp (electric/petrol/diesel) |
Drum type | Single drum | Double drum |
Forward/reverse action | Optional | Optinal |
Safety arrangement | Hand kill switch | Hand kill switch |
Drive | Belt/chain | Belt/chain |
Water tank arrangement | Optional | Optional |
We are renowned manufacturer & exporter of extensive range of mixers, which include Reverse Drum Mixer & Transit Mixer. Our state of the art manufacturing unit with high-tech machinery types to manufacture these Mixers in line with the defined industry standard. These are widely used for homogenous mixing of concrete, cement and other construction material. In the mixer with the reverse action loading from one end, mixing and unloading from the other ends tends to be easy and time saving. The mixing operation in the drum and weighing and loading of skip is carried out with help of a panel box. Reversible non-titling drum type concrete mixer with hydraulic operating loading. Skip hopper driven back hydraulic cylinder. Rationalized planning and optimized design has made it robust and will require little maintenance. Drum rotation reversal is actioned by push button provided on the electric control panel.
The ascent and descent of skip is controlled by the lever of the hydraulic system distributor. The rotation parts are installed or self lubrication water tight bearing. Transmission from 3 phase motor is done by V belt 4 Nos?? which allow very cushioned reversion of drum rotation and reduction or stress on mechanical components.
RD type concrete mixer loading skip driven by hydraulic cylinder. The mixer is run on 3 phase electric motor. The machine show high mechanical performance. There is very little maintenance for the concrete mixer. Separate 5 hp electric motor for hydraulic pump of hopper.
Advantage : -
Double stage heavy duty square tube design chasis low maintenance, high performance. Suitable discharge, height for Concrete Pump & tough rider. Hydraulic cylinder for skip (hopper). Inbuilt load cell based digital weighting system (4 bin) automatic water dispenser to maintain the accuracy of correct cement water ratio. Automatic weighting system maintains correct weight every time. 100% homogenous cement mixing with help of reversible blade technology, more durability less wear and tear.
Application : -
Fix load cell input, automatic water dispenser, Admix, dozing control, auto weight off set adjustment 12.5 hp electric motor.
Specifications :
DESCRIPTION | UNITS | JM 500 | JM 750 | JM1050 | JM 750 D |
Skip loading capacity | Liter | 500 | 750 | 1050 | 750 |
Output per hour | Cu. M. | 8 | 10 – 12 | 15 – 17 | 10 – 12 |
Output per batch | Cu. M. | 0.4 | 0.5 | 0.8 | 0.5 |
Hydraulic system working pressure | Bar | 90 | 90 | 90 | 90 |
Test pressure | Bar | 120 | 120 | 120 | 120 |
Crompton Greaves make electrical motor three Phase – 440 v | H.P. | 10 | 12.5 | 15 | 20 |
Water Motor 1 Phase | H.P. | 0.5 | 0.5 | 0.5 | 0.5 |
Overall Dimensions | Lenth mm | 3300 | 3470 | 4000 | 3470 |
Width mm | 2100 | 2100 | 2300 | 2100 | |
Height mm | 3000 | 3350 | 3100 | 3350 | |
Pneumatic wheels | Nos. | 600x19 4 Nos. |
600x19 4 Nos. |
720x19 4 Nos. |
600x16 4 Nos. |
No.of Bins in the hopper | No. | 3 Nos. | 4 Nos. | 3 Nos. | |
Hopper Drum etc. made from M. S. Sheet | mm | 3 & 4 | 4 & 6 | 4 & 6 | 4 & 6 |
Self Lubrication System | Yes | Yes | Yes | ||
Inbuilt Vibrating Motor | H.P. | 2 HP | 2 HP | 2 HP | |
Machine Weight | Kg | 2000 | 2500 | 4000 | 2500 |
The wide range of transit mixer offered by us is precision engineered using high grade raw material to ensure long service life. The high mixing capacity and maximum discharge output of these machines make our range highly demanded in the international market. Further, the drum and spiral or fabricated from highly wear resistant steel to increase the stability.
Transit Mixer having capacity of 8 cum/h, having Kirloskar engine HA494 capacity 60 tg. We are using Eaten 54 hydraulic motor. Gear box is Bonfiglioli 577C. Drum seal thickness is 8 mm & drum thickness?? Is 5 mm No of Rollers 2.
Drum |
Nominal capacity | M3 | 6 |
Geometric Volume | M3 | 10 |
Filling ratio | % | 59 |
Drum speed | RPM | 0-14 |
Diameter | Mm | 2200 |
Rollers | No | 2 |
Water pump | L/min | 375 |
Water pump pressure | Bar | 3 |
water meter scale | L | 0-400 |
Water tank capacity | L | 400 |
Total weight | Kg | 3400 |
The most important aspect of the Double Beam is that it is used for leveling and not for dragging concrete. Before using the Double beam, one must use needle vibrator. It is self driven and only to be guided along the form work by two operators, one at each end. Use of Double Beam is the first step in the VDS for proper compaction and surface level. It is used for making surface smooth and level in one uniform platform. It vibrates surface area and removes air bubbles and spores from concrete. It is made of spring steel having spring properties. It is strongly fitted with four stress bolts which are adjustable. If it gets bent, it can be brought back to normal position by adjusting the stress bolts. It has 2 hp vibrating motor to give proper surface vibrations. Vibrations can be adjusted at 7 different levels. These vibrations have an effect up to maximum 12 depth. Its approx. wt. is 100 Kg. We have standard size of 4.2 M. It can also be tailor made.
the ride on trowel is an additional tool for super flat flooring. The jamshedji ride on trowel is capable of covering up to a maximum of 3000 m2 of flooring in a days work. As compared to the walk behind trowel the ride on trowel has the following advantages.
1. 10 time more coverage of area within the same working time.
2. Lesser labour required to cover lager areas
3. Lesser labour fatigue
4. Higher quality of finishing.
5. Not required to move around manually on freshly laid concrete.
MODEL | JRD 836 | JRD 836 E |
Engine | Honde 24 HP/BBS Vanguard 22 HP | 5 HP x 2 Motors |
Start Elec.starter | Elec.starter | |
Overlap | No | No |
Net Weight (KG) | 270 | 248 |
Working Weight (KG) | 330 | 278 |
Blades Speed (Rpm) | 140 | 140 |
Working Width (MM) | 1880 | 1770 |
Size (MM) | 1900x1000x1050 | 1900x1000x1050 |
We are the main supplier of this product.
Our organization is offering an extensive range of rammer which is precision engineering in accordance with different industry standard. These rammers are compatible for paving, block laying, and industrial flooring. Therefore they find application in construction industry.
Rammer is a very useful devise for compaction after filling murrum. Various models are available as per clients requirement. Rammers are known for features like sturdy and precise configuration, superior finish and rust resistance. We offer these earth rammer machines to our clients at most competitive pricing.
MODEL | JR 1000 Electric |
JR 3000 Electric |
JR 5000 Electric |
JR 3000 Diesel/petrol |
Length of compaction shoe | 700MM | 700MM | 700MM | 700MM |
Width of compaction shoe | 500MM | 500MM | 500MM | 500MM |
Over all length | 1500mm | 1500mm | 1500mm | 1500mm |
Over all Width | 500mm | 500mm | 500mm | 500mm |
Overall height | 1500mm | 1500mm | 1500mm | 1500mm |
Travel speed | 10m/min | 10m/min | 10m/min | 10m/min |
Depth of compaction | 30Cm | 75Cm | 100Cm | 75Cm |
Weight | 150kg | 175kg | 175kg | 190kg |
Motor/Engine | 2HP Electric Motor | 3HP Electric Motor | 5HP Electric Motor | 3HP Petrol 5HP Diesel |
The scarifier is a very useful equipment for surface preparation for colour coatings as well as epoxy coatings on concrete
floors.
Advantages of scarifier :
1. Lager area coverage per working days compared to manual
2. No vibration or further cracking of flooring like in manual process
3. Can remove an entire upper coat of flooring with additional attachments
4. Can be also used for roughing of flooring in microns.
5. Below is the Table for Scarifier
Model | JS 300 | JS 750 | JS 1000 | JS 1000 H |
Working width | 150/190mm | 300mm | 450mm | 450mm |
Max Depth | *15mm | *25mm | *25mm | *25mm |
Max Depth in one pass | 2mm | 4mm | 6mm | 6mm |
Drive | Electrical 3hp | Electrical 7.5hp | Electrical 15hp | Electrical / Hydraulic |
Movement | Manual | Chain Drive | Chain Drive | Hydraulic |
Output m2 / h | 25 m2/h | 50 m2/h | 75 m2/h | 75 m2/h |
Vacuum Pump | Optional | Optional | Optional | Included |
Total Cutters | 80 nos | 120 nos | 180 nos | 180 nos |
Auto Drive | - | - | - | Complete Auto Drive |