Our Products
We are offering oil hole covers. Designed for a drive fitin a drilled hole, shoulder permits insertion to a pre determined depth abeautiful and economical means for oiling.
We are offering spring type dividers. Dividers have there points hardened and grounded to facilitate the marking out of the circles on the steel or the transference of measurements from a master template .
These are the finest grade of oil cups. the wick acts as a self starting syphon and delivers a slow and steady supply of oil. It functions as a filter and only clean oil is delivered to the bearings. The nipple is made from hexagonal bar steel. The thread on the nipple allows it to screw properly to the hexagonal shoulder, thus getting a lock grip which does not shake loose.
Code | Size(L) | Threads | |
B.S.P. | B.S.W. | ||
J/OC/12 | ½ ” Dia | 1/8” | 3/8” |
J/OC/58 | 5/8” Dia | 1/8” | 3/8” |
J/OC/34 | ¾ ” Dia | 1/8” & ¼” | 3/8”&½” |
J/OC/78 | 7/8"Dia | 1/8” & ¼” | 3/8”&½” |
J/OC/01 | 1"Dia | 1/8” & ¼” | 3/8”&½” |
J/OC/114 | 1 ¼” Dia | ¼” | ½” |
J/OC/112 | 1 ½” Dia | ¼” | ½” |
J/OC/02 | 2” Dia | ¼” | ½” |
We are offering brass oil gauges. Designed for reliable performance, the oil gauges provided by us are made with qualitative brass. These oil gauges are corrosion resistant, have long serving life and easy to install. Confirming to highest standard of quality, our brass oil gauges are widely accepted by our valuable clients. Moreover, we offer them at undermentioned specifications.
Designed for reliable performance, the oil gauges provided by us are made with qualitative brass. These oil gauges are corrosion resistant, have long serving life and easy to install. Confirming to highest standard of quality, our brass oil gauges are widely accepted by our valuable clients. Moreover, we offer them at undermentioned specifications.
Code | Threads | ||
J/BG/2 | 1/2” BSP | ||
J/BG/3 | 1/4” BSP | ||
J/BG/4 | 1/4” BSP | ||
J/BG/6 | 1/8” BSP | ||
J/BG/8 | 1/8” BSP |
With technological advancement, we engineered a broad collection of elbow oilers. The elbow oilers are engineered using the finest raw material that provides them spectacular durability. These are manufactured in accordance with international standards of quality. Our comprehensive range is available in below mentioned technical specifications.
Code | Size(L) | Threads | |
B.S.P. | B.S.W. | ||
J/EL/12 | ½ ” Dia | 1/8” | 3/8” |
J/EL/58 | 5/8” Dia | 1/8” | 3/8” |
J/EL/34 | ¾ ” Dia | 1/8” & ¼” | 3/8” & ½” |
J/EL/78 | 7/8” Dia | 1/8” & ¼” | 3/8” & ½” |
J/EL/01 | 1” Dia | 1/8” & ¼” | 3/8” & ½” |
J/EL/114 | 1 ¼” Dia | ¼” | ½” |
J/EL/112 | 1 ½” Dia | ¼” | ½” |
J/EL/02 | 2” Dia | ¼” | ½” |
The grease cups are steel throught and the shanks have nipples of solid bar. they are both stronger and more durable . the thread on the shanks allows it to screw solidly to the hexagon shoulder, thus thus giving a lock grip which does not shake loose.
The cap is screwed right to the back and discharges the whole content for filling, giving maximum grease feed capacity for each size.
Also available in MOTTO TYPE and SPRING BALL TYPE
No. | Size(L) | |
inch | mm | |
J/GC/1 | 3 | 75 |
J/GC/2 | 4 | 100 |
J/GC/6 | 6 | 150 |
J/GC/8 | 8 | 200 |
J/GC/10 | 10 | 250 |
J/GC/12 | 12 | 300 |
|
|||||||||||||||||||||||||||||||
With our expertise in the industry, we manufacture an extensive collection of aluminum oil glass windows. Highly durable and corrosion resistant aluminum oil glass windows are delivered with zero defect at the desired destination within stipulated time period. We offer our product range in the following technical specifications.
Code | Size | |||
J/AW/14 | 1/4” BSP | |||
J/AW/38 | 3/8” BSP | |||
J/AW/12 | 1/2” BSP | |||
J/AW/34 | 3/4” BSP | |||
J/AW/01 | 1” BSP | |||
J/AW/114 | 1 ¼” BSP | |||
J/AW/112 | 1 ½” BSP | |||
J/AW/02 | 2” BSP |
These oilers have shut off and needle valve oil feed adjustment features. A sight glass in shank is provided so that the operator can adjust the feed to proper volume.
this type of oiler is especially adopted where regulation of the oil feed is required.
these oilers are recommended where supply of oil under visible control is required
No. | Size | Capacity | Threads |
J/SDO - 1 | 30 M.M. | 20 M.L. | 1/8” or1/4” B.S.P. |
J/SDO - 2 | 40 M.M. | 50 M.L. | 1/8” or1/4” B.S.P. |
J/SDO - 3 | 52 M.M. | 100 M.L. | 1/4” B.S.P. 3/8” B.S.P. |
J/SDO - 4 | 62 M.M. | 170 M.L. | 1/4” or 3/8” B.S.P. |
J/SDO - 5 | 77 M.M. | 320 M.L. | 3/8” or 1/2” B.S.P. |
J/SDO - 6 | 88 M.M. | 500 M.L.x | 3/8” or 1/2” B.S.P. |
Dividers have there points hardened and grounded to facilitate the marking out of the circles on the steel or the transference of measurements from a master template .
No. | Size(L) | |
inch | mm | |
S/DD/3 | 3 | 75 |
S/DD/4 | 4 | 100 |
S/DD/6 | 6 | 150 |
S/DD/8 | 8 | 200 |
S/DD/10 | 10 | 250 |
S/DD/12 | 12 | 300 |